update mode of operation documentation for oil sensor

defined at compile time

.drone.yml

@@ -0,0 +1,46 @@
+---
+kind: pipeline
+type: exec
+name: gateway pipeline
+
+platform:
+  os: linux
+  arch: arm
+
+steps:
+- name: static check
+  commands:
+  - cd gateway
+  - pio check -e pro-mini
+  when:
+    target:
+      exclude:
+      - production
+
+- name: native tests
+  commands:
+  - cd gateway
+  - pio test -e native
+  when:
+    target:
+      exclude:
+      - production
+
+- name: upload firmware
+  commands:
+  - cd gateway
+  - service ser2net stop
+  - pio run -e pro-mini
+  - echo 'reset' > /dev/ttyUSB0; sleep 1s; avrdude -patmega328p -carduino -P/dev/ttyUSB0 -b115200 -D -Uflash:w:.pio/build/pro-mini/firmware.hex:i -v
+  - service ser2net start
+  when:
+    target:
+    - production
+
+trigger:
+  branch:
+  - gateway
+  - gw/*
+
+node:
+  host: homebox

.gitattributes

@@ -0,0 +1,2 @@
+*.png filter=lfs diff=lfs merge=lfs -text
+*.fzz filter=lfs diff=lfs merge=lfs -text

.gitignore

@@ -1,8 +1,3 @@
-.metadata/
-.settings
-.project
-.cproject
-.ino*
-Release/
-Prototype/
-.*/
+.pio/
+.vscode/
+credentials.h

LICENSE

@@ -0,0 +1,674 @@
+                    GNU GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+                            Preamble
+
+  The GNU General Public License is a free, copyleft license for
+software and other kinds of works.
+
+  The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works.  By contrast,
+the GNU General Public License is intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users.  We, the Free Software Foundation, use the
+GNU General Public License for most of our software; it applies also to
+any other work released this way by its authors.  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
+
+  To protect your rights, we need to prevent others from denying you
+these rights or asking you to surrender the rights.  Therefore, you have
+certain responsibilities if you distribute copies of the software, or if
+you modify it: responsibilities to respect the freedom of others.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must pass on to the recipients the same
+freedoms that you received.  You must make sure that they, too, receive
+or can get the source code.  And you must show them these terms so they
+know their rights.
+
+  Developers that use the GNU GPL protect your rights with two steps:
+(1) assert copyright on the software, and (2) offer you this License
+giving you legal permission to copy, distribute and/or modify it.
+
+  For the developers' and authors' protection, the GPL clearly explains
+that there is no warranty for this free software.  For both users' and
+authors' sake, the GPL requires that modified versions be marked as
+changed, so that their problems will not be attributed erroneously to
+authors of previous versions.
+
+  Some devices are designed to deny users access to install or run
+modified versions of the software inside them, although the manufacturer
+can do so.  This is fundamentally incompatible with the aim of
+protecting users' freedom to change the software.  The systematic
+pattern of such abuse occurs in the area of products for individuals to
+use, which is precisely where it is most unacceptable.  Therefore, we
+have designed this version of the GPL to prohibit the practice for those
+products.  If such problems arise substantially in other domains, we
+stand ready to extend this provision to those domains in future versions
+of the GPL, as needed to protect the freedom of users.
+
+  Finally, every program is threatened constantly by software patents.
+States should not allow patents to restrict development and use of
+software on general-purpose computers, but in those that do, we wish to
+avoid the special danger that patents applied to a free program could
+make it effectively proprietary.  To prevent this, the GPL assures that
+patents cannot be used to render the program non-free.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                       TERMS AND CONDITIONS
+
+  0. Definitions.
+
+  "This License" refers to version 3 of the GNU General Public License.
+
+  "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
+
+  "The Program" refers to any copyrightable work licensed under this
+License.  Each licensee is addressed as "you".  "Licensees" and
+"recipients" may be individuals or organizations.
+
+  To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy.  The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
+
+  A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+  To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy.  Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+  To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies.  Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
+
+  An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License.  If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+  1. Source Code.
+
+  The "source code" for a work means the preferred form of the work
+for making modifications to it.  "Object code" means any non-source
+form of a work.
+
+  A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+  The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form.  A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+  The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities.  However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work.  For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+  The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
+
+  The Corresponding Source for a work in source code form is that
+same work.
+
+  2. Basic Permissions.
+
+  All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met.  This License explicitly affirms your unlimited
+permission to run the unmodified Program.  The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work.  This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+  You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force.  You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright.  Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
+
+  Conveying under any other circumstances is permitted solely under
+the conditions stated below.  Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+  No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+  When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+  4. Conveying Verbatim Copies.
+
+  You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+  You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+  5. Conveying Modified Source Versions.
+
+  You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+    a) The work must carry prominent notices stating that you modified
+    it, and giving a relevant date.
+
+    b) The work must carry prominent notices stating that it is
+    released under this License and any conditions added under section
+    7.  This requirement modifies the requirement in section 4 to
+    "keep intact all notices".
+
+    c) You must license the entire work, as a whole, under this
+    License to anyone who comes into possession of a copy.  This
+    License will therefore apply, along with any applicable section 7
+    additional terms, to the whole of the work, and all its parts,
+    regardless of how they are packaged.  This License gives no
+    permission to license the work in any other way, but it does not
+    invalidate such permission if you have separately received it.
+
+    d) If the work has interactive user interfaces, each must display
+    Appropriate Legal Notices; however, if the Program has interactive
+    interfaces that do not display Appropriate Legal Notices, your
+    work need not make them do so.
+
+  A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit.  Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+  6. Conveying Non-Source Forms.
+
+  You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+    a) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by the
+    Corresponding Source fixed on a durable physical medium
+    customarily used for software interchange.
+
+    b) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by a
+    written offer, valid for at least three years and valid for as
+    long as you offer spare parts or customer support for that product
+    model, to give anyone who possesses the object code either (1) a
+    copy of the Corresponding Source for all the software in the
+    product that is covered by this License, on a durable physical
+    medium customarily used for software interchange, for a price no
+    more than your reasonable cost of physically performing this
+    conveying of source, or (2) access to copy the
+    Corresponding Source from a network server at no charge.
+
+    c) Convey individual copies of the object code with a copy of the
+    written offer to provide the Corresponding Source.  This
+    alternative is allowed only occasionally and noncommercially, and
+    only if you received the object code with such an offer, in accord
+    with subsection 6b.
+
+    d) Convey the object code by offering access from a designated
+    place (gratis or for a charge), and offer equivalent access to the
+    Corresponding Source in the same way through the same place at no
+    further charge.  You need not require recipients to copy the
+    Corresponding Source along with the object code.  If the place to
+    copy the object code is a network server, the Corresponding Source
+    may be on a different server (operated by you or a third party)
+    that supports equivalent copying facilities, provided you maintain
+    clear directions next to the object code saying where to find the
+    Corresponding Source.  Regardless of what server hosts the
+    Corresponding Source, you remain obligated to ensure that it is
+    available for as long as needed to satisfy these requirements.
+
+    e) Convey the object code using peer-to-peer transmission, provided
+    you inform other peers where the object code and Corresponding
+    Source of the work are being offered to the general public at no
+    charge under subsection 6d.
+
+  A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+  A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling.  In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage.  For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product.  A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+  "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source.  The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+  If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information.  But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+  The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed.  Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+  Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+  7. Additional Terms.
+
+  "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law.  If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+  When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it.  (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.)  You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+  Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+    a) Disclaiming warranty or limiting liability differently from the
+    terms of sections 15 and 16 of this License; or
+
+    b) Requiring preservation of specified reasonable legal notices or
+    author attributions in that material or in the Appropriate Legal
+    Notices displayed by works containing it; or
+
+    c) Prohibiting misrepresentation of the origin of that material, or
+    requiring that modified versions of such material be marked in
+    reasonable ways as different from the original version; or
+
+    d) Limiting the use for publicity purposes of names of licensors or
+    authors of the material; or
+
+    e) Declining to grant rights under trademark law for use of some
+    trade names, trademarks, or service marks; or
+
+    f) Requiring indemnification of licensors and authors of that
+    material by anyone who conveys the material (or modified versions of
+    it) with contractual assumptions of liability to the recipient, for
+    any liability that these contractual assumptions directly impose on
+    those licensors and authors.
+
+  All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10.  If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term.  If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+  If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+  Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+  8. Termination.
+
+  You may not propagate or modify a covered work except as expressly
+provided under this License.  Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+  However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+  Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+  Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+  9. Acceptance Not Required for Having Copies.
+
+  You are not required to accept this License in order to receive or
+run a copy of the Program.  Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance.  However,
+nothing other than this License grants you permission to propagate or
+modify any covered work.  These actions infringe copyright if you do
+not accept this License.  Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+  10. Automatic Licensing of Downstream Recipients.
+
+  Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License.  You are not responsible
+for enforcing compliance by third parties with this License.
+
+  An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations.  If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+  You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License.  For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+  11. Patents.
+
+  A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based.  The
+work thus licensed is called the contributor's "contributor version".
+
+  A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version.  For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+  Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+  In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement).  To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+  If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients.  "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+  If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+  A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License.  You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+  Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+  12. No Surrender of Others' Freedom.
+
+  If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all.  For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
+
+  13. Use with the GNU Affero General Public License.
+
+  Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU Affero General Public License into a single
+combined work, and to convey the resulting work.  The terms of this
+License will continue to apply to the part which is the covered work,
+but the special requirements of the GNU Affero General Public License,
+section 13, concerning interaction through a network will apply to the
+combination as such.
+
+  14. Revised Versions of this License.
+
+  The Free Software Foundation may publish revised and/or new versions of
+the GNU General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+  Each version is given a distinguishing version number.  If the
+Program specifies that a certain numbered version of the GNU General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation.  If the Program does not specify a version number of the
+GNU General Public License, you may choose any version ever published
+by the Free Software Foundation.
+
+  If the Program specifies that a proxy can decide which future
+versions of the GNU General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
+
+  Later license versions may give you additional or different
+permissions.  However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+  15. Disclaimer of Warranty.
+
+  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. Limitation of Liability.
+
+  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+  17. Interpretation of Sections 15 and 16.
+
+  If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+                     END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+state the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) 2025  Nicolae Hodos
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+Also add information on how to contact you by electronic and paper mail.
+
+  If the program does terminal interaction, make it output a short
+notice like this when it starts in an interactive mode:
+
+    <program>  Copyright (C) 2025  Nicolae Hodos
+    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, your program's commands
+might be different; for a GUI interface, you would use an "about box".
+
+  You should also get your employer (if you work as a programmer) or school,
+if any, to sign a "copyright disclaimer" for the program, if necessary.
+For more information on this, and how to apply and follow the GNU GPL, see
+<https://www.gnu.org/licenses/>.
+
+  The GNU General Public License does not permit incorporating your program
+into proprietary programs.  If your program is a subroutine library, you
+may consider it more useful to permit linking proprietary applications with
+the library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.  But first, please read
+<https://www.gnu.org/licenses/why-not-lgpl.html>.

README.md

@@ -0,0 +1,225 @@
+# A gateway for 433 MHz devices
+It uses [rc_switch](https://github.com/sui77/rc-switch) library for controlling wall sockets and receiving data from sensors. The library supports multiple protocols, the ones used by this gateway are:
+- Protocol 1, 2, 4, and 5 for wall switches
+- Protocol 2 for sensors
+- It can be extended to support more protocols
+
+It works with 2 possible hardwares: Arduino Pro Mini and ESP8266 (currently in use). The code specific to each microcontroller is activated using `#define` directive:
+``` C
+#if defined(ESP8266)
+#include "huzzah.h"
+#else
+#include "pro-mini.h"
+#endif
+
+```
+## Serial communication using Arduino Pro Mini
+It works with an Arduino Pro Mini 5v 16 Mhz, where the original bootloader has been replaced with Optiboot using this tutorial: https://andreasrohner.at/posts/Electronics/How-to-make-the-Watchdog-Timer-work-on-an-Arduino-Pro-Mini-by-replacing-the-bootloader/
+
+It is used as a serial gateway communicating in JSON format, when connected to a Raspberry Pi running Home Assistant.
+
+### Mode of operation:
+- it receives commands in JSON format over serial and translates them into RC commands to be sent to wall switches: ON/OFF
+- it receives sates from sensors, or RC commands from RC remotes, and translates them into JSON, which is written on `Serial` to be consumed by HA
+
+## MQTT communication using ESP8266
+It works with any ESP8266 board, an [Adafruit Huzzah](https://learn.adafruit.com/adafruit-huzzah-esp8266-breakout) in this case.
+
+It is used as a gateway communicating in JSON format with Home Assistant, by publishing and subscribing to topics on MQTT. Devices on Home Assistant side are configured automatically using [MQTT discovery](https://www.home-assistant.io/integrations/mqtt/#configuration-via-mqtt-discovery).
+
+### Mode of operation:
+- it receives commands over MQTT and translates them into RC commands to be sent to wall switches: ON/OFF
+- it receives sates from sensors, or RC commands from RC remotes, translates them into JSON and updates devices in HA by publishing messages on MQTT
+
+## Sensors
+Sensors transmit state using `Protocol 2`, a 32 bit unsigned number.
+#### Protocol structure
+```
+   STATE
+     |
+1010|1|101010101|1010101010101|10101
+----|-----------|-------------|-----
+TYPE|    VALUE  |     VCC     |  ID
+```
+where:
+- **ID**: uniquely identifies a sensor
+- **TYPE**: the type of the sensor, see bellow
+- **VALUE**: used for _GENERIC_, _HUMIDITY_ and _TEMPERATURE_ sensors
+- **STATE**: used for _CONTACT_ sensor only; since it doesn't conflict with other sensor types, it uses one bit from **VALUE**
+- **VCC**: battery voltage, used to detect when batteries need to be replaced
+#### Sensors types
+```C++
+enum SensorType : uint8_t {
+	GENERIC = 4,
+	HUMIDITY = 5,
+	TEMPERATURE = 6,
+	CONTACT = 7
+};
+```
+#### Sensors IDs
+```C++
+enum SensorId : uint8_t {
+	WINDOW1 = 1,
+	WINDOW2 = 2,
+	WATER_SENSOR = 3,
+	TEMP_SENSOR = 4,
+	LIGHT_SENSOR = 5,
+	MOVEMENT_SENSOR = 6,
+	OIL_SENSOR = 7
+};
+```
+### Devices
+#### [Servers room temperature](./devices/temp_sensor/)
+Type: **TEMPERATURE**
+##### Value and voltage
+```json
+{
+  "sensor": {
+    "id": 4,
+    "diagnostic": {
+      "voltage": 2.239
+    },
+    "temperature": 16.2
+  }
+}
+```
+##### Value only
+```json
+{
+  "sensor": {
+    "id": 4,
+    "temperature": 16.2
+  }
+}
+```
+#### [Oil tank sensor](./devices/oil_sensor/)
+Type: **GENERIC**
+##### Value and voltage
+```json
+{
+  "sensor": {
+    "id": 7,
+    "diagnostic": {
+      "voltage": 4.282
+    },
+    "value": 13
+  }
+}
+```
+#### [Presence sensor](./devices/presence_sensor/)
+Type: **CONTACT**
+##### Value and voltage
+```json
+{
+  "sensor": {
+    "id": 8,
+    "diagnostic": {
+      "voltage": 3.28
+    },
+    "value": 1
+  }
+}
+```
+## Switches
+Gateway receives remote commands over RC Switch and translates them into JSON.
+#### Protocol 1
+##### ON
+```json
+{
+  "rcSwitch": {
+    "protocol": 1,
+    "state": true,
+    "group": "1",
+    "channel": 1,
+    "raw_value": 5571921
+  }
+}
+```
+##### OFF
+```json
+{
+  "rcSwitch": {
+    "protocol": 1,
+    "state": false,
+    "group": "1",
+    "channel": 1,
+    "raw_value": 5571921
+  }
+}
+```
+
+#### Protocol 2
+```json
+{
+  "rcSwitch": {
+    "protocol": 2,
+    "value": 2650807673
+  }
+}
+```
+
+#### Other protocols
+```json
+{
+  "rcSwitch": {
+    "protocol": 4,
+    "value": 1234567890
+  }
+}
+```
+### DHT
+Reads local DHT11 sensor and outputs it into JSON.
+```
+{
+  "dht11": {
+    "temperature": 31.9,
+    "humidity": 45
+  }
+}
+```
+---
+## Commands from Home Assistant
+It receives commands in JSON format, over serial or MQTT, and executes them.
+#### Protocol 1
+##### ON
+```json
+{
+  "rcSwitch": {
+    "protocol": 1,
+    "group": "00001",
+    "channel": 1,
+    "state": true
+  }
+}
+```
+##### OFF
+```json
+{
+  "rcSwitch": {
+    "protocol": 1,
+    "group": "00001",
+    "channel": 1,
+    "state": false
+  }
+}
+```
+
+#### Protocol 2
+```json
+{
+  "rcSwitch": {
+    "protocol": 2,
+    "value": "10010110000000000001110101111001"
+  }
+}
+```
+
+#### Other protocols
+```json
+{
+  "rcSwitch": {
+    "protocol": 4,
+    "value": "010001101001100101110100"
+  }
+}
+```

