diff --git a/window1_copy/window1_copy.ino b/window1_copy/window1_copy.ino
deleted file mode 100644
index d288092..0000000
--- a/window1_copy/window1_copy.ino
+++ /dev/null
@@ -1,119 +0,0 @@
-#include <RCSwitch.h>
-#include <avr/sleep.h>
-#include <avr/power.h>
-#include <avr/wdt.h>
-#include <SystemStatus.h>
-
-// Utility macros
-#define adc_disable() (ADCSRA &= ~_BV(ADEN)) // disable ADC (before power-off)
-#define adc_enable()  (ADCSRA |= _BV(ADEN)) // re-enable ADC
-#define enable_pin_interrupts()  (GIMSK |= _BV(PCIE))  // Enable Pin Change Interrupts
-
-// Pins
-#define SWITCH 0
-#define SENDER 2
-#define CONTROLLER 4
-
-RCSwitch mySwitch = RCSwitch();
-char* WND_OPEN  =  "00000000000000000000000001000001";
-char* WND_CLOSED = "00000000000000000000000001100001";
-
-int counter = 0;
-//SystemStatus sys = SystemStatus();
-
-void setup() {
-    
-  pinMode(SWITCH, INPUT_PULLUP);
-  pinMode(CONTROLLER, OUTPUT);
-  digitalWrite(CONTROLLER, LOW);
-
-  mySwitch.enableTransmit(SENDER);
-  mySwitch.setProtocol(2);
-
-  set_sleep_mode(SLEEP_MODE_PWR_DOWN);
-  enable_pin_interrupts();
-  enableWdt();
-//  mySwitch.send(26, 32);
-
-}
-
-void loop() {
-  sleep();
-}
-
-void sendWindowState() {
-  byte state = digitalRead(SWITCH);
-  if (state == HIGH) {
-    mySwitch.send(WND_OPEN);
-  } else {
-    mySwitch.send(WND_CLOSED);
-  }
-}
-
-void sendBatteryStatus() {
-//  mySwitch.send(sys.getVCC(), 32);
-}
-
-long readVcc() {
-  // Read 1.1V reference against AVcc
-  // set the reference to Vcc and the measurement to the internal 1.1V reference
-  #if defined(__AVR_ATmega32U4__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
-    ADMUX = _BV(REFS0) | _BV(MUX4) | _BV(MUX3) | _BV(MUX2) | _BV(MUX1);
-  #elif defined (__AVR_ATtiny24__) || defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__)
-    ADMUX = _BV(MUX5) | _BV(MUX0);
-  #elif defined (__AVR_ATtiny25__) || defined(__AVR_ATtiny45__) || defined(__AVR_ATtiny85__)
-    ADMUX = _BV(MUX3) | _BV(MUX2);
-  #else
-    ADMUX = _BV(REFS0) | _BV(MUX3) | _BV(MUX2) | _BV(MUX1);
-  #endif  
- 
-  delay(2); // Wait for Vref to settle
-  ADCSRA |= _BV(ADSC); // Start conversion
-  while (bit_is_set(ADCSRA,ADSC)); // measuring
- 
-  uint8_t low  = ADCL; // must read ADCL first - it then locks ADCH  
-  uint8_t high = ADCH; // unlocks both
- 
-  long result = (high<<8) | low;
- 
-  result = 1125300L / result; // Calculate Vcc (in mV); 1125300 = 1.1*1023*1000
-  return result; // Vcc in millivolts
-}
-
-void sleep() {
-  PCMSK |= _BV(PCINT0);                   // Use PB0 as interrupt pin
-  adc_disable();
-  
-  sleep_enable();                         // Sets the Sleep Enable bit in the MCUCR Register (SE BIT)
-  sei();                                  // Enable interrupts
-
-  sleep_cpu();                            // sleep
-  
-  cli();                                  // Disable interrupts
-  PCMSK &= ~_BV(PCINT0);                  // Turn off PB0 as interrupt pin
-  sleep_disable();                        // Clear SE bit
-  adc_enable();
-  
-  sei();                                  // Enable interrupts
-}
-
-ISR(PCINT0_vect) {
-  sendWindowState();
-}
-
-ISR(WDT_vect) {
-  counter++;
-  if (counter % 38 == 0) {
-    sendWindowState();
-    counter = 0;
-  }
-}
-
-//enable the wdt for 8sec interrupt
-void enableWdt()
-{
-    MCUSR = 0x00;
-    WDTCR |= _BV(WDCE) | _BV(WDE);
-    WDTCR = _BV(WDIE) | _BV(WDP3) | _BV(WDP0);    //8192ms
-}
-