arduino/rc-gateway
1
0
Fork 0
Code Issues Pull Requests Actions Projects Releases Wiki Activity

remove old window copy

Browse Source
This commit is contained in:
Nicu Hodos 2018-07-17 00:14:39 +02:00
parent 2508d2cf5e
commit 3d7e0e3ec6
1 changed files with 0 additions and 119 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

119
window1_copy/window1_copy.ino
View File

@ -1,119 +0,0 @@
#include <RCSwitch.h>
#include <avr/sleep.h>
#include <avr/power.h>
#include <avr/wdt.h>
#include <SystemStatus.h>
// Utility macros
#define adc_disable() (ADCSRA &= ~_BV(ADEN)) // disable ADC (before power-off)
#define adc_enable() (ADCSRA |= _BV(ADEN)) // re-enable ADC
#define enable_pin_interrupts() (GIMSK |= _BV(PCIE)) // Enable Pin Change Interrupts
// Pins
#define SWITCH 0
#define SENDER 2
#define CONTROLLER 4
RCSwitch mySwitch = RCSwitch();
char* WND_OPEN = "00000000000000000000000001000001";
char* WND_CLOSED = "00000000000000000000000001100001";
int counter = 0;
//SystemStatus sys = SystemStatus();
void setup() {
pinMode(SWITCH, INPUT_PULLUP);
pinMode(CONTROLLER, OUTPUT);
digitalWrite(CONTROLLER, LOW);
mySwitch.enableTransmit(SENDER);
mySwitch.setProtocol(2);
set_sleep_mode(SLEEP_MODE_PWR_DOWN);
enable_pin_interrupts();
enableWdt();
// mySwitch.send(26, 32);
}
void loop() {
sleep();
}
void sendWindowState() {
byte state = digitalRead(SWITCH);
if (state == HIGH) {
mySwitch.send(WND_OPEN);
} else {
mySwitch.send(WND_CLOSED);
}
}
void sendBatteryStatus() {
// mySwitch.send(sys.getVCC(), 32);
}
long readVcc() {
// Read 1.1V reference against AVcc
// set the reference to Vcc and the measurement to the internal 1.1V reference
#if defined(__AVR_ATmega32U4__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
ADMUX = _BV(REFS0) | _BV(MUX4) | _BV(MUX3) | _BV(MUX2) | _BV(MUX1);
#elif defined (__AVR_ATtiny24__) || defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__)
ADMUX = _BV(MUX5) | _BV(MUX0);
#elif defined (__AVR_ATtiny25__) || defined(__AVR_ATtiny45__) || defined(__AVR_ATtiny85__)
ADMUX = _BV(MUX3) | _BV(MUX2);
#else
ADMUX = _BV(REFS0) | _BV(MUX3) | _BV(MUX2) | _BV(MUX1);
#endif
delay(2); // Wait for Vref to settle
ADCSRA |= _BV(ADSC); // Start conversion
while (bit_is_set(ADCSRA,ADSC)); // measuring
uint8_t low = ADCL; // must read ADCL first - it then locks ADCH
uint8_t high = ADCH; // unlocks both
long result = (high<<8) | low;
result = 1125300L / result; // Calculate Vcc (in mV); 1125300 = 1.1*1023*1000
return result; // Vcc in millivolts
}
void sleep() {
PCMSK |= _BV(PCINT0); // Use PB0 as interrupt pin
adc_disable();
sleep_enable(); // Sets the Sleep Enable bit in the MCUCR Register (SE BIT)
sei(); // Enable interrupts
sleep_cpu(); // sleep
cli(); // Disable interrupts
PCMSK &= ~_BV(PCINT0); // Turn off PB0 as interrupt pin
sleep_disable(); // Clear SE bit
adc_enable();
sei(); // Enable interrupts
}
ISR(PCINT0_vect) {
sendWindowState();
}
ISR(WDT_vect) {
counter++;
if (counter % 38 == 0) {
sendWindowState();
counter = 0;
}
}
//enable the wdt for 8sec interrupt
void enableWdt()
{
MCUSR = 0x00;
WDTCR |= _BV(WDCE) | _BV(WDE);
WDTCR = _BV(WDIE) | _BV(WDP3) | _BV(WDP0); //8192ms
}