re-organize:

- move code for all devices in dedicated folder
- move code for gateway in the root folder

.gitignore

@@ -1,2 +1,3 @@
 .pio/
 .vscode/
+credentials.h

README.md

@@ -1,10 +1,183 @@
-# Gateway & sensors
+# A gateway for 433 MHz devices
+It uses [rc_switch](https://github.com/sui77/rc-switch) library for controlling wall sockets.
 
-## Branches
-Each sensor has a dedicated branch. E.g.:
-* temp_sensor
-* oil_sensor
+It supports receiving:
+- serial commands for controlling wall switches - all protocols
+- RC commands from wall switches remotes - protocols 1 and 2
+- sensors states over `Protocol 2`
 
-The gateway uses `master` as the main branch. Other sensors' branches get merged once they are ready for production.
+It acts as a serial gateway, communicating in JSON format, and it is connected to a Raspberry Pi running Home Assistant.
 
-## Release flow
+It uses an Arduino Pro Mini 5v 16 Mhz.
+The original bootloader has been replaced with Optiboot using this tutorial: https://andreasrohner.at/posts/Electronics/How-to-make-the-Watchdog-Timer-work-on-an-Arduino-Pro-Mini-by-replacing-the-bootloader/
+
+## Receive RC
+### Sensors
+Sensors transmit state using `Protocol 2` and the gateway translates them into JSON over serial.
+##### Protocol structure
+```
+   STATE
+     |
+1010|1|101010101|1010101010101|10101
+----|-----------|-------------|-----
+TYPE|    VALUE  |     VCC     |  ID
+```
+##### Sensors types
+```C++
+enum SensorType : unsigned short {
+	GENERIC = 4,
+	HUMIDITY = 5,
+	TEMPERATURE = 6,
+	CONTACT = 7
+};
+```
+##### Sensors IDs
+```C++
+enum SensorId : unsigned short {
+	WINDOW1 = 1,
+	WINDOW2 = 2,
+	WATER_SENSOR = 3,
+	TEMP_SENSOR = 4,
+	LIGHT_SENSOR = 5,
+	MOVEMENT_SENSOR = 6,
+	OIL_SENSOR = 7
+};
+```
+#### Stairs temperature
+##### Value and voltage
+```json
+{
+  "sensor": {
+    "id": 4,
+    "diagnostic": {
+      "voltage": 2.239
+    },
+    "temperature": 16.2
+  }
+}
+```
+##### Value only
+```json
+{
+  "sensor": {
+    "id": 4,
+    "temperature": 16.2
+  }
+}
+```
+#### Oil sensor
+##### Value and voltage
+```json
+{
+  "sensor": {
+    "id": 7,
+    "diagnostic": {
+      "voltage": 4.282
+    },
+    "value": 13
+  }
+}
+```
+### Switches
+Gateway receives remote commands over RC Switch and translates them into JSON over serial
+#### Protocol 1
+##### on
+```json
+{
+  "rcSwitch": {
+    "protocol": 1,
+    "state": true,
+    "group": "1",
+    "channel": 1,
+    "raw_value": 5571921
+  }
+}
+```
+##### off
+```json
+{
+  "rcSwitch": {
+    "protocol": 1,
+    "state": false,
+    "group": "1",
+    "channel": 1,
+    "raw_value": 5571921
+  }
+}
+```
+
+#### Protocol 2
+```json
+{
+  "rcSwitch": {
+    "protocol": 2,
+    "value": 2650807673
+  }
+}
+```
+
+#### Other protocols
+```json
+{
+  "rcSwitch": {
+    "protocol": 4,
+    "value": 1234567890
+  }
+}
+```
+### DHT
+Reads local DHT11 sensor and outputs JSON over serial
+```
+{
+  "dht11": {
+    "temperature": 31.9,
+    "humidity": 45
+  }
+}
+```
+---
+## Receive commands
+It receives commands over serial, in JSON format, and executes them.
+#### Protocol 1
+##### on
+```json
+{
+  "rcSwitch": {
+    "protocol": 1,
+    "group": "00001",
+    "channel": 1,
+    "state": true
+  }
+}
+```
+##### off
+```json
+{
+  "rcSwitch": {
+    "protocol": 1,
+    "group": "00001",
+    "channel": 1,
+    "state": false
+  }
+}
+```
+
+#### Protocol 2
+```json
+{
+  "rcSwitch": {
+    "protocol": 2,
+    "value": "10010110000000000001110101111001"
+  }
+}
+```
+
+#### Other protocols
+```json
+{
+  "rcSwitch": {
+    "protocol": 4,
+    "value": "010001101001100101110100"
+  }
+}
+```

devices/README.md

@@ -0,0 +1,10 @@
+# Gateway & sensors
+
+## Branches
+Each sensor has a dedicated branch. E.g.:
+* temp_sensor
+* oil_sensor
+
+The gateway uses `master` as the main branch. Other sensors' branches get merged once they are ready for production.
+
+## Release flow

devices/oil_sensor/platformio.ini

@@ -14,7 +14,7 @@ board = attiny85
 framework = arduino
 build_src_filter = +<switch.cpp>
 lib_extra_dirs = 
-	../libraries
+	../../libraries
 upload_protocol = stk500v1
 upload_flags = 
 	-P$UPLOAD_PORT
@@ -31,4 +31,4 @@ lib_deps =
 	teckel12/NewPing@^1.9.4
 	sui77/rc-switch @ ^2.6.4
 lib_extra_dirs = 
-	../libraries
+	../../libraries