devices/README.md

@@ -0,0 +1,10 @@
+# Gateway & sensors
+
+## Branches
+Each sensor has a dedicated branch. E.g.:
+* temp_sensor
+* oil_sensor
+
+The gateway uses `master` as the main branch. Other sensors' branches get merged once they are ready for production.
+
+## Release flow

devices/movement_sensor/movement_sensor.ino

@@ -0,0 +1,32 @@
+#include <Tiny.h>
+#include <SoftwareSerial_Tiny.h>
+#include <TinyPower.h>
+
+// Pins
+#define MOVEMENT_PIN PCINT2
+#define SENDER 4
+
+ContactSensor sensor = ContactSensor(MOVEMENT_SENSOR, SENDER);
+
+volatile bool shouldSend = false;
+
+void setup() {
+
+	pinMode(MOVEMENT_PIN, INPUT_PULLUP);
+	sensor.setup();
+	TinyPower::setup();
+	PCMSK |= (1 << MOVEMENT_PIN);
+}
+
+void loop() {
+	if (shouldSend) {
+		shouldSend = false;
+		int currentState = digitalRead(MOVEMENT_PIN);
+		sensor.sendState(!currentState);
+	}
+	TinyPower::sleep();
+}
+
+ISR(PCINT0_vect) {
+	shouldSend = true;
+}

devices/oil_sensor/.gitignore

@@ -0,0 +1,5 @@
+.pio
+.vscode/.browse.c_cpp.db*
+.vscode/c_cpp_properties.json
+.vscode/launch.json
+.vscode/ipch

devices/oil_sensor/README.md

@@ -0,0 +1,20 @@
+# Oil sensor
+
+Using an ultra sonic sensor, it detects the amount of oil used for heating.
+
+For optimization purposes, it uses 2 microcontrollers:
+#### **Arduino Pro Mini**
+It offers a precise quartz clock, required by the ultra sonic sensor to accurately determine the level of oil in the tank. But because it has a high consumption, it is not suited for battery powered devices.
+#### **ATTiny85**
+It has an inaccurate quartz clock that cannot be used for the sonar sensor, but it is more than enough to be used as a wake-up device for Arduino Pro Mini. Due to the very low power consumption, it is ideal for battery powered devices.
+
+## Mode of operation
+ATTiny85 is connected directly to the battery and acts as a power switch:
+1. on regular intervals, ~6 hours, it powers on the Arduino Pro Mini
+1. Arduino Pro Mini will:
+    - read the oil tank level
+    - send the information to the RC Gateway
+    - signal the ATTiny85 that it has finished
+1. turns off the Arduino Pro Mini
+
+![Schematics](docs/oil_sensor_bb.png)

devices/oil_sensor/include/README

@@ -0,0 +1,39 @@
+
+This directory is intended for project header files.
+
+A header file is a file containing C declarations and macro definitions
+to be shared between several project source files. You request the use of a
+header file in your project source file (C, C++, etc) located in `src` folder
+by including it, with the C preprocessing directive `#include'.
+
+```src/main.c
+
+#include "header.h"
+
+int main (void)
+{
+ ...
+}
+```
+
+Including a header file produces the same results as copying the header file
+into each source file that needs it. Such copying would be time-consuming
+and error-prone. With a header file, the related declarations appear
+in only one place. If they need to be changed, they can be changed in one
+place, and programs that include the header file will automatically use the
+new version when next recompiled. The header file eliminates the labor of
+finding and changing all the copies as well as the risk that a failure to
+find one copy will result in inconsistencies within a program.
+
+In C, the usual convention is to give header files names that end with `.h'.
+It is most portable to use only letters, digits, dashes, and underscores in
+header file names, and at most one dot.
+
+Read more about using header files in official GCC documentation:
+
+* Include Syntax
+* Include Operation
+* Once-Only Headers
+* Computed Includes
+
+https://gcc.gnu.org/onlinedocs/cpp/Header-Files.html

devices/oil_sensor/include/SonarSensor.h

@@ -0,0 +1,16 @@
+#pragma once
+
+#include "GenericSensor.h"
+#include <NewPing.h>
+
+
+class SonarSensor : public GenericSensor {
+private:
+	NewPing sonar{ TRIGGER_PIN, ECHO_PIN, MAX_DISTANCE };
+public:
+	SonarSensor(short id) : GenericSensor(id) {}
+
+	unsigned int scan() {
+		return sonar.convert_cm(sonar.ping_median());
+	}
+};

devices/oil_sensor/lib/README

@@ -0,0 +1,46 @@
+
+This directory is intended for project specific (private) libraries.
+PlatformIO will compile them to static libraries and link into executable file.
+
+The source code of each library should be placed in a an own separate directory
+("lib/your_library_name/[here are source files]").
+
+For example, see a structure of the following two libraries `Foo` and `Bar`:
+
+|--lib
+|  |
+|  |--Bar
+|  |  |--docs
+|  |  |--examples
+|  |  |--src
+|  |     |- Bar.c
+|  |     |- Bar.h
+|  |  |- library.json (optional, custom build options, etc) https://docs.platformio.org/page/librarymanager/config.html
+|  |
+|  |--Foo
+|  |  |- Foo.c
+|  |  |- Foo.h
+|  |
+|  |- README --> THIS FILE
+|
+|- platformio.ini
+|--src
+   |- main.c
+
+and a contents of `src/main.c`:
+```
+#include <Foo.h>
+#include <Bar.h>
+
+int main (void)
+{
+  ...
+}
+
+```
+
+PlatformIO Library Dependency Finder will find automatically dependent
+libraries scanning project source files.
+
+More information about PlatformIO Library Dependency Finder
+- https://docs.platformio.org/page/librarymanager/ldf.html

devices/oil_sensor/platformio.ini

@@ -0,0 +1,34 @@
+; PlatformIO Project Configuration File
+;
+;   Build options: build flags, source filter
+;   Upload options: custom upload port, speed and extra flags
+;   Library options: dependencies, extra library storages
+;   Advanced options: extra scripting
+;
+; Please visit documentation for the other options and examples
+; https://docs.platformio.org/page/projectconf.html
+
+[env:attiny85]
+platform = atmelavr
+board = attiny85
+framework = arduino
+build_src_filter = +<switch.cpp>
+lib_extra_dirs = 
+	../../lib
+upload_protocol = stk500v1
+upload_flags = 
+	-P$UPLOAD_PORT
+	-b$UPLOAD_SPEED
+upload_port = /dev/ttyACM0
+upload_speed = 19200
+
+[env:pro_mini]
+platform = atmelavr
+board = pro16MHzatmega168
+framework = arduino
+build_src_filter = +<oil_sensor.cpp>
+lib_deps = 
+	teckel12/NewPing@^1.9.4
+	sui77/rc-switch @ ^2.6.4
+lib_extra_dirs = 
+	../../lib

devices/oil_sensor/src/oil_sensor.cpp

@@ -0,0 +1,37 @@
+#include <Arduino.h>
+
+#define SENDER_GND    10
+#define SENDER_DATA   11
+#define SENDER_VCC    12
+#define TRIGGER_PIN   2
+#define ECHO_PIN      3
+#define NOTIFY_PIN    9
+
+#define MAX_DISTANCE  200		// 2 meters
+
+#include "SonarSensor.h"
+
+SonarSensor oilSensor(OIL_SENSOR);
+
+void setup() {
+	Serial.begin(9600);
+	Serial.println("starting...");
+
+	pinMode(SENDER_GND, OUTPUT);
+	digitalWrite(SENDER_GND, LOW);
+	pinMode(SENDER_VCC, OUTPUT);
+	digitalWrite(SENDER_VCC, HIGH);
+	TinySwitch::setup(SENDER_DATA);
+
+	delay(300);
+	unsigned int distance = oilSensor.scan();
+	Serial.println(distance);
+	if (distance) oilSensor.sendValueAndVoltage(distance);
+	delay(200);
+	pinMode(NOTIFY_PIN, OUTPUT);
+	digitalWrite(NOTIFY_PIN, LOW);
+	Serial.println("finished");
+}
+
+void loop() {
+}

devices/oil_sensor/src/switch.cpp

@@ -0,0 +1,41 @@
+#include <Arduino.h>
+#include <TinyPower.h>
+
+#define CONTROLLER_PIN   	PIN_B4
+#define NOTIFICATION_PIN    PIN_B0
+
+#define HOUR_INTERVAL 450							// 450*8s = ~1 hour
+#define WAKE_INTERVAL (HOUR_INTERVAL*12)			// ~12 hours
+
+
+volatile int counter = 0;
+volatile bool wakeUp = true;
+
+void setup() {
+	pinMode(PIN_B3, INPUT);
+	pinMode(CONTROLLER_PIN, OUTPUT);
+	digitalWrite(CONTROLLER_PIN, LOW);
+	pinMode(NOTIFICATION_PIN, INPUT_PULLUP);
+	TinyPower::setup();
+	TinyPower::enableWdt(WDTO_8S);
+}
+
+void loop() {
+	if (wakeUp) {
+		wakeUp = false;
+		digitalWrite(CONTROLLER_PIN, HIGH);
+	}
+	TinyPower::sleep(NOTIFICATION_PIN);
+}
+
+ISR(WDT_vect) {
+	counter++;
+	if ((counter % WAKE_INTERVAL == 0)) {
+		wakeUp = true;
+	}
+}
+
+ISR(PCINT0_vect) {
+	if (!digitalRead(NOTIFICATION_PIN))
+		digitalWrite(CONTROLLER_PIN, LOW);
+}

devices/oil_sensor/test/README

@@ -0,0 +1,11 @@
+
+This directory is intended for PlatformIO Unit Testing and project tests.
+
+Unit Testing is a software testing method by which individual units of
+source code, sets of one or more MCU program modules together with associated
+control data, usage procedures, and operating procedures, are tested to
+determine whether they are fit for use. Unit testing finds problems early
+in the development cycle.
+
+More information about PlatformIO Unit Testing:
+- https://docs.platformio.org/page/plus/unit-testing.html

devices/presence_sensor/.gitignore

@@ -0,0 +1,5 @@
+.pio
+.vscode/.browse.c_cpp.db*
+.vscode/c_cpp_properties.json
+.vscode/launch.json
+.vscode/ipch

devices/presence_sensor/README.md

@@ -0,0 +1,5 @@
+# Presence ticker
+
+It sends state on regular intervals, so that presence of the bearer can be tracked.
+
+![Schematics](docs/presence_sensor_bb.png)

devices/presence_sensor/include/README

@@ -0,0 +1,39 @@
+
+This directory is intended for project header files.
+
+A header file is a file containing C declarations and macro definitions
+to be shared between several project source files. You request the use of a
+header file in your project source file (C, C++, etc) located in `src` folder
+by including it, with the C preprocessing directive `#include'.
+
+```src/main.c
+
+#include "header.h"
+
+int main (void)
+{
+ ...
+}
+```
+
+Including a header file produces the same results as copying the header file
+into each source file that needs it. Such copying would be time-consuming
+and error-prone. With a header file, the related declarations appear
+in only one place. If they need to be changed, they can be changed in one
+place, and programs that include the header file will automatically use the
+new version when next recompiled. The header file eliminates the labor of
+finding and changing all the copies as well as the risk that a failure to
+find one copy will result in inconsistencies within a program.
+
+In C, the usual convention is to give header files names that end with `.h'.
+It is most portable to use only letters, digits, dashes, and underscores in
+header file names, and at most one dot.
+
+Read more about using header files in official GCC documentation:
+
+* Include Syntax
+* Include Operation
+* Once-Only Headers
+* Computed Includes
+
+https://gcc.gnu.org/onlinedocs/cpp/Header-Files.html

devices/presence_sensor/lib/README

@@ -0,0 +1,46 @@
+
+This directory is intended for project specific (private) libraries.
+PlatformIO will compile them to static libraries and link into executable file.
+
+The source code of each library should be placed in a an own separate directory
+("lib/your_library_name/[here are source files]").
+
+For example, see a structure of the following two libraries `Foo` and `Bar`:
+
+|--lib
+|  |
+|  |--Bar
+|  |  |--docs
+|  |  |--examples
+|  |  |--src
+|  |     |- Bar.c
+|  |     |- Bar.h
+|  |  |- library.json (optional, custom build options, etc) https://docs.platformio.org/page/librarymanager/config.html
+|  |
+|  |--Foo
+|  |  |- Foo.c
+|  |  |- Foo.h
+|  |
+|  |- README --> THIS FILE
+|
+|- platformio.ini
+|--src
+   |- main.c
+
+and a contents of `src/main.c`:
+```
+#include <Foo.h>
+#include <Bar.h>
+
+int main (void)
+{
+  ...
+}
+
+```
+
+PlatformIO Library Dependency Finder will find automatically dependent
+libraries scanning project source files.
+
+More information about PlatformIO Library Dependency Finder
+- https://docs.platformio.org/page/librarymanager/ldf.html

devices/presence_sensor/platformio.ini

@@ -0,0 +1,24 @@
+; PlatformIO Project Configuration File
+;
+;   Build options: build flags, source filter
+;   Upload options: custom upload port, speed and extra flags
+;   Library options: dependencies, extra library storages
+;   Advanced options: extra scripting
+;
+; Please visit documentation for the other options and examples
+; https://docs.platformio.org/page/projectconf.html
+
+[env:attiny85]
+platform = atmelavr
+board = attiny85
+framework = arduino
+lib_deps =
+	sui77/rc-switch @ ^2.6.4
+lib_extra_dirs = 
+	../../lib
+upload_protocol = stk500v1
+upload_flags = 
+	-P$UPLOAD_PORT
+	-b$UPLOAD_SPEED
+upload_port = /dev/ttyACM0
+upload_speed = 19200

devices/presence_sensor/src/presence_sensor.cpp

@@ -0,0 +1,37 @@
+#include <Arduino.h>
+#include <TinyPower.h>
+#include "ContactSensor.h"
+
+#define MINUTES(value)		(uint16_t)(value*60/8)	// minutes*60(seconds)/8s(WDT)
+#define HOURS(value)		(uint16_t)(MINUTES(value)*60)
+
+#define SEND_INTERVAL		MINUTES(2)
+#define SEND_VCC_INTERVAL	HOURS(6)
+
+// Pins
+#define SENDER_PIN PIN_B2
+
+volatile uint16_t counter = 0;
+ContactSensor sensor(PRESENCE_SENSOR);
+
+void setup() {
+
+	TinySwitch::setup(SENDER_PIN);
+	TinyPower::setup();
+	TinyPower::enableWdt(WDTO_8S);
+}
+
+void loop() {
+	if (counter == 0) {
+		sensor.sendStateAndVoltage(false);
+	} else if (counter % SEND_INTERVAL == 0) {
+		sensor.sendState(false);
+	}
+	TinyPower::sleep();
+}
+
+ISR(WDT_vect) {
+	if (++counter % SEND_VCC_INTERVAL == 0) {
+		counter = 0;
+	}
+}

devices/presence_sensor/test/README

@@ -0,0 +1,11 @@
+
+This directory is intended for PlatformIO Unit Testing and project tests.
+
+Unit Testing is a software testing method by which individual units of
+source code, sets of one or more MCU program modules together with associated
+control data, usage procedures, and operating procedures, are tested to
+determine whether they are fit for use. Unit testing finds problems early
+in the development cycle.
+
+More information about PlatformIO Unit Testing:
+- https://docs.platformio.org/page/plus/unit-testing.html

devices/temp_sensor/.gitignore

@@ -0,0 +1,5 @@
+.pio
+.vscode/.browse.c_cpp.db*
+.vscode/c_cpp_properties.json
+.vscode/launch.json
+.vscode/ipch

devices/temp_sensor/README.md

@@ -0,0 +1,14 @@
+# Temperature sensor
+
+It uses a [TMP36](https://cloud.hodos.ro/wiki/ha/datasheets/TMP35_36_37.pdf) to read temperature and it is optimised for power consumption.  
+It uses watch dog that wakes every 8s and increments a counter. Once the counter reaches a certain value (e.g. equivalent to 1 hour), it will read and send temperature to the gateway.  
+Every 12 hours the voltage is also read and sent.
+
+According to the [battery life calculator](https://www.allaboutcircuits.com/tools/battery-lifetime-calculator/), a cell coin battery with a capacity of `200mAh` should last for 
+`~ 3 years`, given that:
+- Current consumption of device during sleep is `4.5uA`
+- Device wakes up every `hour`
+- Current consumption of device during wake is `10mA`
+- Duration of wake time is `1000 ms`
+
+![Schematics](docs/temp_sensor_bb.png)

