diff --git a/.drone.yml b/.drone.yml
index ede9512..553ff69 100644
--- a/.drone.yml
+++ b/.drone.yml
@@ -40,7 +40,7 @@ steps:
   - cd gateway
   - service ser2net stop
   - pio run -e pro-mini
-  - echo -n 'reset' > /dev/ttyUSB0; sleep 1s; avrdude -patmega328p -carduino -P/dev/ttyUSB0 -b115200 -D -Uflash:w:.pio/build/pro-mini/firmware.hex:i -v
+  - echo 'reset' > /dev/ttyUSB0; sleep 1s; avrdude -patmega328p -carduino -P/dev/ttyUSB0 -b115200 -D -Uflash:w:.pio/build/pro-mini/firmware.hex:i -v
   - service ser2net start
   when:
     target:
diff --git a/gateway/platformio.ini b/gateway/platformio.ini
index 52c39a9..474b439 100644
--- a/gateway/platformio.ini
+++ b/gateway/platformio.ini
@@ -22,6 +22,7 @@ lib_deps =
 	bblanchon/ArduinoJson@6.19.4
 	adafruit/Adafruit Unified Sensor@^1.1.4
 	adafruit/DHT sensor library@1.3.10
+	https://git.hodos.ro/arduino/lib_serial-reader.git@^1.0.0
 build_flags = -D DHT_SENSOR=0
 upload_port = /dev/ttyUSB0
 check_tool = cppcheck
diff --git a/gateway/src/gateway.cpp b/gateway/src/gateway.cpp
index 04fd607..fafb287 100644
--- a/gateway/src/gateway.cpp
+++ b/gateway/src/gateway.cpp
@@ -3,6 +3,7 @@
 #include "Dht.h"
 #include "Protocol_1.h"
 #include "Protocol_2.h"
+#include <SerialReader.h>
 
 #define RESET_PIN 10
 #define SEND_PIN 11
@@ -10,6 +11,7 @@
 
 
 RCSwitch mySwitch = RCSwitch();
+SerialReader<200> serialReader;
 
 void setup() {
 	digitalWrite(RESET_PIN, HIGH);
@@ -60,47 +62,42 @@ void readRcSwitch() {
 	}
 }
 
-void runJsonCommands(const char* cmd) {
-	StaticJsonDocument<512> jsonArray;
-	DeserializationError err = deserializeJson(jsonArray, cmd);
+void handleJsonError(DeserializationError err, const char* cmd) {
+	StaticJsonDocument<50> jsonError;
+	JsonObject error = jsonError.createNestedObject("error");
+	error["msg"] = err.c_str();
+	error["orig_cmd"] = cmd;
+	serializeJson(jsonError, Serial);
+	Serial.println();
+}
+
+void runJsonCommand(char* cmd) {
+	StaticJsonDocument<50> jsonDoc;
+	DeserializationError err = deserializeJson(jsonDoc, cmd);
 	if (err == DeserializationError::Ok) {
-		JsonArray array = jsonArray.as<JsonArray>();
-		for (JsonVariant jsonDoc : array) {
-			if (jsonDoc.containsKey("rcSwitch")) {
-				JsonObjectConst rcSwitch = jsonDoc["rcSwitch"];
-				Protocol* p = findProtocol(rcSwitch["protocol"]);
-				p->fromJson(rcSwitch, mySwitch);
-				delete p;
-				serializeJson(jsonDoc, Serial);
-				Serial.println();
-			}
+		if (jsonDoc.containsKey("rcSwitch")) {
+			JsonObjectConst rcSwitch = jsonDoc["rcSwitch"];
+			Protocol* p = findProtocol(rcSwitch["protocol"]);
+			p->fromJson(rcSwitch, mySwitch);
+			delete p;
+			serializeJson(jsonDoc, Serial);
+			Serial.println();
 		}
 	} else {
-		StaticJsonDocument<128> jsonError;
-		JsonObject error = jsonError.createNestedObject("error");
-		error["message"] = err.c_str();
-		error["original_cmd"] = cmd;
-		serializeJson(jsonError, Serial);
-		Serial.println();
-
+		handleJsonError(err, cmd);
 	}
 }
 
 void readCommand() {
-	if (Serial.available() > 0) {
-		String cmd = Serial.readStringUntil('\n');
-		if (cmd == "reset") {
+	if (serialReader.readLine(Serial) > 0) {
+		char* cmd = serialReader.getBuffer();
+		if (strcmp("reset", cmd) == 0) {
 			Serial.println("resetting...");
-			delay(200);
+			delay(1200);
 			digitalWrite(RESET_PIN, LOW);
 			Serial.println("resetting failed");
 		}
-		if (cmd.endsWith(",")) {
-			cmd = cmd.substring(0, cmd.lastIndexOf(','));
-		}
-		char buffer[cmd.length()+3];
-		sprintf(buffer, "[%s]", cmd.c_str());
-		runJsonCommands(buffer);
+		runJsonCommand(cmd);
 	}
 }