devices/temp_sensor/platformio.ini

@@ -17,7 +17,7 @@ lib_deps =
     adafruit/DHT sensor library@^1.4.3
 	sui77/rc-switch @ ^2.6.4
 lib_extra_dirs = 
-	../libraries
+	../../libraries
 build_flags = -D DHT_SENSOR=0
 upload_protocol = stk500v1
 upload_flags = 

gateway/.gitignore

@@ -1 +0,0 @@
-include/credentials.h

gateway/README.md

@@ -1,183 +0,0 @@
-# A gateway for 433 MHz devices
-It uses [rc_switch](https://github.com/sui77/rc-switch) library for controlling wall sockets.
-
-It supports receiving:
-- serial commands for controlling wall switches - all protocols
-- RC commands from wall switches remotes - protocols 1 and 2
-- sensors states over `Protocol 2`
-
-It acts as a serial gateway, communicating in JSON format, and it is connected to a Raspberry Pi running Home Assistant.
-
-It uses an Arduino Pro Mini 5v 16 Mhz.
-The original bootloader has been replaced with Optiboot using this tutorial: https://andreasrohner.at/posts/Electronics/How-to-make-the-Watchdog-Timer-work-on-an-Arduino-Pro-Mini-by-replacing-the-bootloader/
-
-## Receive RC
-### Sensors
-Sensors transmit state using `Protocol 2` and the gateway translates them into JSON over serial.
-##### Protocol structure
-```
-   STATE
-     |
-1010|1|101010101|1010101010101|10101
-----|-----------|-------------|-----
-TYPE|    VALUE  |     VCC     |  ID
-```
-##### Sensors types
-```C++
-enum SensorType : unsigned short {
-	GENERIC = 4,
-	HUMIDITY = 5,
-	TEMPERATURE = 6,
-	CONTACT = 7
-};
-```
-##### Sensors IDs
-```C++
-enum SensorId : unsigned short {
-	WINDOW1 = 1,
-	WINDOW2 = 2,
-	WATER_SENSOR = 3,
-	TEMP_SENSOR = 4,
-	LIGHT_SENSOR = 5,
-	MOVEMENT_SENSOR = 6,
-	OIL_SENSOR = 7
-};
-```
-#### Stairs temperature
-##### Value and voltage
-```json
-{
-  "sensor": {
-    "id": 4,
-    "diagnostic": {
-      "voltage": 2.239
-    },
-    "temperature": 16.2
-  }
-}
-```
-##### Value only
-```json
-{
-  "sensor": {
-    "id": 4,
-    "temperature": 16.2
-  }
-}
-```
-#### Oil sensor
-##### Value and voltage
-```json
-{
-  "sensor": {
-    "id": 7,
-    "diagnostic": {
-      "voltage": 4.282
-    },
-    "value": 13
-  }
-}
-```
-### Switches
-Gateway receives remote commands over RC Switch and translates them into JSON over serial
-#### Protocol 1
-##### on
-```json
-{
-  "rcSwitch": {
-    "protocol": 1,
-    "state": true,
-    "group": "1",
-    "channel": 1,
-    "raw_value": 5571921
-  }
-}
-```
-##### off
-```json
-{
-  "rcSwitch": {
-    "protocol": 1,
-    "state": false,
-    "group": "1",
-    "channel": 1,
-    "raw_value": 5571921
-  }
-}
-```
-
-#### Protocol 2
-```json
-{
-  "rcSwitch": {
-    "protocol": 2,
-    "value": 2650807673
-  }
-}
-```
-
-#### Other protocols
-```json
-{
-  "rcSwitch": {
-    "protocol": 4,
-    "value": 1234567890
-  }
-}
-```
-### DHT
-Reads local DHT11 sensor and outputs JSON over serial
-```
-{
-  "dht11": {
-    "temperature": 31.9,
-    "humidity": 45
-  }
-}
-```
----
-## Receive commands
-It receives commands over serial, in JSON format, and executes them.
-#### Protocol 1
-##### on
-```json
-{
-  "rcSwitch": {
-    "protocol": 1,
-    "group": "00001",
-    "channel": 1,
-    "state": true
-  }
-}
-```
-##### off
-```json
-{
-  "rcSwitch": {
-    "protocol": 1,
-    "group": "00001",
-    "channel": 1,
-    "state": false
-  }
-}
-```
-
-#### Protocol 2
-```json
-{
-  "rcSwitch": {
-    "protocol": 2,
-    "value": "10010110000000000001110101111001"
-  }
-}
-```
-
-#### Other protocols
-```json
-{
-  "rcSwitch": {
-    "protocol": 4,
-    "value": "010001101001100101110100"
-  }
-}
-```

platformio.ini

@@ -13,7 +13,7 @@ default_envs = huzzah
 
 [env]
 lib_extra_dirs =
-    ../libraries
+    ./libraries
 lib_deps = 
 	sui77/rc-switch@^2.6.4
 	bblanchon/ArduinoJson@6.21.5

rc-gateway.code-workspace

@@ -1,22 +1,17 @@
 {
 	"folders": [
 		{
-			"path": "gateway"
+			"path": "."
 		},
 		{
-			"name": "temp_sensor",
-			"path": "temp_sensor"
+			"path": "devices/temp_sensor"
 		},
 		{
-			"path": "libraries"
-		},
-		{
-			"path": "oil_sensor"
+			"path": "devices/oil_sensor"
 		}
 	],
 	"settings": {
 		"files.associations": {
-			"*.yaml": "esphome",
 			"functional": "cpp",
 			"queue": "cpp",
 			"array": "cpp",