devices/temp_sensor/include/Dht22Sensor.h

@@ -0,0 +1,56 @@
+#pragma once
+
+#include <DHT.h>
+#include <HumiditySensor.h>
+#include "TempSensor.h"
+
+#define TEMP_POSITIVE PIN_B3
+#define DHT_PIN PIN_B4
+
+struct DhtValues {
+    int temperature;
+    int humidity;
+};
+
+class Dht22Sensor : public TempSensor, public HumiditySensor {
+    DHT dht = DHT(DHT_PIN, DHT22);
+    DhtValues values;
+
+public:
+    Dht22Sensor(short id) :
+        TempSensor(id), HumiditySensor(id) {
+    }
+
+    void setup() override {
+        pinMode(TEMP_POSITIVE, OUTPUT);
+        digitalWrite(TEMP_POSITIVE, HIGH);
+        dht.begin();
+        delay(2000);
+    }
+
+    bool readTemp() override {
+        float temp = dht.readTemperature();
+        float humid = dht.readHumidity();
+        bool success = !isnan(temp) && !isnan(humid);
+        values.temperature = roundf(temp * 10);
+        values.humidity = roundf(humid * 10);
+        return success;
+    }
+
+    void sendValues(bool voltage) override {
+        voltage ? sendTempAndVoltage(values.temperature) : sendTemp(values.temperature);
+        delay(100);
+        sendHumidity(values.humidity);
+    }
+
+    void turnOnSensor() override {
+        pinMode(DHT_PIN, INPUT_PULLUP);
+        digitalWrite(TEMP_POSITIVE, HIGH);
+    }
+
+    void turnOffSensor() override {
+        digitalWrite(TEMP_POSITIVE, LOW);
+        pinMode(DHT_PIN, OUTPUT);
+        digitalWrite(DHT_PIN, LOW);
+    }
+};

devices/temp_sensor/include/README

@@ -0,0 +1,39 @@
+
+This directory is intended for project header files.
+
+A header file is a file containing C declarations and macro definitions
+to be shared between several project source files. You request the use of a
+header file in your project source file (C, C++, etc) located in `src` folder
+by including it, with the C preprocessing directive `#include'.
+
+```src/main.c
+
+#include "header.h"
+
+int main (void)
+{
+ ...
+}
+```
+
+Including a header file produces the same results as copying the header file
+into each source file that needs it. Such copying would be time-consuming
+and error-prone. With a header file, the related declarations appear
+in only one place. If they need to be changed, they can be changed in one
+place, and programs that include the header file will automatically use the
+new version when next recompiled. The header file eliminates the labor of
+finding and changing all the copies as well as the risk that a failure to
+find one copy will result in inconsistencies within a program.
+
+In C, the usual convention is to give header files names that end with `.h'.
+It is most portable to use only letters, digits, dashes, and underscores in
+header file names, and at most one dot.
+
+Read more about using header files in official GCC documentation:
+
+* Include Syntax
+* Include Operation
+* Once-Only Headers
+* Computed Includes
+
+https://gcc.gnu.org/onlinedocs/cpp/Header-Files.html

devices/temp_sensor/include/TempSensor.h

@@ -0,0 +1,16 @@
+#pragma once
+
+#include <TemperatureSensor.h>
+
+class TempSensor : public TemperatureSensor {
+public:
+    TempSensor(short id) :
+        TemperatureSensor(id) {
+    }
+
+    virtual void setup() = 0;
+    virtual bool readTemp() = 0;
+    virtual void sendValues(bool voltage = false) = 0;
+    virtual void turnOnSensor() {}
+    virtual void turnOffSensor() {}
+};

devices/temp_sensor/include/Tmp36Sensor.h

@@ -0,0 +1,36 @@
+#pragma once
+
+#include "TempSensor.h"
+
+#define TEMP_POSITIVE PIN_B3
+#define TEMP_PIN A2
+
+class Tmp36Sensor : public TempSensor {
+    int temperature;
+public:
+    Tmp36Sensor(short id) :
+        TempSensor(id) {
+    }
+
+    void setup() override {
+        analogReference(INTERNAL);
+        pinMode(TEMP_POSITIVE, OUTPUT);
+        digitalWrite(TEMP_POSITIVE, LOW);
+    }
+
+    bool readTemp() override {
+        digitalWrite(TEMP_POSITIVE, HIGH);
+        delay(10);
+        int reading = analogRead(TEMP_PIN);
+        digitalWrite(TEMP_POSITIVE, LOW);
+
+        float voltage = reading * (1100 / 1024.0);
+        float temperatureC = (voltage - 500) / 10;
+        temperature = roundf(temperatureC * 10);
+        return true;
+    }
+
+    void sendValues(bool voltage) override {
+        voltage ? sendTempAndVoltage(temperature) : sendTemp(temperature);
+    }
+};

devices/temp_sensor/lib/README

@@ -0,0 +1,46 @@
+
+This directory is intended for project specific (private) libraries.
+PlatformIO will compile them to static libraries and link into executable file.
+
+The source code of each library should be placed in a an own separate directory
+("lib/your_library_name/[here are source files]").
+
+For example, see a structure of the following two libraries `Foo` and `Bar`:
+
+|--lib
+|  |
+|  |--Bar
+|  |  |--docs
+|  |  |--examples
+|  |  |--src
+|  |     |- Bar.c
+|  |     |- Bar.h
+|  |  |- library.json (optional, custom build options, etc) https://docs.platformio.org/page/librarymanager/config.html
+|  |
+|  |--Foo
+|  |  |- Foo.c
+|  |  |- Foo.h
+|  |
+|  |- README --> THIS FILE
+|
+|- platformio.ini
+|--src
+   |- main.c
+
+and a contents of `src/main.c`:
+```
+#include <Foo.h>
+#include <Bar.h>
+
+int main (void)
+{
+  ...
+}
+
+```
+
+PlatformIO Library Dependency Finder will find automatically dependent
+libraries scanning project source files.
+
+More information about PlatformIO Library Dependency Finder
+- https://docs.platformio.org/page/librarymanager/ldf.html

devices/temp_sensor/platformio.ini

@@ -0,0 +1,27 @@
+; PlatformIO Project Configuration File
+;
+;   Build options: build flags, source filter
+;   Upload options: custom upload port, speed and extra flags
+;   Library options: dependencies, extra library storages
+;   Advanced options: extra scripting
+;
+; Please visit documentation for the other options and examples
+; https://docs.platformio.org/page/projectconf.html
+
+[env:attiny85]
+platform = atmelavr
+board = attiny85
+framework = arduino
+lib_deps =
+	adafruit/Adafruit Unified Sensor @ ^1.1.4
+    adafruit/DHT sensor library@^1.4.3
+	sui77/rc-switch @ ^2.6.4
+lib_extra_dirs = 
+	../../lib
+build_flags = -D DHT_SENSOR=0
+upload_protocol = stk500v1
+upload_flags = 
+	-P$UPLOAD_PORT
+	-b$UPLOAD_SPEED
+upload_port = /dev/ttyACM0
+upload_speed = 19200

devices/temp_sensor/src/temp_sensor.cpp

@@ -0,0 +1,57 @@
+#include <Arduino.h>
+#include <TinyPower.h>
+#include "Tmp36Sensor.h"
+#include "Dht22Sensor.h"
+
+#define SEND_INTERVAL 450						// 450*8s = ~60min
+#define SEND_VCC_INTERVAL (SEND_INTERVAL*12)	// every 12 hours
+
+// Pins
+#define SENDER PIN_B2
+
+#if !DHT_SENSOR
+TempSensor &tempSensor = *(new Tmp36Sensor(TEMP_SENSOR));
+#else
+TempSensor& tempSensor = *(new Dht22Sensor(TEMP_SENSOR));
+#endif
+
+volatile int counter = 0;
+
+void setup() {
+
+	tempSensor.setup();
+
+	TinySwitch::setup(SENDER);
+	TinyPower::setup();
+	TinyPower::enableWdt(WDTO_8S);
+}
+
+void loop() {
+	static bool retry = false;
+
+	if (retry || (counter % SEND_INTERVAL == 0)) {
+		bool success = tempSensor.readTemp();
+		if (success) {
+			if (counter % SEND_VCC_INTERVAL == 0) {
+				tempSensor.sendValues(true);
+				counter = 0;
+			} else {
+				tempSensor.sendValues();
+			}
+
+			tempSensor.turnOffSensor();
+		}
+		if (retry && !success) {
+			tempSensor.turnOffSensor();
+		}
+		retry = !retry && !success;
+	}
+	TinyPower::sleep();
+}
+
+ISR(WDT_vect) {
+	counter++;
+	if (((counter + 1) % SEND_INTERVAL == 0) || ((counter + 1) % SEND_VCC_INTERVAL == 0)) {
+		tempSensor.turnOnSensor();
+	}
+}

devices/temp_sensor/test/README

@@ -0,0 +1,11 @@
+
+This directory is intended for PlatformIO Unit Testing and project tests.
+
+Unit Testing is a software testing method by which individual units of
+source code, sets of one or more MCU program modules together with associated
+control data, usage procedures, and operating procedures, are tested to
+determine whether they are fit for use. Unit testing finds problems early
+in the development cycle.
+
+More information about PlatformIO Unit Testing:
+- https://docs.platformio.org/page/plus/unit-testing.html

devices/window1/README.md

@@ -0,0 +1,8 @@
+# Window1
+Sensor for mezzanine window
+
+## Schema
+![](./wiki/schema.png)
+
+## Breadboard
+![](./wiki/breadboard.png)

devices/window1/examples/rf24-sender.ino

@@ -0,0 +1,103 @@
+/*
+This program is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License
+version 2 as published by the Free Software Foundation.
+
+    rf24ping85.ino by tong67 ( https://github.com/tong67 )
+    This is an example of how to use the RF24 class to communicate with ATtiny85 and other node.
+    Write this sketch to an ATtiny85. It will act like the 'transmit' mode of GettingStarted.ino
+    Write GettingStarted.ino sketch to UNO (or other board or RPi) and put the node in 'receiver' mode.
+    The ATtiny85 will transmit a counting number every second starting from 1.
+    The ATtiny85 uses the tiny-core by CodingBadly (https://code.google.com/p/arduino-tiny/)
+    When direct use of 3v3 does not work (UNO boards have bad 3v3 line) use 5v with LED (1.8V ~ 2.2V drop)
+    For low power consumption solutions floating pins (SCK and MOSI) should be pulled high or low with eg. 10K
+
+    ** Hardware configuration **
+    ATtiny25/45/85 Pin map with CE_PIN 3 and CSN_PIN 4
+                                 +-\/-+
+                   NC      PB5  1|o   |8  Vcc --- nRF24L01  VCC, pin2 --- LED --- 5V
+    nRF24L01  CE, pin3 --- PB3  2|    |7  PB2 --- nRF24L01  SCK, pin5
+    nRF24L01 CSN, pin4 --- PB4  3|    |6  PB1 --- nRF24L01 MOSI, pin7
+    nRF24L01 GND, pin1 --- GND  4|    |5  PB0 --- nRF24L01 MISO, pin6
+                                 +----+
+
+    ATtiny25/45/85 Pin map with CE_PIN 3 and CSN_PIN 3 => PB3 and PB4 are free to use for application
+    Circuit idea from http://nerdralph.blogspot.ca/2014/01/nrf24l01-control-with-3-attiny85-pins.html
+    Original RC combination was 1K/100nF. 22K/10nF combination worked better.
+	For best settletime delay value in RF24::csn() the timingSearch3pin.ino scatch can be used.
+    This configuration is enabled when CE_PIN and CSN_PIN are equal, e.g. both 3
+    Because CE is always high the power consumption is higher than for 5 pins solution
+                                                                                            ^^
+                                 +-\/-+           nRF24L01   CE, pin3 ------|              //
+                           PB5  1|o   |8  Vcc --- nRF24L01  VCC, pin2 ------x----------x--|<|-- 5V
+                   NC      PB3  2|    |7  PB2 --- nRF24L01  SCK, pin5 --|<|---x-[22k]--|  LED
+                   NC      PB4  3|    |6  PB1 --- nRF24L01 MOSI, pin6  1n4148 |
+    nRF24L01 GND, pin1 -x- GND  4|    |5  PB0 --- nRF24L01 MISO, pin7         |
+                        |        +----+                                       |
+                        |-----------------------------------------------||----x-- nRF24L01 CSN, pin4
+                                                                       10nF
+
+    ATtiny24/44/84 Pin map with CE_PIN 8 and CSN_PIN 7
+	Schematic provided and successfully tested by Carmine Pastore (https://github.com/Carminepz)
+                                  +-\/-+
+    nRF24L01  VCC, pin2 --- VCC  1|o   |14 GND --- nRF24L01  GND, pin1
+                            PB0  2|    |13 AREF
+                            PB1  3|    |12 PA1
+                            PB3  4|    |11 PA2 --- nRF24L01   CE, pin3
+                            PB2  5|    |10 PA3 --- nRF24L01  CSN, pin4
+                            PA7  6|    |9  PA4 --- nRF24L01  SCK, pin5
+    nRF24L01 MOSI, pin7 --- PA6  7|    |8  PA5 --- nRF24L01 MISO, pin6
+                                  +----+
+*/
+
+// CE and CSN are configurable, specified values for ATtiny85 as connected above
+#define CE_PIN 5
+#define CSN_PIN 3
+//#define CSN_PIN 3 // uncomment for ATtiny85 3 pins solution
+
+#include <RF24.h>
+
+RF24 radio(CE_PIN, CSN_PIN);
+
+byte addresses[][6] = {
+  "1Node","2Node"};
+unsigned long payload = 0;
+
+void setup() {
+  // Setup and configure rf radio
+  radio.begin(); // Start up the radio
+  radio.setAutoAck(1); // Ensure autoACK is enabled
+  radio.setRetries(15,15); // Max delay between retries & number of retries
+  radio.setDataRate(RF24_250KBPS);
+  radio.setPALevel(RF24_PA_LOW);
+  radio.openWritingPipe(addresses[1]); // Write to device address '2Node'
+  radio.openReadingPipe(1,addresses[0]); // Read on pipe 1 for device address '1Node'
+  radio.startListening(); // Start listening
+}
+
+void loop(void){
+
+  radio.stopListening(); // First, stop listening so we can talk.
+  payload++;
+  radio.write( &payload, sizeof(unsigned long) );
+  radio.startListening(); // Now, continue listening
+
+    unsigned long started_waiting_at = micros(); // Set up a timeout period, get the current microseconds
+  boolean timeout = false; // Set up a variable to indicate if a response was received or not
+
+  while ( !radio.available() ){ // While nothing is received
+    if (micros() - started_waiting_at > 200000 ){ // If waited longer than 200ms, indicate timeout and exit while loop
+      timeout = true;
+      break;
+    }
+
+  }
+
+  if ( !timeout ){ // Describe the results
+    unsigned long got_time; // Grab the response, compare, and send to debugging spew
+    radio.read( &got_time, sizeof(unsigned long) );
+  }
+
+  // Try again 1s later
+  delay(1000);
+}

devices/window1/window1.ino

@@ -0,0 +1,100 @@
+#include <RCSwitch.h>
+#include <avr/sleep.h>
+#include <avr/power.h>
+#include <avr/wdt.h>
+
+// Utility macros
+#define adc_disable() (ADCSRA &= ~_BV(ADEN)) // disable ADC (before power-off)
+#define adc_enable()  (ADCSRA |= _BV(ADEN)) // re-enable ADC
+#define enable_pin_interrupts()  (GIMSK |= _BV(PCIE))  // Enable Pin Change Interrupts
+
+// Pins
+#define SWITCH 0
+#define SENDER 2
+#define CONTROLLER 4
+
+RCSwitch mySwitch = RCSwitch();
+char* WND_OPEN  =  "00000000000000000000000001000001";
+char* WND_CLOSED = "00000000000000000000000001100001";
+
+int counter = 0;
+bool currentState;
+
+void setup() {
+    
+  pinMode(SWITCH, INPUT_PULLUP);
+  pinMode(CONTROLLER, OUTPUT);
+  digitalWrite(CONTROLLER, LOW);
+
+  mySwitch.enableTransmit(SENDER);
+  mySwitch.setProtocol(2);
+
+  updateState();
+  sendWindowState();
+
+  set_sleep_mode(SLEEP_MODE_PWR_DOWN);
+  enable_pin_interrupts();
+  enableWdt();
+
+}
+
+void loop() {
+  sleep();
+}
+
+void updateState() {
+  currentState = digitalRead(SWITCH);
+}
+
+void sendWindowState() {
+  byte state = digitalRead(SWITCH);
+  if (state == HIGH) {
+    mySwitch.send(WND_OPEN);
+  } else {
+    mySwitch.send(WND_CLOSED);
+  }
+}
+
+void sleep() {
+  PCMSK |= _BV(PCINT0);                   // Use PB0 as interrupt pin
+  adc_disable();
+  
+  sleep_enable();                         // Sets the Sleep Enable bit in the MCUCR Register (SE BIT)
+  sei();                                  // Enable interrupts
+
+  sleep_cpu();                            // sleep
+  
+  cli();                                  // Disable interrupts
+  PCMSK &= ~_BV(PCINT0);                  // Turn off PB0 as interrupt pin
+  sleep_disable();                        // Clear SE bit
+  adc_enable();
+  
+  sei();                                  // Enable interrupts
+}
+
+ISR(PCINT0_vect) {
+  sendWindowState();
+}
+
+ISR(WDT_vect) {
+  bool state = digitalRead(SWITCH);
+  if (state != currentState) {
+    sendWindowState();
+    updateState();
+    return;
+  }
+  counter++;
+  if (counter % 76 == 0) {
+    sendWindowState();
+    counter = 0;
+  }
+}
+
+//enable the wdt for 8sec interrupt
+void enableWdt()
+{
+    MCUSR = 0x00;
+    WDTCR |= _BV(WDCE) | _BV(WDE);
+    WDTCR = _BV(WDIE) | _BV(WDP3) | _BV(WDP0);    //8192ms
+}
+

devices/window2/README.md

@@ -0,0 +1,8 @@
+# Window2
+Sensor for kids room window
+
+## Schema
+![](./wiki/schema.png)
+
+## Breadboard
+![](./wiki/breadboard.png)

devices/window2/window2.ino

@@ -8,8 +8,8 @@
 ContactSensor sensor = ContactSensor(WINDOW2, SENDER);
 
 volatile int counter = 0;
-volatile bool currentState;
 volatile bool shouldSend = true;
+bool currentState = false;
 
 void setup() {
     
@@ -24,31 +24,29 @@ void setup() {
 void loop() {
   if (shouldSend) {
 	  shouldSend = false;
-	  sensor.sendStateAndVoltage(readState());
+	  currentState = digitalRead(SWITCH);
+	  sensor.sendState(currentState);
   }
   TinyPower::sleep();
 }
 
