add existing fritzing documentation for window1, window2 and fridge

window1/README.md

@@ -0,0 +1,8 @@
+# Window1
+Sensor for mezzanine window
+
+## Schema
+![](./wiki/schema.png)
+
+## Breadboard
+![](./wiki/breadboard.png)

window1/window1.ino

@@ -1,16 +1,24 @@
-#include <TinyPower.h>
-#include <Tiny.h>
+#include <RCSwitch.h>
+#include <avr/sleep.h>
+#include <avr/power.h>
+#include <avr/wdt.h>
+
+// Utility macros
+#define adc_disable() (ADCSRA &= ~_BV(ADEN)) // disable ADC (before power-off)
+#define adc_enable()  (ADCSRA |= _BV(ADEN)) // re-enable ADC
+#define enable_pin_interrupts()  (GIMSK |= _BV(PCIE))  // Enable Pin Change Interrupts
 
 // Pins
 #define SWITCH 0
 #define SENDER 2
 #define CONTROLLER 4
 
-ContactSensor sensor = ContactSensor(WINDOW1, SENDER);
+RCSwitch mySwitch = RCSwitch();
+char* WND_OPEN  =  "00000000000000000000000001000001";
+char* WND_CLOSED = "00000000000000000000000001100001";
 
-volatile int counter = 0;
-volatile bool shouldSend = true;
-bool currentState = false;
+int counter = 0;
+bool currentState;
 
 void setup() {
     
@@ -18,38 +26,75 @@ void setup() {
   pinMode(CONTROLLER, OUTPUT);
   digitalWrite(CONTROLLER, LOW);
 
-  sensor.setup();
+  mySwitch.enableTransmit(SENDER);
+  mySwitch.setProtocol(2);
+
+  updateState();
+  sendWindowState();
+
+  set_sleep_mode(SLEEP_MODE_PWR_DOWN);
+  enable_pin_interrupts();
+  enableWdt();
 
-  TinyPower::setup();
-  TinyPower::enableWdt(WDTO_8S);
 }
 
 void loop() {
-  if (shouldSend) {
-	  shouldSend = false;
-	  currentState = digitalRead(SWITCH);
-	  sensor.sendState(currentState);
+  sleep();
+}
+
+void updateState() {
+  currentState = digitalRead(SWITCH);
+}
+
+void sendWindowState() {
+  byte state = digitalRead(SWITCH);
+  if (state == HIGH) {
+    mySwitch.send(WND_OPEN);
+  } else {
+    mySwitch.send(WND_CLOSED);
   }
-  TinyPower::sleep();
+}
+
+void sleep() {
+  PCMSK |= _BV(PCINT0);                   // Use PB0 as interrupt pin
+  adc_disable();
+  
+  sleep_enable();                         // Sets the Sleep Enable bit in the MCUCR Register (SE BIT)
+  sei();                                  // Enable interrupts
+
+  sleep_cpu();                            // sleep
+  
+  cli();                                  // Disable interrupts
+  PCMSK &= ~_BV(PCINT0);                  // Turn off PB0 as interrupt pin
+  sleep_disable();                        // Clear SE bit
+  adc_enable();
+  
+  sei();                                  // Enable interrupts
 }
 
 ISR(PCINT0_vect) {
-  shouldSend = true;
-  wdt_reset();
-  counter = 0;
-  TinyPower::enableWdt(WDTO_8S);
+  sendWindowState();
 }
 
 ISR(WDT_vect) {
+  bool state = digitalRead(SWITCH);
+  if (state != currentState) {
+    sendWindowState();
+    updateState();
+    return;
+  }
   counter++;
-  if (counter == 1) {
-	  shouldSend = true;
-	  return;
-  }
-  if (counter % 75 == 0) {
-	  shouldSend = true;
-  }
-  if (!currentState && counter >= 225) {
-	  TinyPower::disableWdt();
+  if (counter % 76 == 0) {
+    sendWindowState();
+    counter = 0;
   }
 }
+
+//enable the wdt for 8sec interrupt
+void enableWdt()
+{
+    MCUSR = 0x00;
+    WDTCR |= _BV(WDCE) | _BV(WDE);
+    WDTCR = _BV(WDIE) | _BV(WDP3) | _BV(WDP0);    //8192ms
+}
+

window2/README.md

@@ -0,0 +1,8 @@
+# Window2
+Sensor for kids room window
+
+## Schema
+![](./wiki/schema.png)
+
+## Breadboard
+![](./wiki/breadboard.png)