#include "Arduino.h"
#include <Tiny.h>

// Pins
#define SENDER 2
#define TEMP_PIN 3

#define SENSOR_ID 4

TempSensor sensor = TempSensor(SENSOR_ID, SENDER);

int counter = 0;

void setup() {

	Serial.begin(9600);

	sensor.setup();

//  TinyPower::setup();
//  TinyPower::enableWdt(WDTO_8S);
}

void loop() {
//  TinyPower::sleep();
	unsigned long value = sensor.sendTempAndVoltage(readTemp());
	Serial.println(value);
	delay(5000);
}

int readTemp() {
	int reading = analogRead(TEMP_PIN);

	// converting that reading to voltage, for 3.3v arduino use 3.3
	float voltage = reading * 5.0;
	voltage /= 1024.0;

	// print out the voltage
	Serial.print(voltage);
	Serial.println(" volts");

	// now print out the temperature
	float temperatureC = (voltage - 0.5) * 100; //converting from 10 mv per degree wit 500 mV offset
												//to degrees ((voltage - 500mV) times 100)
	Serial.print(temperatureC);
	Serial.println(" degrees C");
	return roundf(temperatureC*10);
}

ISR(PCINT0_vect) {
	sensor.sendTempAndVoltage(readTemp());
	delay(5000);
	sensor.sendTempAndVoltage(readTemp());
}

ISR(WDT_vect) {
	counter++;
	if (counter % 220 == 0) {
		counter = 0;
		sensor.sendTempAndVoltage(readTemp());
	}
}