-byte readState() {
-  return digitalRead(SWITCH);
-}
-
 ISR(PCINT0_vect) {
   shouldSend = true;
   wdt_reset();
   counter = 0;
+  TinyPower::enableWdt(WDTO_8S);
 }
 
 ISR(WDT_vect) {
-  bool state = readState();
-  if (state != currentState) {
+  counter++;
+  if (counter == 1) {
 	  shouldSend = true;
-	  currentState = state;
 	  return;
   }
-  counter++;
-  if (counter % 225 == 0) {
+  if (counter % 75 == 0) {
 	  shouldSend = true;
-	  counter = 0;
+  }
+  if (!currentState && counter >= 225) {
+	  TinyPower::disableWdt();
   }
 }

include/Dht.h

@@ -0,0 +1,40 @@
+#if DHT_SENSOR
+
+#include <ArduinoJson.h>
+#include <Adafruit_Sensor.h>
+#include <DHT.h>
+
+#define DHT11_PIN 12
+#define READ_INTERVAL(c) (c*60*1000UL)	// read interval in minutes
+
+DHT dht = DHT(DHT11_PIN, DHT11);
+uint32_t currentTime = 0;
+
+namespace Dht {
+	void setup() {
+		dht.begin();
+	}
+
+	void read() {
+		currentTime = millis();
+		static uint32_t lastReadTime = 0;
+		if (currentTime > lastReadTime) {
+			lastReadTime = currentTime + READ_INTERVAL(5);
+			StaticJsonDocument<200> jsonDoc;
+			JsonObject dht11 = jsonDoc.createNestedObject("dht11");
+			dht11["temperature"] = dht.readTemperature();
+			dht11["humidity"] = dht.readHumidity();
+			serializeJson(jsonDoc, Serial);
+			Serial.println();
+		}
+	}
+}
+#else
+namespace Dht {
+	void setup() {
+	}
+
+	void read() {
+}
+}
+#endif

include/Protocol.h

@@ -0,0 +1,35 @@
+#pragma once
+#include <ArduinoJson.h>
+#include <RCSwitch.h>
+
+enum ProtocolNo : uint8_t {
+    NO_PROTOCOL = 0,
+    PROTOCOL_1 = 1,
+    PROTOCOL_2 = 2,
+    PROTOCOL_13 = 13
+};
+
+class Protocol {
+protected:
+    ProtocolNo no;
+
+public:
+    explicit Protocol(ProtocolNo protocol) : no(protocol) {}
+
+    Protocol& setProtocol(uint8_t p) {
+        no = static_cast<ProtocolNo>(p);
+        return *this;
+    }
+
+    virtual void fromJson(JsonObjectConst& rcSwitch, RCSwitch& rcDevice) {
+        ProtocolNo protocol = rcSwitch["protocol"];
+        rcDevice.setProtocol(protocol);
+        rcDevice.send(rcSwitch["value"]);
+    }
+
+    virtual void toJson(uint32_t value, JsonDocument& jsonDoc) {
+        JsonObject rcSwitch = jsonDoc.createNestedObject("rcSwitch");
+        rcSwitch["protocol"] = no;
+        rcSwitch["value"] = value;
+    }
+} fallbackProtocol{ NO_PROTOCOL };

include/Protocol_1.h

@@ -0,0 +1,36 @@
+#pragma once
+#include "Protocol.h"
+#include "RcDecoder.h"
+
+class Protocol_1 : public Protocol {
+
+public:
+    Protocol_1() : Protocol(PROTOCOL_1) {}
+
+    void fromJson(JsonObjectConst& rcSwitch, RCSwitch& rcDevice) override {
+        ProtocolNo protocol = rcSwitch["protocol"];
+        rcDevice.setProtocol(protocol);
+        const char* group = rcSwitch["group"];
+        int channel = rcSwitch["channel"];
+        rcSwitch["state"] ? rcDevice.switchOn(group, channel) : rcDevice.switchOff(group, channel);
+    }
+
+    void toJson(uint32_t value, JsonDocument& jsonDoc) override {
+        JsonObject rcSwitch = jsonDoc.createNestedObject("rcSwitch");
+        rcSwitch["protocol"] = no;
+        RcDecoder decoder;
+        decoder.decode(value);
+        rcSwitch["state"] = decoder.state;
+        rcSwitch["group"] = decoder.group;
+        rcSwitch["channel"] = decoder.device;
+        rcSwitch["raw_value"] = value;
+    }
+
+#if defined(ESP8266)
+    static std::string buildId(const char* group, const uint8_t channel) {
+        char uId[30];
+        sprintf(uId, "%s_%u", group, channel);
+        return std::string{ uId };
+    }
+#endif
+} protocol1;

include/Protocol_2.h

@@ -0,0 +1,35 @@
+#pragma once
+#include "Protocol.h"
+#include "TinyComponent.h"
+
+class Protocol_2 : public Protocol {
+
+public:
+    Protocol_2() : Protocol(PROTOCOL_2) {}
+
+    void toJson(uint32_t value, JsonDocument& jsonDoc) override {
+        switch (value) {
+        case 637541753L:
+        case 771759481L: {
+            JsonObject motion = jsonDoc.createNestedObject("motion");
+            motion["kitchen"] = value == 637541753L ? "on" : "off";
+            break;
+        }
+        case 1879048230L:
+        case 1879048198L: {
+            JsonObject motion = jsonDoc.createNestedObject("motion");
+            motion["basement"] = value == 1879048230L ? "on" : "off";
+            break;
+        }
+        default:
+            StaticJsonDocument<200> jsonSensor;
+            if (buildSensorJson(value, jsonSensor)) {
+                jsonDoc.set(jsonSensor);
+            } else {
+                Protocol::toJson(value, jsonDoc);
+            }
+            break;
+        }
+    }
+
+} protocol2;

include/Protocol_Doorbell.h

@@ -0,0 +1,62 @@
+#pragma once
+
+#if ENABLE_DOORBELL
+
+#include "Protocol.h"
+
+#define BIT_LENGTH 40
+#define BIT_LENGTH_3 BIT_LENGTH*3
+#define TX_DELAY 620
+
+class Protocol_Doorbell : public Protocol {
+
+public:
+    Protocol_Doorbell() : Protocol(PROTOCOL_13) {}
+
+    void ring(const char* value) {
+        preamble();
+        for (int i = 0; i < 7; i++) {
+            delayMicroseconds(TX_DELAY);
+            code(value);
+        }
+    }
+
+private:
+    void transmitBit(uint8_t value) {
+        digitalWrite(SEND_PIN, value);
+        delayMicroseconds(BIT_LENGTH);
+        digitalWrite(SEND_PIN, LOW);
+    }
+
+    void transmitHigh() {
+        digitalWrite(SEND_PIN, HIGH);
+        delayMicroseconds(BIT_LENGTH_3);
+        digitalWrite(SEND_PIN, LOW);
+        delayMicroseconds(BIT_LENGTH);
+    }
+
+    void transmitLow() {
+        digitalWrite(SEND_PIN, HIGH);
+        delayMicroseconds(BIT_LENGTH);
+        digitalWrite(SEND_PIN, LOW);
+        delayMicroseconds(BIT_LENGTH_3);
+    }
+
+    void preamble() {
+        noInterrupts();
+        for (int i = 0; i < 370; i++) {
+            transmitBit(HIGH);
+            transmitBit(LOW);
+        }
+        interrupts();
+    }
+
+    void code(const char* value) {
+        noInterrupts();
+        for (const char* p = value; *p; p++) {
+            *p == '1' ? transmitHigh() : transmitLow();
+        }
+        interrupts();
+    }
+} doorbell;
+#endif

include/README

@@ -0,0 +1,39 @@
+
+This directory is intended for project header files.
+
+A header file is a file containing C declarations and macro definitions
+to be shared between several project source files. You request the use of a
+header file in your project source file (C, C++, etc) located in `src` folder
+by including it, with the C preprocessing directive `#include'.
+
+```src/main.c
+
+#include "header.h"
+
+int main (void)
+{
+ ...
+}
+```
+
+Including a header file produces the same results as copying the header file
+into each source file that needs it. Such copying would be time-consuming
+and error-prone. With a header file, the related declarations appear
+in only one place. If they need to be changed, they can be changed in one
+place, and programs that include the header file will automatically use the
+new version when next recompiled. The header file eliminates the labor of
+finding and changing all the copies as well as the risk that a failure to
+find one copy will result in inconsistencies within a program.
+
+In C, the usual convention is to give header files names that end with `.h'.
+It is most portable to use only letters, digits, dashes, and underscores in
+header file names, and at most one dot.
+
+Read more about using header files in official GCC documentation:
+
+* Include Syntax
+* Include Operation
+* Once-Only Headers
+* Computed Includes
+
+https://gcc.gnu.org/onlinedocs/cpp/Header-Files.html

include/RcDecoder.h

@@ -0,0 +1,38 @@
+#define RC_STATE(value) value & 0x1
+#define RC_DEVICE(value) (value >> 1) & 0x1F
+#define RC_GROUP(value) (value >> 6) & 0x1F
+
+struct RcDecoder {
+    bool state;
+    char group[6];
+    uint8_t device;
+
+    void decode(uint32_t value) {
+        value = value >> 2;
+        uint32_t res = 0;
+        for (int i = 0; i < 12; i++) {
+            res |= ((value & 1) ^ 1) << i;
+            value = value >> 2;
+        }
+
+        state = RC_STATE(res);
+        sprintf(group, "%05u", RC_GROUP(res));
+        switch (RC_DEVICE(res)) {
+        case 0b10000:
+            device = 1;
+            break;
+        case 0b01000:
+            device = 2;
+            break;
+        case 0b00100:
+            device = 3;
+            break;
+        case 0b00010:
+            device = 4;
+            break;
+        case 0b00001:
+            device = 5;
+            break;
+        }
+    }
+};

include/TinyComponent.h

@@ -0,0 +1,34 @@
+#include <ArduinoJson.h>
+#include "Tiny.h"
+
+bool buildSensorJson(uint32_t value, JsonDocument& jsonDoc) {
+    JsonObject sensor = jsonDoc.createNestedObject("sensor");
+    sensor["id"] = ID(value);
+
+    float voltage = (float)GET_VCC(value) / 1000;
+    JsonObject diagnostic = sensor.createNestedObject("diagnostic");
+    if (voltage != 0) {
+        diagnostic["voltage"] = voltage;
+    } else {
+        diagnostic["voltage"] = "";
+    }
+
+    switch (GET_TYPE(value)) {
+    case SensorType::GENERIC:
+        sensor["value"] = GET_VALUE(value);
+        break;
+    case SensorType::TEMPERATURE:
+        sensor["temperature"] = (float)GET_TEMP(value) / 10;
+        break;
+    case SensorType::HUMIDITY:
+        sensor["humidity"] = (float)GET_HUMIDITY(value) / 10;
+        break;
+    case SensorType::CONTACT:
+        sensor["state"] = GET_STATE(value) ? "ON" : "OFF";
+        break;
+    default:
+        return false;
+    }
+
+    return true;
+}

include/devices.h

@@ -0,0 +1,82 @@
+#pragma once
+
+#include "rc_devices.h"
+
+using namespace Ha;
+
+auto roomSensor = Builder<TemperatureSensor>(TEMP_SENSOR)
+    .asDevice(&DeviceConfig::create(TEMP_SENSOR)
+        .withName("Servers room")
+        .withManufacturer("Atmel")
+        .withModel("AtTiny85")
+        .withArea("Basement")
+        .withParent(gatewayDevice))
+    .withValueTemplate("{{ value_json.sensor.temperature }}")
+    .addPreconfigured(batterySensors<TemperatureSensor>(TEMP_SENSOR, BATTERY_PERCENTAGE_TEMPLATE(2.5, 2)))
+    .build();
+
+auto tankSensor = Builder<Sensor>(new Sensor{ "Level", OIL_SENSOR })
+    .asDevice(&DeviceConfig::create(OIL_SENSOR)
+        .withName("Oil tank")
+        .withManufacturer("Arduino")
+        .withModel("Pro Mini")
+        .withArea("Basement")
+        .withParent(gatewayDevice))
+    .withUnitMeasure("%")
+    .withSensorStateClass(MEASUREMENT)
+    .withIcon("mdi:hydraulic-oil-level")
+    .withValueTemplate("{{ 100 - ((value_json.sensor.value-12)|float*100/120)|round(2) }}")
+    .addSecondary(
+        Builder<Sensor>(new Sensor{ "Depth", OIL_SENSOR })
+        .withDeviceClass("distance")
+        .withUnitMeasure("cm")
+        .withSensorStateClass(MEASUREMENT)
+        .withValueTemplate("{{ value_json.sensor.value }}")
+        .build()
+    )
+    .addPreconfigured(batterySensors<Sensor>(OIL_SENSOR, BATTERY_PERCENTAGE_TEMPLATE(4, 2.4)))
+    .build();
+
+auto presenceTracker = Builder<BinarySensor>(PRESENCE_SENSOR)
+    .asDevice(&DeviceConfig::create(PRESENCE_SENSOR)
+        .withName("Kid presence")
+        .withManufacturer("Atmel")
+        .withModel("AtTiny85")
+        .withParent(gatewayDevice))
+    .withValueTemplate("{{ value_json.sensor.state }}")
+    .addPreconfigured(batterySensors<BinarySensor>(PRESENCE_SENSOR, BATTERY_PERCENTAGE_TEMPLATE(2.7, 0.6)))
+    .withOffDelaySeconds(5*60)
+    .withDeviceClass("presence")
+    .build();
+
+Command* commands[] = {
+    HaESP::restartButton()
+    .asDevice(gatewayDevice)
+    .addPreconfigured(HaESP::heapStats)
+    .addPreconfigured(HaESP::restartInfo)
+    .addPreconfigured(HaESP::wifiInfo)
+    .build(),
+#if ENABLE_DOORBELL
+    Builder<Button>(new Button{"Front door", "doorbell_front",
+        [](const char* msg) {
+            if (strcmp("PRESS", msg) == 0) doorbell.ring("00000000110100101000100");
+        }
+    })
+    .asDevice(
+        &DeviceConfig::create("doorbell")
+        .withName("Doorbell")
+        .withManufacturer("Thomson")
+        .withModel("Kinetic Halo")
+        .withParent(gatewayDevice)
+        )
+    .build(),
+#endif
+    new EasyHomeSwitch{'A', array<uint32_t, 4>{ 4483136, 4626800, 4661552, 4819632 }, array<uint32_t, 4>{ 4326544, 4537104, 4767520, 4972704 }, "KabelBox", "Basement"},
+    new EasyHomeSwitch{'B', array<uint32_t, 4>{ 4483140, 4626804, 4661556, 4819636 }, array<uint32_t, 4>{ 4326548, 4537108, 4767524, 4972708 }, "Router ext", "Dining room"},
+    new PollinSwitch{"00001", 1},
+    new PollinSwitch{"00001", 2, "Fire Tv", "Living room"},
+    new PollinSwitch{"00001", 3, "Diningroom player", "Dining room"},
+    new PollinSwitch{"00001", 4},
+    new PollinSwitch{"00011", 4, "homebox"},
+    new PollinSwitch{"11111", 4, "Train", "Playroom"}
+};

