short press-on, long press-off

lamp_switch/lamp_switch.ino

@@ -1,8 +1,18 @@
-#include <RCSwitch.h>
 #include <avr/sleep.h>
 #include <avr/power.h>
 #include <avr/wdt.h>
 
+#define DEBUG 0
+#define RC_SWITCH 1
+
+#if RC_SWITCH
+#include <RCSwitch.h>
+#endif
+
+#if DEBUG
+#include <SoftwareSerial_Tiny.h>
+#endif
+
 // Utility macros
 #define adc_disable() (ADCSRA &= ~_BV(ADEN)) // disable ADC (before power-off)
 #define adc_enable()  (ADCSRA |= _BV(ADEN)) // re-enable ADC
@@ -10,38 +20,82 @@
 
 // Pins
 #define SWITCH 0
+
+#if DEBUG
+#define RxD 0
+#define TxD 1
+SoftwareSerial AttinySerial(RxD,TxD);
+#endif
+
+#if RC_SWITCH
 #define SENDER 2
-
 RCSwitch mySwitch = RCSwitch();
+#endif
 
+void sleep();
+void enableWdt();
+void disableWdt();
+void debug(const char* msg);
+
+char* group = "11111";
+int number = 4;
 bool stateOn = false;
+bool timerTriggered = false;
 
 void setup() {
     
+#if DEBUG
+  AttinySerial.begin(9600);
+#endif
+  
+#if RC_SWITCH
   pinMode(SWITCH, INPUT_PULLUP);
-
   mySwitch.enableTransmit(SENDER);
   mySwitch.setProtocol(1);
+#endif
 
   set_sleep_mode(SLEEP_MODE_PWR_DOWN);
   enable_pin_interrupts();
-
 }
 
 void loop() {
   sleep();
 }
 
-void sendCommand() {
+void sendCommand(boolean on) {
+  if (on) {
+#if RC_SWITCH
+    mySwitch.switchOn((char*)"11111", 4);
+#endif
+    debug("switch on");
+  } else {
+#if RC_SWITCH
+    mySwitch.switchOff((char*)"11111", 4);
+#endif
+    debug("switch off");
+  }
+}
+
+ISR(PCINT0_vect) {
   byte state = digitalRead(SWITCH);
   if (state == LOW) {
-    if (stateOn) {
-      mySwitch.switchOff((char*)"11111", 4);
-    } else {
-      mySwitch.switchOn((char*)"11111", 4);
+    debug("state is low");
+    enableWdt();
+  } else {
+    debug("state is high");
+    disableWdt();
+    if (!timerTriggered) {
+      sendCommand(true);
     }
-    stateOn = !stateOn;
   }
+  timerTriggered = false;
+}
+
+ISR(WDT_vect) {
+  debug("wdt");
+  sendCommand(false);
+  timerTriggered = true;
+  disableWdt();
 }
 
 void sleep() {
@@ -61,7 +115,27 @@ void sleep() {
   sei();                                  // Enable interrupts
 }
 
-ISR(PCINT0_vect) {
-  sendCommand();
+//enable the wdt for 1 sec interrupt
+void enableWdt() {
+    cli();
+    MCUSR = 0x00;
+    WDTCR |= _BV(WDCE) | _BV(WDE);
+    WDTCR = _BV(WDIE) | _BV(WDP2) | _BV(WDP1);
+    sei();
+}
+
+void disableWdt() {
+    cli();
+    wdt_reset();
+    MCUSR = 0x00;
+    WDTCR |= _BV(WDCE) | _BV(WDE);
+    WDTCR = 0x00;
+    sei();
+}
+
+void debug(const char* msg) {
+#if DEBUG
+  AttinySerial.println(msg);
+#endif
 }