include/huzzah.h

@@ -0,0 +1,122 @@
+#include <TaskScheduler.h>
+
+#define MQTT_HOST IPAddress(192, 168, 5, 11)
+#define MQTT_PORT 1883
+
+using namespace std;
+
+Scheduler ts;
+
+#include "devices.h"
+#include "mqtt.h"
+#include "ota.h"
+#include "wifi.h"
+#include "webserver.h"
+
+#define RAW_TOPIC	MAIN_DEVICE_ID "/raw"
+
+namespace Board {
+
+	Task tReadCommand(TASK_IMMEDIATE, TASK_FOREVER, [](){
+		if (serialReader.readLine(Serial) > 0) {
+			char* cmd = serialReader.getBuffer();
+			if (strcmp("reset", cmd) == 0) {
+				Serial.println("resetting...");
+				ESP.restart();
+				Serial.println("resetting failed");
+			}
+			runJsonCommand(cmd);
+		}
+	}, &ts);
+
+	void turnLed(uint8_t led, bool on = true) {
+		on ? digitalWrite(led, LOW) : digitalWrite(led, HIGH);
+	}
+
+	void setup() {
+		// Serial.begin(9600, SERIAL_8N1, SERIAL_TX_ONLY);
+
+		pinMode(RED_LED, OUTPUT);
+		pinMode(BLUE_LED, OUTPUT);
+		turnLed(RED_LED, false);
+		turnLed(BLUE_LED);
+
+		WebServer::setup();
+		Mqtt::setup(&ts,
+			[] {turnLed(BLUE_LED, false);},
+			[] {turnLed(BLUE_LED);}
+		);
+		Wifi::setup(ts,
+			[] {
+				Ota::tLoop.enable();
+				Mqtt::tReConnect.enable();
+				WebServer::start();
+			},
+			[] {
+				Ota::tLoop.disable();
+				Mqtt::tReConnect.disable();
+				WebServer::stop();
+			}
+		);
+		Ota::setup(
+			[] {
+				Mqtt::publishCleanupConfig();
+				delay(2000);
+				Mqtt::disconnect();
+	            WebServer::stop();
+			});
+
+		tReadCommand.enable();
+	}
+
+	void loop() {
+		ts.execute();
+	}
+
+	void parseSwitches(JsonDocument& jsonDoc) {
+		JsonObjectConst rcSwitch = jsonDoc["rcSwitch"];
+		switch (static_cast<uint16_t>(rcSwitch["protocol"])) {
+		case 1: {
+			string id = Protocol_1::buildId(static_cast<const char*>(rcSwitch["group"]), static_cast<int>(rcSwitch["channel"]));
+			Ha::Switch* el = p1Switches[id];
+			if (el) el->updateState(static_cast<bool>(rcSwitch["state"]));
+			break;
+		}
+		case 2:
+			break;
+		default: {
+			uint32_t value = rcSwitch["value"];
+			auto range = onSwitches.equal_range(value);
+			for_each(range.first, range.second, [](mapswitches::value_type& x){
+				x.second->updateState(true);
+			});
+			range = offSwitches.equal_range(value);
+			for_each(range.first, range.second, [](mapswitches::value_type& x){
+				x.second->updateState(false);
+			});
+		}
+		}
+	}
+
+	void parseSensors(JsonDocument& jsonDoc, char* message) {
+		JsonObjectConst json = jsonDoc["sensor"];
+		string id = to_string((uint16_t)json["id"]);
+		auto sensor = GenericSensor::mapSensors[id];
+		if (sensor) sensor->updateState(message);
+	}
+
+	void publishResponse(JsonDocument& jsonDoc) {
+        char message[255];
+        serializeJson(jsonDoc, message);
+		Mqtt::publish(RAW_TOPIC, message);
+		if (jsonDoc.containsKey("rcSwitch")) parseSwitches(jsonDoc);
+		if (jsonDoc.containsKey("sensor")) parseSensors(jsonDoc, message);
+	}
+
+	void handleJsonError(JsonDocument& jsonError) {
+        char message[255];
+        serializeJson(jsonError, message);
+		Mqtt::publish(RAW_TOPIC, message);
+	}
+}
+// {"rcSwitch":{"protocol":1,"state":false,"group":"11111","channel":4}}

include/output.h

@@ -0,0 +1,70 @@
+static const char* bin2tristate(const char* bin);
+static char * dec2binWzerofill(unsigned long Dec, unsigned int bitLength);
+
+void output(unsigned long decimal, unsigned int length, unsigned int delay, unsigned int* raw, unsigned int protocol) {
+
+  const char* b = dec2binWzerofill(decimal, length);
+  Serial.print("Decimal: ");
+  Serial.print(decimal);
+  Serial.print(" (");
+  Serial.print( length );
+  Serial.print("Bit) Binary: ");
+  Serial.print( b );
+  Serial.print(" Tri-State: ");
+  Serial.print( bin2tristate( b) );
+  Serial.print(" PulseLength: ");
+  Serial.print(delay);
+  Serial.print(" microseconds");
+  Serial.print(" Protocol: ");
+  Serial.println(protocol);
+  
+  Serial.print("Raw data: ");
+  for (unsigned int i=0; i<= length*2; i++) {
+    Serial.print(raw[i]);
+    Serial.print(",");
+  }
+  Serial.println();
+  Serial.println();
+}
+
+static const char* bin2tristate(const char* bin) {
+  static char returnValue[50];
+  int pos = 0;
+  int pos2 = 0;
+  while (bin[pos]!='\0' && bin[pos+1]!='\0') {
+    if (bin[pos]=='0' && bin[pos+1]=='0') {
+      returnValue[pos2] = '0';
+    } else if (bin[pos]=='1' && bin[pos+1]=='1') {
+      returnValue[pos2] = '1';
+    } else if (bin[pos]=='0' && bin[pos+1]=='1') {
+      returnValue[pos2] = 'F';
+    } else {
+      return "not applicable";
+    }
+    pos = pos+2;
+    pos2++;
+  }
+  returnValue[pos2] = '\0';
+  return returnValue;
+}
+
+static char * dec2binWzerofill(unsigned long Dec, unsigned int bitLength) {
+  static char bin[64]; 
+  unsigned int i=0;
+
+  while (Dec > 0) {
+    bin[32+i++] = ((Dec & 1) > 0) ? '1' : '0';
+    Dec = Dec >> 1;
+  }
+
+  for (unsigned int j = 0; j< bitLength; j++) {
+    if (j >= bitLength - i) {
+      bin[j] = bin[ 31 + i - (j - (bitLength - i)) ];
+    } else {
+      bin[j] = '0';
+    }
+  }
+  bin[bitLength] = '\0';
+  
+  return bin;
+}

include/pins.h

@@ -0,0 +1,12 @@
+#pragma once
+
+#if defined(ESP8266)
+#define SEND_PIN 14
+#define RECEIVE_PIN 12
+#define RED_LED LED_BUILTIN
+#define BLUE_LED 2
+#else
+#define RESET_PIN 10
+#define SEND_PIN 11
+#define RECEIVE_PIN 2
+#endif

include/pro-mini.h

@@ -0,0 +1,32 @@
+#include "output.h"
+
+namespace Board {
+	
+	void setup() {
+		digitalWrite(RESET_PIN, HIGH);
+		pinMode(RESET_PIN, OUTPUT);
+	}
+
+	void readCommand() {
+		if (serialReader.readLine(Serial) > 0) {
+			char* cmd = serialReader.getBuffer();
+			if (strcmp("reset", cmd) == 0) {
+				Serial.println("resetting...");
+				delay(1200);
+				digitalWrite(RESET_PIN, LOW);
+				Serial.println("resetting failed");
+			}
+			runJsonCommand(cmd);
+		}
+	}
+
+	void loop() {
+		readCommand();
+	}
+
+	void publishResponse(JsonDocument& jsonDoc) {
+	}
+
+	void handleJsonError(JsonDocument& jsonError) {
+	}
+}

include/rc_devices.h

@@ -0,0 +1,95 @@
+#pragma once
+
+#define MAIN_DEVICE_ID "rc-gateway"
+#define BATTERY_PERCENTAGE_TEMPLATE(min, diff) "{% if value_json.sensor.diagnostic.voltage|is_number %}\
+ {{ ((value_json.sensor.diagnostic.voltage|float-" #min ")|round(2)*100/" #diff ")|int }}\
+ {% endif %}"
+
+#include "esp.h"
+#include "ha.h"
+
+using namespace Ha;
+
+typedef unordered_multimap<uint32_t, Ha::Switch*> mapswitches;
+
+mapswitches onSwitches;
+mapswitches offSwitches;
+unordered_map<string, Ha::Switch*> p1Switches;
+
+auto gatewayDevice = &DeviceConfig::create(MAIN_DEVICE_ID).withName("RC Gateway").withManufacturer("Adafruit").withModel("Huzzah Esp8266");
+
+struct PollinSwitch : Switch {
+    constexpr static const char* man = "Pollin";
+    const char* group;
+    uint8_t channel;
+
+    PollinSwitch(const char* group, const uint8_t channel, const char* name = nullptr, const char* area = nullptr)
+        : Switch(nullptr, [group, channel]{
+                // copy id from string into a new pointer, to avoid memory leaks
+                return (new string{Protocol_1::buildId(group, channel)})->c_str();
+            }()), group(group), channel(channel) {          // cppcheck-suppress [selfInitialization]
+        if (!name) name = (new string{string(man).append(" ").append(id)})->c_str();
+        entityId = [this]() {
+            auto eId = string{man};
+            transform(eId.begin(), eId.end(), eId.begin(), ::tolower);
+            return (new string{eId.append("_").append(id)})->c_str();
+        }();
+        mainDevice = &DeviceConfig::create(id).withName(name).withManufacturer(man).withArea(area).withParent(gatewayDevice);
+        withStateTopic();
+        deviceClass = "outlet";
+        p1Switches.insert({ string(id), this });
+    }
+
+    void onCommand(const char* msg) override {
+        strcmp("ON", msg) == 0 ? mySwitch.switchOn(group, channel) : mySwitch.switchOff(group, channel);
+        publisher(State::topic, msg);
+    }
+
+};
+
+struct EasyHomeSwitch : Switch {
+    constexpr static const array<uint32_t, 4> onAll  = { 4326554, 4537114, 4767530, 4972714 };
+    constexpr static const array<uint32_t, 4> offAll = { 4483146, 4626810, 4661562, 4819642 };
+    array<uint32_t, 4> onButton;
+    array<uint32_t, 4> offButton;
+
+    EasyHomeSwitch(const char remotePosition, array<uint32_t, 4> on, array<uint32_t, 4> off, const char* name = nullptr, const char* area = nullptr)
+        : Switch(nullptr, [remotePosition] {
+            auto uId = new string("easy_home_");
+            (*uId) += tolower(remotePosition);
+            return uId->c_str();
+        }()), onButton(on), offButton(off) {
+        if (!name) {
+            auto n = new string("Easy Home ");
+            (*n) += remotePosition;
+            name = n->c_str();
+        }
+        entityId = id;
+        mainDevice = &DeviceConfig::create(id).withName(name).withManufacturer("Intertek").withModel("Easy Home").withArea(area).withParent(gatewayDevice);
+        withStateTopic();
+        deviceClass = "outlet";
+        for (int i = 0; i < 4; i++) {
+            onSwitches.insert({ onAll[i], this });
+            onSwitches.insert({ onButton[i], this });
+            offSwitches.insert({ offAll[i], this });
+            offSwitches.insert({ offButton[i], this });
+        }
+    }
+
+    void onCommand(const char* msg) override {
+        mySwitch.setProtocol(4);
+        strcmp("ON", msg) == 0 ? mySwitch.send(onButton[0], 24) : mySwitch.send(offButton[0], 24);
+        publisher(State::topic, msg);
+    }
+};
+
+template <class T>
+auto batterySensors(const char* id, const char* batterySensorTemplate) {
+    return [id, batterySensorTemplate](Builder<T>& builder) -> Builder<T>& {
+        builder
+            .addDiagnostic(new VoltageSensor{id, "Battery voltage", "{{ value_json.sensor.diagnostic.voltage }}"})
+            .addDiagnostic(new BatterySensor{id, "Battery level", batterySensorTemplate})
+            .build();
+        return builder;
+    };
+}

lib/IRremote_Tiny/.gitignore

@@ -0,0 +1,3 @@
+*.un~
+*.sublime-project
+*.sublime-workspace

lib/IRremote_Tiny/.travis.yml

@@ -0,0 +1,22 @@
+language: python
+python:
+    - "2.7"
+
+env:
+    - PLATFORMIO_CI_SRC=examples/AiwaRCT501SendDemo PLATFORMIO_BUILD_FLAGS="-DSEND_AIWA_RC_T501"
+    - PLATFORMIO_CI_SRC=examples/IRrecord PLATFORMIO_BUILD_FLAGS="-DSEND_NEC -DSEND_SONY -DSEND_RC5 -DSEND_RC6"
+    - PLATFORMIO_CI_SRC=examples/IRrecvDemo
+    - PLATFORMIO_CI_SRC=examples/IRrecvDump
+    - PLATFORMIO_CI_SRC=examples/IRrecvDumpV2
+    - PLATFORMIO_CI_SRC=examples/IRrelay
+    - PLATFORMIO_CI_SRC=examples/IRsendDemo PLATFORMIO_BUILD_FLAGS="-DSEND_SONY"
+    - PLATFORMIO_CI_SRC=examples/IRtest PLATFORMIO_BUILD_FLAGS="-DSEND_NEC -DSEND_SONY -DSEND_RC5 -DSEND_RC6"
+    - PLATFORMIO_CI_SRC=examples/IRtest2 PLATFORMIO_BUILD_FLAGS="-DSEND_NEC -DSEND_SONY -DSEND_RC5 -DSEND_RC6"
+    - PLATFORMIO_CI_SRC=examples/JVCPanasonicSendDemo PLATFORMIO_BUILD_FLAGS="-DSEND_JVC -DSEND_PANASONIC"
+    - PLATFORMIO_CI_SRC=examples/IRremoteInfo 
+
+install:
+    - python -c "$(curl -fsSL https://raw.githubusercontent.com/platformio/platformio/master/scripts/get-platformio.py)"
+
+script:
+    - platformio ci --lib="." --board=uno --board=leonardo --board=pro16MHzatmega168

lib/IRremote_Tiny/Contributors.md

@@ -0,0 +1,21 @@
+## Contributors
+These are the active contributors of this project that you may contact if there is anything you need help with or if you have suggestions. 
+
+- [z3t0](https://github.com/z3t0) : Active Contributor and currently also the main contributor.
+  * Email: zetoslab@gmail.com
+  * Skype: polarised16
+- [shirriff](https://github.com/shirriff) : An amazing person who worked to create this awesome library and provide unending support
+- [Informatic](https://github.com/Informatic) : Active contributor
+- [fmeschia](https://github.com/fmeschia) : Active contributor
+- [PaulStoffregen](https://github.com/paulstroffregen) : Active contributor
+- [crash7](https://github.com/crash7) : Active contributor
+- [Neco777](https://github.com/neco777) : Active contributor
+- [Lauszus](https://github.com/lauszus) : Active contributor
+- [csBlueChip](https://github.com/csbluechip) : Active contributor, who contributed major and vital changes to the code base.
+- [Sebazzz](https://github.com/sebazz): Contributor
+- [lumbric](https://github.com/lumbric): Contributor
+- [ElectricRCAircraftGuy](https://github.com/electricrcaircraftguy): Active Contributor
+
+Note: This list is being updated constantly so please let [z3t0](https://github.com/z3t0) know if you have been missed.
+
+

lib/IRremote_Tiny/IRremote.cpp

@@ -0,0 +1,193 @@
+//******************************************************************************
+// IRremote
+// Version 2.0.1 June, 2015
+// Copyright 2009 Ken Shirriff
+// For details, see http://arcfn.com/2009/08/multi-protocol-infrared-remote-library.html
+//
+// Modified by Paul Stoffregen <paul@pjrc.com> to support other boards and timers
+// Modified  by Mitra Ardron <mitra@mitra.biz>
+// Added Sanyo and Mitsubishi controllers
+// Modified Sony to spot the repeat codes that some Sony's send
+//
+// Interrupt code based on NECIRrcv by Joe Knapp
+// http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1210243556
+// Also influenced by http://zovirl.com/2008/11/12/building-a-universal-remote-with-an-arduino/
+//
+// JVC and Panasonic protocol added by Kristian Lauszus (Thanks to zenwheel and other people at the original blog post)
+// LG added by Darryl Smith (based on the JVC protocol)
+// Whynter A/C ARC-110WD added by Francesco Meschia
+//******************************************************************************
+
+#include <avr/interrupt.h>
+
+// Defining IR_GLOBAL here allows us to declare the instantiation of global variables
+#define IR_GLOBAL
+#	include "IRremote.h"
+#	include "IRremoteInt.h"
+#undef IR_GLOBAL
+
+//+=============================================================================
+// The match functions were (apparently) originally MACROs to improve code speed
+//   (although this would have bloated the code) hence the names being CAPS
+// A later release implemented debug output and so they needed to be converted
+//   to functions.
+// I tried to implement a dual-compile mode (DEBUG/non-DEBUG) but for some
+//   reason, no matter what I did I could not get them to function as macros again.
+// I have found a *lot* of bugs in the Arduino compiler over the last few weeks,
+//   and I am currently assuming that one of these bugs is my problem.
+// I may revisit this code at a later date and look at the assembler produced
+//   in a hope of finding out what is going on, but for now they will remain as
+//   functions even in non-DEBUG mode
+//
+int  MATCH (int measured,  int desired)
+{
+ 	DBG_PRINT(F("Testing: "));
+ 	DBG_PRINT(TICKS_LOW(desired), DEC);
+ 	DBG_PRINT(F(" <= "));
+ 	DBG_PRINT(measured, DEC);
+ 	DBG_PRINT(F(" <= "));
+ 	DBG_PRINT(TICKS_HIGH(desired), DEC);
+
+  bool passed = ((measured >= TICKS_LOW(desired)) && (measured <= TICKS_HIGH(desired)));
+  if (passed)
+    DBG_PRINTLN(F("?; passed"));
+  else
+    DBG_PRINTLN(F("?; FAILED")); 
+ 	return passed;
+}
+
+//+========================================================
+// Due to sensor lag, when received, Marks tend to be 100us too long
+//
+int  MATCH_MARK (int measured_ticks,  int desired_us)
+{
+	DBG_PRINT(F("Testing mark (actual vs desired): "));
+	DBG_PRINT(measured_ticks * USECPERTICK, DEC);
+	DBG_PRINT(F("us vs "));
+	DBG_PRINT(desired_us, DEC);
+	DBG_PRINT("us"); 
+	DBG_PRINT(": ");
+	DBG_PRINT(TICKS_LOW(desired_us + MARK_EXCESS) * USECPERTICK, DEC);
+	DBG_PRINT(F(" <= "));
+	DBG_PRINT(measured_ticks * USECPERTICK, DEC);
+	DBG_PRINT(F(" <= "));
+	DBG_PRINT(TICKS_HIGH(desired_us + MARK_EXCESS) * USECPERTICK, DEC);
+
+  bool passed = ((measured_ticks >= TICKS_LOW (desired_us + MARK_EXCESS))
+                && (measured_ticks <= TICKS_HIGH(desired_us + MARK_EXCESS)));
+  if (passed)
+    DBG_PRINTLN(F("?; passed"));
+  else
+    DBG_PRINTLN(F("?; FAILED")); 
+ 	return passed;
+}
+
+//+========================================================
+// Due to sensor lag, when received, Spaces tend to be 100us too short
+//
+int  MATCH_SPACE (int measured_ticks,  int desired_us)
+{
+	DBG_PRINT(F("Testing space (actual vs desired): "));
+	DBG_PRINT(measured_ticks * USECPERTICK, DEC);
+	DBG_PRINT(F("us vs "));
+	DBG_PRINT(desired_us, DEC);
+	DBG_PRINT("us"); 
+	DBG_PRINT(": ");
+	DBG_PRINT(TICKS_LOW(desired_us - MARK_EXCESS) * USECPERTICK, DEC);
+	DBG_PRINT(F(" <= "));
+	DBG_PRINT(measured_ticks * USECPERTICK, DEC);
+	DBG_PRINT(F(" <= "));
+	DBG_PRINT(TICKS_HIGH(desired_us - MARK_EXCESS) * USECPERTICK, DEC);
+
+  bool passed = ((measured_ticks >= TICKS_LOW (desired_us - MARK_EXCESS))
+                && (measured_ticks <= TICKS_HIGH(desired_us - MARK_EXCESS)));
+  if (passed)
+    DBG_PRINTLN(F("?; passed"));
+  else
+    DBG_PRINTLN(F("?; FAILED")); 
+ 	return passed;
+}
+
+//+=============================================================================
+// Interrupt Service Routine - Fires every 50uS
+// TIMER2 interrupt code to collect raw data.
+// Widths of alternating SPACE, MARK are recorded in rawbuf.
+// Recorded in ticks of 50uS [microseconds, 0.000050 seconds]
+// 'rawlen' counts the number of entries recorded so far.
+// First entry is the SPACE between transmissions.
+// As soon as a the first [SPACE] entry gets long:
+//   Ready is set; State switches to IDLE; Timing of SPACE continues.
+// As soon as first MARK arrives:
+//   Gap width is recorded; Ready is cleared; New logging starts
+//
+ISR (TIMER_INTR_NAME)
+{
+	TIMER_RESET;
+
+	// Read if IR Receiver -> SPACE [xmt LED off] or a MARK [xmt LED on]
+	// digitalRead() is very slow. Optimisation is possible, but makes the code unportable
+	uint8_t  irdata = (uint8_t)digitalRead(irparams.recvpin);
+
+	irparams.timer++;  // One more 50uS tick
+	if (irparams.rawlen >= RAWBUF)  irparams.rcvstate = STATE_OVERFLOW ;  // Buffer overflow
+
+	switch(irparams.rcvstate) {
+		//......................................................................
+		case STATE_IDLE: // In the middle of a gap
+			if (irdata == MARK) {
+				if (irparams.timer < GAP_TICKS)  {  // Not big enough to be a gap.
+					irparams.timer = 0;
+
+				} else {
+					// Gap just ended; Record duration; Start recording transmission
+					irparams.overflow                  = false;
+					irparams.rawlen                    = 0;
+					irparams.rawbuf[irparams.rawlen++] = irparams.timer;
+					irparams.timer                     = 0;
+					irparams.rcvstate                  = STATE_MARK;
+				}
+			}
+			break;
+		//......................................................................
+		case STATE_MARK:  // Timing Mark
+			if (irdata == SPACE) {   // Mark ended; Record time
+				irparams.rawbuf[irparams.rawlen++] = irparams.timer;
+				irparams.timer                     = 0;
+				irparams.rcvstate                  = STATE_SPACE;
+			}
+			break;
+		//......................................................................
+		case STATE_SPACE:  // Timing Space
+			if (irdata == MARK) {  // Space just ended; Record time
+				irparams.rawbuf[irparams.rawlen++] = irparams.timer;
+				irparams.timer                     = 0;
+				irparams.rcvstate                  = STATE_MARK;
+
+			} else if (irparams.timer > GAP_TICKS) {  // Space
+					// A long Space, indicates gap between codes
+					// Flag the current code as ready for processing
+					// Switch to STOP
+					// Don't reset timer; keep counting Space width
+					irparams.rcvstate = STATE_STOP;
+			}
+			break;
+		//......................................................................
+		case STATE_STOP:  // Waiting; Measuring Gap
+		 	if (irdata == MARK)  irparams.timer = 0 ;  // Reset gap timer
+		 	break;
+		//......................................................................
+		case STATE_OVERFLOW:  // Flag up a read overflow; Stop the State Machine
+			irparams.overflow = true;
+			irparams.rcvstate = STATE_STOP;
+		 	break;
+	}
+
+	// If requested, flash LED while receiving IR data
+	if (irparams.blinkflag) {
+		if (irdata == MARK)
+			if (irparams.blinkpin) digitalWrite(irparams.blinkpin, HIGH); // Turn user defined pin LED on
+				else BLINKLED_ON() ;   // if no user defined LED pin, turn default LED pin for the hardware on
+		else if (irparams.blinkpin) digitalWrite(irparams.blinkpin, LOW); // Turn user defined pin LED on
+				else BLINKLED_OFF() ;   // if no user defined LED pin, turn default LED pin for the hardware on
+	}
+}

lib/IRremote_Tiny/IRremote.h

@@ -0,0 +1,332 @@
+
+//******************************************************************************
+// IRremote
+// Version 2.0.1 June, 2015
+// Copyright 2009 Ken Shirriff
+// For details, see http://arcfn.com/2009/08/multi-protocol-infrared-remote-library.html
+// Edited by Mitra to add new controller SANYO
+//
+// Interrupt code based on NECIRrcv by Joe Knapp
+// http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1210243556
+// Also influenced by http://zovirl.com/2008/11/12/building-a-universal-remote-with-an-arduino/
+//
+// JVC and Panasonic protocol added by Kristian Lauszus (Thanks to zenwheel and other people at the original blog post)
+// LG added by Darryl Smith (based on the JVC protocol)
+// Whynter A/C ARC-110WD added by Francesco Meschia
+//******************************************************************************
+
+#ifndef IRremote_h
+#define IRremote_h
+
+//------------------------------------------------------------------------------
+// The ISR header contains several useful macros the user may wish to use
+//
+#include "IRremoteInt.h"
+
+//------------------------------------------------------------------------------
+// Supported IR protocols
+// Each protocol you include costs memory and, during decode, costs time
+// Disable (set to 0) all the protocols you do not need/want!
+//
+#define DECODE_RC5           1
+#define SEND_RC5             1
+
+#define DECODE_RC6           1
+#define SEND_RC6             1
+
+#define DECODE_NEC           1
+#define SEND_NEC             1
+
+#define DECODE_SONY          1
+#define SEND_SONY            1
+
+#define DECODE_PANASONIC     1
+#define SEND_PANASONIC       1
+
+#define DECODE_JVC           1
+#define SEND_JVC             1
+
+#define DECODE_SAMSUNG       1
+#define SEND_SAMSUNG         1
+
+#define DECODE_WHYNTER       1
+#define SEND_WHYNTER         1
+
+#define DECODE_AIWA_RC_T501  1
+#define SEND_AIWA_RC_T501    1
+
+#define DECODE_LG            1
+#define SEND_LG              1 
+
+#define DECODE_SANYO         1
+#define SEND_SANYO           0 // NOT WRITTEN
+
+#define DECODE_MITSUBISHI    1
+#define SEND_MITSUBISHI      0 // NOT WRITTEN
+
+#define DECODE_DISH          0 // NOT WRITTEN
+#define SEND_DISH            1
+
+#define DECODE_SHARP         0 // NOT WRITTEN
+#define SEND_SHARP           1
+
+#define DECODE_DENON         1
+#define SEND_DENON           1
+
+#define DECODE_PRONTO        0 // This function doe not logically make sense
+#define SEND_PRONTO          1
+
+//------------------------------------------------------------------------------
+// When sending a Pronto code we request to send either the "once" code
+//                                                   or the "repeat" code
+// If the code requested does not exist we can request to fallback on the
+// other code (the one we did not explicitly request)
+//
+// I would suggest that "fallback" will be the standard calling method
+// The last paragraph on this page discusses the rationale of this idea:
+//   http://www.remotecentral.com/features/irdisp2.htm
+//
+#define PRONTO_ONCE        false
+#define PRONTO_REPEAT      true
+#define PRONTO_FALLBACK    true
+#define PRONTO_NOFALLBACK  false
+
+//------------------------------------------------------------------------------
+// An enumerated list of all supported formats
+// You do NOT need to remove entries from this list when disabling protocols!
+//
+typedef
+	enum {
+		UNKNOWN      = -1,
+		UNUSED       =  0,
+		RC5,
+		RC6,
+		NEC,
+		SONY,
+		PANASONIC,
+		JVC,
+		SAMSUNG,
+		WHYNTER,
+		AIWA_RC_T501,
+		LG,
+		SANYO,
+		MITSUBISHI,
+		DISH,
+		SHARP,
+		DENON,
+		PRONTO,
+	}
+decode_type_t;
+
+//------------------------------------------------------------------------------
+// Set DEBUG to 1 for lots of lovely debug output
+//
+#define DEBUG  0
+
+//------------------------------------------------------------------------------
+// Debug directives
+//
+#if DEBUG
+#	define DBG_PRINT(...)    Serial.print(__VA_ARGS__)
+#	define DBG_PRINTLN(...)  Serial.println(__VA_ARGS__)
+#else
+#	define DBG_PRINT(...)
+#	define DBG_PRINTLN(...)
+#endif
+
+//------------------------------------------------------------------------------
+// Mark & Space matching functions
+//
+int  MATCH       (int measured, int desired) ;
+int  MATCH_MARK  (int measured_ticks, int desired_us) ;
+int  MATCH_SPACE (int measured_ticks, int desired_us) ;
+
+//------------------------------------------------------------------------------
+// Results returned from the decoder
+//
+class decode_results
+{
+	public:
+		decode_type_t          decode_type;  // UNKNOWN, NEC, SONY, RC5, ...
+		unsigned int           address;      // Used by Panasonic & Sharp [16-bits]
+		unsigned long          value;        // Decoded value [max 32-bits]
+		int                    bits;         // Number of bits in decoded value
+		volatile unsigned int  *rawbuf;      // Raw intervals in 50uS ticks
+		int                    rawlen;       // Number of records in rawbuf
+		int                    overflow;     // true iff IR raw code too long
+};
+
+//------------------------------------------------------------------------------
+// Decoded value for NEC when a repeat code is received
+//
+#define REPEAT 0xFFFFFFFF
+
+//------------------------------------------------------------------------------
+// Main class for receiving IR
+//
+class IRrecv
+{
+	public:
+		IRrecv (int recvpin) ;
+		IRrecv (int recvpin, int blinkpin);
+
+		void  blink13    (int blinkflag) ;
+		int   decode     (decode_results *results) ;
+		void  enableIRIn ( ) ;
+		bool  isIdle     ( ) ;
+		void  resume     ( ) ;
+
+	private:
+		long  decodeHash (decode_results *results) ;
+		int   compare    (unsigned int oldval, unsigned int newval) ;
+
+		//......................................................................
+#		if (DECODE_RC5 || DECODE_RC6)
+			// This helper function is shared by RC5 and RC6
+			int  getRClevel (decode_results *results,  int *offset,  int *used,  int t1) ;
+#		endif
+#		if DECODE_RC5
+			bool  decodeRC5        (decode_results *results) ;
+#		endif
+#		if DECODE_RC6
+			bool  decodeRC6        (decode_results *results) ;
+#		endif
+		//......................................................................
+#		if DECODE_NEC
+			bool  decodeNEC        (decode_results *results) ;
+#		endif
+		//......................................................................
+#		if DECODE_SONY
+			bool  decodeSony       (decode_results *results) ;
+#		endif
+		//......................................................................
+#		if DECODE_PANASONIC
+			bool  decodePanasonic  (decode_results *results) ;
+#		endif
+		//......................................................................
+#		if DECODE_JVC
+			bool  decodeJVC        (decode_results *results) ;
+#		endif
+		//......................................................................
+#		if DECODE_SAMSUNG
+			bool  decodeSAMSUNG    (decode_results *results) ;
+#		endif
+		//......................................................................
+#		if DECODE_WHYNTER
+			bool  decodeWhynter    (decode_results *results) ;
+#		endif
+		//......................................................................
+#		if DECODE_AIWA_RC_T501
+			bool  decodeAiwaRCT501 (decode_results *results) ;
+#		endif
+		//......................................................................
+#		if DECODE_LG
+			bool  decodeLG         (decode_results *results) ;
+#		endif
+		//......................................................................
+#		if DECODE_SANYO
+			bool  decodeSanyo      (decode_results *results) ;
+#		endif
+		//......................................................................
+#		if DECODE_MITSUBISHI
+			bool  decodeMitsubishi (decode_results *results) ;
+#		endif
+		//......................................................................
+#		if DECODE_DISH
+			bool  decodeDish (decode_results *results) ; // NOT WRITTEN
+#		endif
+		//......................................................................
+#		if DECODE_SHARP
+			bool  decodeSharp (decode_results *results) ; // NOT WRITTEN
+#		endif
+		//......................................................................
+#		if DECODE_DENON
+			bool  decodeDenon (decode_results *results) ;
+#		endif
+} ;
+
+//------------------------------------------------------------------------------
+// Main class for sending IR
+//
+class IRsend
+{
+	public:
+		IRsend () { }
+
+		void  custom_delay_usec (unsigned long uSecs);
+		void  enableIROut 		(int khz) ;
+		void  mark        		(unsigned int usec) ;
+		void  space       		(unsigned int usec) ;
+		void  sendRaw     		(const unsigned int buf[],  unsigned int len,  unsigned int hz) ;
+
+		//......................................................................
+#		if SEND_RC5
+			void  sendRC5        (unsigned long data,  int nbits) ;
+#		endif
+#		if SEND_RC6
+			void  sendRC6        (unsigned long data,  int nbits) ;
+#		endif
+		//......................................................................
+#		if SEND_NEC
+			void  sendNEC        (unsigned long data,  int nbits) ;
+#		endif
+		//......................................................................
+#		if SEND_SONY
+			void  sendSony       (unsigned long data,  int nbits) ;
+#		endif
+		//......................................................................
+#		if SEND_PANASONIC
+			void  sendPanasonic  (unsigned int address,  unsigned long data) ;
+#		endif
+		//......................................................................
+#		if SEND_JVC
+			// JVC does NOT repeat by sending a separate code (like NEC does).
+			// The JVC protocol repeats by skipping the header.
+			// To send a JVC repeat signal, send the original code value
+			//   and set 'repeat' to true
+			void  sendJVC        (unsigned long data,  int nbits,  bool repeat) ;
+#		endif
+		//......................................................................
+#		if SEND_SAMSUNG
+			void  sendSAMSUNG    (unsigned long data,  int nbits) ;
+#		endif
+		//......................................................................
+#		if SEND_WHYNTER
+			void  sendWhynter    (unsigned long data,  int nbits) ;
+#		endif
+		//......................................................................
+#		if SEND_AIWA_RC_T501
+			void  sendAiwaRCT501 (int code) ;
+#		endif
+		//......................................................................
+#		if SEND_LG
+			void  sendLG         (unsigned long data,  int nbits) ;
+#		endif
+		//......................................................................
+#		if SEND_SANYO
+			void  sendSanyo      ( ) ; // NOT WRITTEN
+#		endif
+		//......................................................................
+#		if SEND_MISUBISHI
+			void  sendMitsubishi ( ) ; // NOT WRITTEN
+#		endif
+		//......................................................................
+#		if SEND_DISH
+			void  sendDISH       (unsigned long data,  int nbits) ;
+#		endif
+		//......................................................................
+#		if SEND_SHARP
+			void  sendSharpRaw   (unsigned long data,  int nbits) ;
+			void  sendSharp      (unsigned int address,  unsigned int command) ;
+#		endif
+		//......................................................................
+#		if SEND_DENON
+			void  sendDenon      (unsigned long data,  int nbits) ;
+#		endif
+		//......................................................................
+#		if SEND_PRONTO
+			void  sendPronto     (char* code,  bool repeat,  bool fallback) ;
+#		endif
+} ;
+
+#endif

lib/IRremote_Tiny/IRremoteInt.h

@@ -0,0 +1,602 @@
+//******************************************************************************
+// IRremote
+// Version 2.0.1 June, 2015
+// Copyright 2009 Ken Shirriff
+// For details, see http://arcfn.com/2009/08/multi-protocol-infrared-remote-library.html
+//
+// Modified by Paul Stoffregen <paul@pjrc.com> to support other boards and timers
+//
+// Interrupt code based on NECIRrcv by Joe Knapp
+// http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1210243556
+// Also influenced by http://zovirl.com/2008/11/12/building-a-universal-remote-with-an-arduino/
+//
+// JVC and Panasonic protocol added by Kristian Lauszus (Thanks to zenwheel and other people at the original blog post)
+// Whynter A/C ARC-110WD added by Francesco Meschia
+//******************************************************************************
+
+#ifndef IRremoteint_h
+#define IRremoteint_h
+
+//------------------------------------------------------------------------------
+// Include the right Arduino header
+//
+#if defined(ARDUINO) && (ARDUINO >= 100)
+#	include <Arduino.h>
+#else
+#	if !defined(IRPRONTO)
+#		include <WProgram.h>
+#	endif
+#endif
+
+//------------------------------------------------------------------------------
+// This handles definition and access to global variables
+//
+#ifdef IR_GLOBAL
+#	define EXTERN
+#else
+#	define EXTERN extern
+#endif
+
+//------------------------------------------------------------------------------
+// Information for the Interrupt Service Routine
+//
+#define RAWBUF  101  // Maximum length of raw duration buffer
+
+typedef
+	struct {
+		// The fields are ordered to reduce memory over caused by struct-padding
+		uint8_t       rcvstate;        // State Machine state
+		uint8_t       recvpin;         // Pin connected to IR data from detector
+		uint8_t       blinkpin;
+		uint8_t       blinkflag;       // true -> enable blinking of pin on IR processing
+		uint8_t       rawlen;          // counter of entries in rawbuf
+		unsigned int  timer;           // State timer, counts 50uS ticks.
+		unsigned int  rawbuf[RAWBUF];  // raw data
+		uint8_t       overflow;        // Raw buffer overflow occurred
+	}
+irparams_t;
+
+// ISR State-Machine : Receiver States
+#define STATE_IDLE      2
+#define STATE_MARK      3
+#define STATE_SPACE     4
+#define STATE_STOP      5
+#define STATE_OVERFLOW  6
+
+// Allow all parts of the code access to the ISR data
+// NB. The data can be changed by the ISR at any time, even mid-function
+// Therefore we declare it as "volatile" to stop the compiler/CPU caching it
+EXTERN  volatile irparams_t  irparams;
+
+//------------------------------------------------------------------------------
+// Defines for blinking the LED
+//
+
+#if defined(CORE_LED0_PIN)
+#	define BLINKLED        CORE_LED0_PIN
+#	define BLINKLED_ON()   (digitalWrite(CORE_LED0_PIN, HIGH))
+#	define BLINKLED_OFF()  (digitalWrite(CORE_LED0_PIN, LOW))
+
+#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+#	define BLINKLED        13
+#	define BLINKLED_ON()   (PORTB |= B10000000)
+#	define BLINKLED_OFF()  (PORTB &= B01111111)
+
+#elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644__)
+#	define BLINKLED        0
+#	define BLINKLED_ON()   (PORTD |= B00000001)
+#	define BLINKLED_OFF()  (PORTD &= B11111110)
+
+#else
+#	define BLINKLED        13
+	#define BLINKLED_ON()  (PORTB |= B00100000)
+#	define BLINKLED_OFF()  (PORTB &= B11011111)
+#endif
+
+//------------------------------------------------------------------------------
+// CPU Frequency
+//
+#ifdef F_CPU
+#	define SYSCLOCK  F_CPU     // main Arduino clock
+#else
+#	define SYSCLOCK  16000000  // main Arduino clock
+#endif
+
+//------------------------------------------------------------------------------
+// Defines for setting and clearing register bits
+//
+#ifndef cbi
+#	define cbi(sfr, bit)  (_SFR_BYTE(sfr) &= ~_BV(bit))
+#endif
+
+#ifndef sbi
+#	define sbi(sfr, bit)  (_SFR_BYTE(sfr) |= _BV(bit))
+#endif
+
+//------------------------------------------------------------------------------
+// Pulse parms are ((X*50)-100) for the Mark and ((X*50)+100) for the Space.
+// First MARK is the one after the long gap
+// Pulse parameters in uSec
+//
+
+// Due to sensor lag, when received, Marks  tend to be 100us too long and
+//                                   Spaces tend to be 100us too short
+#define MARK_EXCESS    100
+
+// microseconds per clock interrupt tick
+#define USECPERTICK    50
+
+// Upper and Lower percentage tolerances in measurements
+#define TOLERANCE       25
+#define LTOL            (1.0 - (TOLERANCE/100.))
+#define UTOL            (1.0 + (TOLERANCE/100.))
+
+// Minimum gap between IR transmissions
+#define _GAP            5000
+#define GAP_TICKS       (_GAP/USECPERTICK)
+
+#define TICKS_LOW(us)   ((int)(((us)*LTOL/USECPERTICK)))
+#define TICKS_HIGH(us)  ((int)(((us)*UTOL/USECPERTICK + 1)))
+
+//------------------------------------------------------------------------------
+// IR detector output is active low
+//
+#define MARK   0
+#define SPACE  1
+
+//------------------------------------------------------------------------------
+// Define which timer to use
+//
+// Uncomment the timer you wish to use on your board.
+// If you are using another library which uses timer2, you have options to
+//   switch IRremote to use a different timer.
+//
+
+// Arduino Mega
+#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+	//#define IR_USE_TIMER1   // tx = pin 11
+	#define IR_USE_TIMER2     // tx = pin 9
+	//#define IR_USE_TIMER3   // tx = pin 5
+	//#define IR_USE_TIMER4   // tx = pin 6
+	//#define IR_USE_TIMER5   // tx = pin 46
+
+// Teensy 1.0
+#elif defined(__AVR_AT90USB162__)
+	#define IR_USE_TIMER1     // tx = pin 17
+
+// Teensy 2.0
+#elif defined(__AVR_ATmega32U4__)
+	//#define IR_USE_TIMER1   // tx = pin 14
+	//#define IR_USE_TIMER3   // tx = pin 9
+	#define IR_USE_TIMER4_HS  // tx = pin 10
+
+// Teensy 3.0 / Teensy 3.1
+#elif defined(__MK20DX128__) || defined(__MK20DX256__)
+	#define IR_USE_TIMER_CMT  // tx = pin 5
+
+// Teensy-LC
+#elif defined(__MKL26Z64__)
+  #define IR_USE_TIMER_TPM1 // tx = pin 16
+
+// Teensy++ 1.0 & 2.0
+#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
+	//#define IR_USE_TIMER1   // tx = pin 25
+	#define IR_USE_TIMER2     // tx = pin 1
+	//#define IR_USE_TIMER3   // tx = pin 16
+
+// Sanguino
+#elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644__)
+	//#define IR_USE_TIMER1   // tx = pin 13
+	#define IR_USE_TIMER2     // tx = pin 14
+
+// Atmega8
+#elif defined(__AVR_ATmega8P__) || defined(__AVR_ATmega8__)
+	#define IR_USE_TIMER1     // tx = pin 9
+
+// ATtiny84
+#elif defined(__AVR_ATtiny84__)
+  #define IR_USE_TIMER1     // tx = pin 6
+
+//ATtiny85
+#elif defined(__AVR_ATtiny85__)
+  #define IR_USE_TIMER_TINY0   // tx = pin 1
+
+// Arduino Duemilanove, Diecimila, LilyPad, Mini, Fio, Nano, etc
+#else
+	//#define IR_USE_TIMER1   // tx = pin 9
+	#define IR_USE_TIMER2     // tx = pin 3
+
+#endif
+
+//------------------------------------------------------------------------------
+// Defines for Timer
+
+//---------------------------------------------------------
+// Timer2 (8 bits)
+//
+#if defined(IR_USE_TIMER2)
+
+#define TIMER_RESET
+#define TIMER_ENABLE_PWM    (TCCR2A |= _BV(COM2B1))
+#define TIMER_DISABLE_PWM   (TCCR2A &= ~(_BV(COM2B1)))
+#define TIMER_ENABLE_INTR   (TIMSK2 = _BV(OCIE2A))
+#define TIMER_DISABLE_INTR  (TIMSK2 = 0)
+#define TIMER_INTR_NAME     TIMER2_COMPA_vect
+
+#define TIMER_CONFIG_KHZ(val) ({ \
+	const uint8_t pwmval = SYSCLOCK / 2000 / (val); \
+	TCCR2A               = _BV(WGM20); \
+	TCCR2B               = _BV(WGM22) | _BV(CS20); \
+	OCR2A                = pwmval; \
+	OCR2B                = pwmval / 3; \
+})
+
+#define TIMER_COUNT_TOP  (SYSCLOCK * USECPERTICK / 1000000)
+
+//-----------------
+#if (TIMER_COUNT_TOP < 256)
+#	define TIMER_CONFIG_NORMAL() ({ \
+		TCCR2A = _BV(WGM21); \
+		TCCR2B = _BV(CS20); \
+		OCR2A  = TIMER_COUNT_TOP; \
+		TCNT2  = 0; \
+	})
+#else
+#	define TIMER_CONFIG_NORMAL() ({ \
+		TCCR2A = _BV(WGM21); \
+		TCCR2B = _BV(CS21); \
+		OCR2A  = TIMER_COUNT_TOP / 8; \
+		TCNT2  = 0; \
+	})
+#endif
+
+//-----------------
+#if defined(CORE_OC2B_PIN)
+#	define TIMER_PWM_PIN  CORE_OC2B_PIN  // Teensy
+#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+#	define TIMER_PWM_PIN  9              // Arduino Mega
+#elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644__)
+#	define TIMER_PWM_PIN  14             // Sanguino
+#else
+#	define TIMER_PWM_PIN  3              // Arduino Duemilanove, Diecimila, LilyPad, etc
+#endif
+
+//---------------------------------------------------------
+// Timer1 (16 bits)
+//
+#elif defined(IR_USE_TIMER1)
+
+#define TIMER_RESET
+#define TIMER_ENABLE_PWM   (TCCR1A |= _BV(COM1A1))
+#define TIMER_DISABLE_PWM  (TCCR1A &= ~(_BV(COM1A1)))
+
+//-----------------
+#if defined(__AVR_ATmega8P__) || defined(__AVR_ATmega8__)
+#	define TIMER_ENABLE_INTR   (TIMSK |= _BV(OCIE1A))
+#	define TIMER_DISABLE_INTR  (TIMSK &= ~_BV(OCIE1A))
+#else
+#	define TIMER_ENABLE_INTR   (TIMSK1 = _BV(OCIE1A))
+#	define TIMER_DISABLE_INTR  (TIMSK1 = 0)
+#endif
+
+//-----------------
+#define TIMER_INTR_NAME       TIMER1_COMPA_vect
+
+#define TIMER_CONFIG_KHZ(val) ({ \
+	const uint16_t pwmval = SYSCLOCK / 2000 / (val); \
+	TCCR1A                = _BV(WGM11); \
+	TCCR1B                = _BV(WGM13) | _BV(CS10); \
+	ICR1                  = pwmval; \
+	OCR1A                 = pwmval / 3; \
+})
+
+#define TIMER_CONFIG_NORMAL() ({ \
+	TCCR1A = 0; \
+	TCCR1B = _BV(WGM12) | _BV(CS10); \
+	OCR1A  = SYSCLOCK * USECPERTICK / 1000000; \
+	TCNT1  = 0; \
+})
+
+//-----------------
+#if defined(CORE_OC1A_PIN)
+#	define TIMER_PWM_PIN  CORE_OC1A_PIN  // Teensy
+#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+#	define TIMER_PWM_PIN  11             // Arduino Mega
+#elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644__)
+#	define TIMER_PWM_PIN  13             // Sanguino
+#elif defined(__AVR_ATtiny84__)
+# define TIMER_PWM_PIN  6
+#else
+#	define TIMER_PWM_PIN  9              // Arduino Duemilanove, Diecimila, LilyPad, etc
+#endif
+
+//---------------------------------------------------------
+// Timer3 (16 bits)
+//
+#elif defined(IR_USE_TIMER3)
+
+#define TIMER_RESET
+#define TIMER_ENABLE_PWM     (TCCR3A |= _BV(COM3A1))
+#define TIMER_DISABLE_PWM    (TCCR3A &= ~(_BV(COM3A1)))
+#define TIMER_ENABLE_INTR    (TIMSK3 = _BV(OCIE3A))
+#define TIMER_DISABLE_INTR   (TIMSK3 = 0)
+#define TIMER_INTR_NAME      TIMER3_COMPA_vect
+
+#define TIMER_CONFIG_KHZ(val) ({ \
+  const uint16_t pwmval = SYSCLOCK / 2000 / (val); \
+  TCCR3A = _BV(WGM31); \
+  TCCR3B = _BV(WGM33) | _BV(CS30); \
+  ICR3 = pwmval; \
+  OCR3A = pwmval / 3; \
+})
+
+#define TIMER_CONFIG_NORMAL() ({ \
+  TCCR3A = 0; \
+  TCCR3B = _BV(WGM32) | _BV(CS30); \
+  OCR3A = SYSCLOCK * USECPERTICK / 1000000; \
+  TCNT3 = 0; \
+})
+
+//-----------------
+#if defined(CORE_OC3A_PIN)
+#	define TIMER_PWM_PIN  CORE_OC3A_PIN  // Teensy
+#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+#	define TIMER_PWM_PIN  5              // Arduino Mega
+#else
+#	error "Please add OC3A pin number here\n"
+#endif
+
+//---------------------------------------------------------
+// Timer4 (10 bits, high speed option)
+//
+#elif defined(IR_USE_TIMER4_HS)
+
+#define TIMER_RESET
+#define TIMER_ENABLE_PWM    (TCCR4A |= _BV(COM4A1))
+#define TIMER_DISABLE_PWM   (TCCR4A &= ~(_BV(COM4A1)))
+#define TIMER_ENABLE_INTR   (TIMSK4 = _BV(TOIE4))
+#define TIMER_DISABLE_INTR  (TIMSK4 = 0)
+#define TIMER_INTR_NAME     TIMER4_OVF_vect
+
+#define TIMER_CONFIG_KHZ(val) ({ \
+	const uint16_t pwmval = SYSCLOCK / 2000 / (val); \
+	TCCR4A                = (1<<PWM4A); \
+	TCCR4B                = _BV(CS40); \
+	TCCR4C                = 0; \
+	TCCR4D                = (1<<WGM40); \
+	TCCR4E                = 0; \
+	TC4H                  = pwmval >> 8; \
+	OCR4C                 = pwmval; \
+	TC4H                  = (pwmval / 3) >> 8; \
+	OCR4A                 = (pwmval / 3) & 255; \
+})
+
+#define TIMER_CONFIG_NORMAL() ({ \
+	TCCR4A = 0; \
+	TCCR4B = _BV(CS40); \
+	TCCR4C = 0; \
+	TCCR4D = 0; \
+	TCCR4E = 0; \
+	TC4H   = (SYSCLOCK * USECPERTICK / 1000000) >> 8; \
+	OCR4C  = (SYSCLOCK * USECPERTICK / 1000000) & 255; \
+	TC4H   = 0; \
+	TCNT4  = 0; \
+})
+
+//-----------------
+#if defined(CORE_OC4A_PIN)
+#	define TIMER_PWM_PIN  CORE_OC4A_PIN  // Teensy
+#elif defined(__AVR_ATmega32U4__)
+#	define TIMER_PWM_PIN  13             // Leonardo
+#else
+#	error "Please add OC4A pin number here\n"
+#endif
+
+//---------------------------------------------------------
+// Timer4 (16 bits)
+//
+#elif defined(IR_USE_TIMER4)
+
+#define TIMER_RESET
+#define TIMER_ENABLE_PWM    (TCCR4A |= _BV(COM4A1))
+#define TIMER_DISABLE_PWM   (TCCR4A &= ~(_BV(COM4A1)))
+#define TIMER_ENABLE_INTR   (TIMSK4 = _BV(OCIE4A))
+#define TIMER_DISABLE_INTR  (TIMSK4 = 0)
+#define TIMER_INTR_NAME     TIMER4_COMPA_vect
+
+#define TIMER_CONFIG_KHZ(val) ({ \
+  const uint16_t pwmval = SYSCLOCK / 2000 / (val); \
+  TCCR4A = _BV(WGM41); \
+  TCCR4B = _BV(WGM43) | _BV(CS40); \
+  ICR4 = pwmval; \
+  OCR4A = pwmval / 3; \
+})
+
+#define TIMER_CONFIG_NORMAL() ({ \
+  TCCR4A = 0; \
+  TCCR4B = _BV(WGM42) | _BV(CS40); \
+  OCR4A = SYSCLOCK * USECPERTICK / 1000000; \
+  TCNT4 = 0; \
+})
+
+//-----------------
+#if defined(CORE_OC4A_PIN)
+#	define TIMER_PWM_PIN  CORE_OC4A_PIN
+#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+#	define TIMER_PWM_PIN  6  // Arduino Mega
+#else
+#	error "Please add OC4A pin number here\n"
+#endif
+
+//---------------------------------------------------------
+// Timer5 (16 bits)
+//
+#elif defined(IR_USE_TIMER5)
+
+#define TIMER_RESET
+#define TIMER_ENABLE_PWM    (TCCR5A |= _BV(COM5A1))
+#define TIMER_DISABLE_PWM   (TCCR5A &= ~(_BV(COM5A1)))
+#define TIMER_ENABLE_INTR   (TIMSK5 = _BV(OCIE5A))
+#define TIMER_DISABLE_INTR  (TIMSK5 = 0)
+#define TIMER_INTR_NAME     TIMER5_COMPA_vect
+
+#define TIMER_CONFIG_KHZ(val) ({ \
+  const uint16_t pwmval = SYSCLOCK / 2000 / (val); \
+  TCCR5A = _BV(WGM51); \
+  TCCR5B = _BV(WGM53) | _BV(CS50); \
+  ICR5 = pwmval; \
+  OCR5A = pwmval / 3; \
+})
+
+#define TIMER_CONFIG_NORMAL() ({ \
+  TCCR5A = 0; \
+  TCCR5B = _BV(WGM52) | _BV(CS50); \
+  OCR5A = SYSCLOCK * USECPERTICK / 1000000; \
+  TCNT5 = 0; \
+})
+
+//-----------------
+#if defined(CORE_OC5A_PIN)
+#	define TIMER_PWM_PIN  CORE_OC5A_PIN
+#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+#	define TIMER_PWM_PIN  46  // Arduino Mega
+#else
+#	error "Please add OC5A pin number here\n"
+#endif
+
+//---------------------------------------------------------
+// Special carrier modulator timer
+//
+#elif defined(IR_USE_TIMER_CMT)
+
+#define TIMER_RESET ({     \
+	uint8_t tmp = CMT_MSC; \
+	CMT_CMD2 = 30;         \
+})
+
+#define TIMER_ENABLE_PWM  do {                                         \
+	CORE_PIN5_CONFIG = PORT_PCR_MUX(2) | PORT_PCR_DSE | PORT_PCR_SRE;  \
+} while(0)
+
+#define TIMER_DISABLE_PWM  do {                                        \
+	CORE_PIN5_CONFIG = PORT_PCR_MUX(1) | PORT_PCR_DSE | PORT_PCR_SRE;  \
+} while(0)
+
+#define TIMER_ENABLE_INTR   NVIC_ENABLE_IRQ(IRQ_CMT)
+#define TIMER_DISABLE_INTR  NVIC_DISABLE_IRQ(IRQ_CMT)
+#define TIMER_INTR_NAME     cmt_isr
+
+//-----------------
+#ifdef ISR
+#	undef ISR
+#endif
+#define  ISR(f)  void f(void)
+
+//-----------------
+#if (F_BUS == 48000000)
+#	define CMT_PPS_VAL  5
+#else
+#	define CMT_PPS_VAL  2
+#endif
+
+//-----------------
+#define TIMER_CONFIG_KHZ(val) ({ 	 \
+	SIM_SCGC4 |= SIM_SCGC4_CMT;      \
+	SIM_SOPT2 |= SIM_SOPT2_PTD7PAD;  \
+	CMT_PPS    = CMT_PPS_VAL;        \
+	CMT_CGH1   = 2667 / val;         \
+	CMT_CGL1   = 5333 / val;         \
+	CMT_CMD1   = 0;                  \
+	CMT_CMD2   = 30;                 \
+	CMT_CMD3   = 0;                  \
+	CMT_CMD4   = 0;                  \
+	CMT_OC     = 0x60;               \
+	CMT_MSC    = 0x01;               \
+})
+
+#define TIMER_CONFIG_NORMAL() ({  \
+	SIM_SCGC4 |= SIM_SCGC4_CMT;   \
+	CMT_PPS    = CMT_PPS_VAL;     \
+	CMT_CGH1   = 1;               \
+	CMT_CGL1   = 1;               \
+	CMT_CMD1   = 0;               \
+	CMT_CMD2   = 30               \
+	CMT_CMD3   = 0;               \
+	CMT_CMD4   = 19;              \
+	CMT_OC     = 0;               \
+	CMT_MSC    = 0x03;            \
+})
+
+#define TIMER_PWM_PIN  5
+
+// defines for TPM1 timer on Teensy-LC
+#elif defined(IR_USE_TIMER_TPM1)
+#define TIMER_RESET          FTM1_SC |= FTM_SC_TOF;
+#define TIMER_ENABLE_PWM     CORE_PIN16_CONFIG = PORT_PCR_MUX(3)|PORT_PCR_DSE|PORT_PCR_SRE
+#define TIMER_DISABLE_PWM    CORE_PIN16_CONFIG = PORT_PCR_MUX(1)|PORT_PCR_SRE
+#define TIMER_ENABLE_INTR    NVIC_ENABLE_IRQ(IRQ_FTM1)
+#define TIMER_DISABLE_INTR   NVIC_DISABLE_IRQ(IRQ_FTM1)
+#define TIMER_INTR_NAME      ftm1_isr
+#ifdef ISR
+#undef ISR
+#endif
+#define ISR(f) void f(void)
+#define TIMER_CONFIG_KHZ(val) ({                     \
+	SIM_SCGC6 |= SIM_SCGC6_TPM1;                 \
+	FTM1_SC = 0;                                 \
+	FTM1_CNT = 0;                                \
+	FTM1_MOD = (F_PLL/2000) / val - 1;           \
+	FTM1_C0V = (F_PLL/6000) / val - 1;           \
+	FTM1_SC = FTM_SC_CLKS(1) | FTM_SC_PS(0);     \
+})
+#define TIMER_CONFIG_NORMAL() ({                     \
+	SIM_SCGC6 |= SIM_SCGC6_TPM1;                 \
+	FTM1_SC = 0;                                 \
+	FTM1_CNT = 0;                                \
+	FTM1_MOD = (F_PLL/40000) - 1;                \
+	FTM1_C0V = 0;                                \
+	FTM1_SC = FTM_SC_CLKS(1) | FTM_SC_PS(0) | FTM_SC_TOF | FTM_SC_TOIE; \
+})
+#define TIMER_PWM_PIN        16
+
+// defines for timer_tiny0 (8 bits)
+#elif defined(IR_USE_TIMER_TINY0)
+#define TIMER_RESET
+#define TIMER_ENABLE_PWM     (TCCR0A |= _BV(COM0B1))
+#define TIMER_DISABLE_PWM    (TCCR0A &= ~(_BV(COM0B1)))
+#define TIMER_ENABLE_INTR    (TIMSK |= _BV(OCIE0A))
+#define TIMER_DISABLE_INTR   (TIMSK &= ~(_BV(OCIE0A)))
+#define TIMER_INTR_NAME      TIMER0_COMPA_vect
+#define TIMER_CONFIG_KHZ(val) ({ \
+  const uint8_t pwmval = SYSCLOCK / 2000 / (val); \
+  TCCR0A = _BV(WGM00); \
+  TCCR0B = _BV(WGM02) | _BV(CS00); \
+  OCR0A = pwmval; \
+  OCR0B = pwmval / 3; \
+})
+#define TIMER_COUNT_TOP      (SYSCLOCK * USECPERTICK / 1000000)
+#if (TIMER_COUNT_TOP < 256)
+#define TIMER_CONFIG_NORMAL() ({ \
+  TCCR0A = _BV(WGM01); \
+  TCCR0B = _BV(CS00); \
+  OCR0A = TIMER_COUNT_TOP; \
+  TCNT0 = 0; \
+})
+#else
+#define TIMER_CONFIG_NORMAL() ({ \
+  TCCR0A = _BV(WGM01); \
+  TCCR0B = _BV(CS01); \
+  OCR0A = TIMER_COUNT_TOP / 8; \
+  TCNT0 = 0; \
+})
+#endif
+
+#define TIMER_PWM_PIN        1  /* ATtiny85 */
+
+//---------------------------------------------------------
+// Unknown Timer
+//
+#else
+#	error "Internal code configuration error, no known IR_USE_TIMER# defined\n"
+#endif
+#endif

lib/IRremote_Tiny/LICENSE.txt

@@ -0,0 +1,458 @@
+
+		  GNU LESSER GENERAL PUBLIC LICENSE
+		       Version 2.1, February 1999
+
+ Copyright (C) 1991, 1999 Free Software Foundation, Inc.
+ 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+[This is the first released version of the Lesser GPL.  It also counts
+ as the successor of the GNU Library Public License, version 2, hence
+ the version number 2.1.]
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+Licenses are intended to guarantee your freedom to share and change
+free software--to make sure the software is free for all its users.
+
+  This license, the Lesser General Public License, applies to some
+specially designated software packages--typically libraries--of the
+Free Software Foundation and other authors who decide to use it.  You
+can use it too, but we suggest you first think carefully about whether
+this license or the ordinary General Public License is the better
+strategy to use in any particular case, based on the explanations below.
+
+  When we speak of free software, we are referring to freedom of use,
+not price.  Our General Public Licenses are designed to make sure that
+you have the freedom to distribute copies of free software (and charge
+for this service if you wish); that you receive source code or can get
+it if you want it; that you can change the software and use pieces of
+it in new free programs; and that you are informed that you can do
+these things.
+
+  To protect your rights, we need to make restrictions that forbid
+distributors to deny you these rights or to ask you to surrender these
+rights.  These restrictions translate to certain responsibilities for
+you if you distribute copies of the library or if you modify it.
+
+  For example, if you distribute copies of the library, whether gratis
+or for a fee, you must give the recipients all the rights that we gave
+you.  You must make sure that they, too, receive or can get the source
+code.  If you link other code with the library, you must provide
+complete object files to the recipients, so that they can relink them
+with the library after making changes to the library and recompiling
+it.  And you must show them these terms so they know their rights.
+
+  We protect your rights with a two-step method: (1) we copyright the
+library, and (2) we offer you this license, which gives you legal
+permission to copy, distribute and/or modify the library.
+
+  To protect each distributor, we want to make it very clear that
+there is no warranty for the free library.  Also, if the library is
+modified by someone else and passed on, the recipients should know
+that what they have is not the original version, so that the original
+author's reputation will not be affected by problems that might be
+introduced by others.
+
+  Finally, software patents pose a constant threat to the existence of
+any free program.  We wish to make sure that a company cannot
+effectively restrict the users of a free program by obtaining a
+restrictive license from a patent holder.  Therefore, we insist that
+any patent license obtained for a version of the library must be
+consistent with the full freedom of use specified in this license.
+
+  Most GNU software, including some libraries, is covered by the
+ordinary GNU General Public License.  This license, the GNU Lesser
+General Public License, applies to certain designated libraries, and
+is quite different from the ordinary General Public License.  We use
+this license for certain libraries in order to permit linking those
+libraries into non-free programs.
+
+  When a program is linked with a library, whether statically or using
+a shared library, the combination of the two is legally speaking a
+combined work, a derivative of the original library.  The ordinary
+General Public License therefore permits such linking only if the
+entire combination fits its criteria of freedom.  The Lesser General
+Public License permits more lax criteria for linking other code with
+the library.
+
+  We call this license the "Lesser" General Public License because it
+does Less to protect the user's freedom than the ordinary General
+Public License.  It also provides other free software developers Less
+of an advantage over competing non-free programs.  These disadvantages
+are the reason we use the ordinary General Public License for many
+libraries.  However, the Lesser license provides advantages in certain
+special circumstances.
+
+  For example, on rare occasions, there may be a special need to
+encourage the widest possible use of a certain library, so that it becomes
+a de-facto standard.  To achieve this, non-free programs must be
+allowed to use the library.  A more frequent case is that a free
+library does the same job as widely used non-free libraries.  In this
+case, there is little to gain by limiting the free library to free
+software only, so we use the Lesser General Public License.
+
+  In other cases, permission to use a particular library in non-free
+programs enables a greater number of people to use a large body of
+free software.  For example, permission to use the GNU C Library in
+non-free programs enables many more people to use the whole GNU
+operating system, as well as its variant, the GNU/Linux operating
+system.
+
+  Although the Lesser General Public License is Less protective of the
+users' freedom, it does ensure that the user of a program that is
+linked with the Library has the freedom and the wherewithal to run
+that program using a modified version of the Library.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.  Pay close attention to the difference between a
+"work based on the library" and a "work that uses the library".  The
+former contains code derived from the library, whereas the latter must
+be combined with the library in order to run.
+
+		  GNU LESSER GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License Agreement applies to any software library or other
+program which contains a notice placed by the copyright holder or
+other authorized party saying it may be distributed under the terms of
+this Lesser General Public License (also called "this License").
+Each licensee is addressed as "you".
+
+  A "library" means a collection of software functions and/or data
+prepared so as to be conveniently linked with application programs
+(which use some of those functions and data) to form executables.
+
+  The "Library", below, refers to any such software library or work
+which has been distributed under these terms.  A "work based on the
+Library" means either the Library or any derivative work under
+copyright law: that is to say, a work containing the Library or a
+portion of it, either verbatim or with modifications and/or translated
+straightforwardly into another language.  (Hereinafter, translation is
+included without limitation in the term "modification".)
+
+  "Source code" for a work means the preferred form of the work for
+making modifications to it.  For a library, complete source code means
+all the source code for all modules it contains, plus any associated
+interface definition files, plus the scripts used to control compilation
+and installation of the library.
+
+  Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running a program using the Library is not restricted, and output from
+such a program is covered only if its contents constitute a work based
+on the Library (independent of the use of the Library in a tool for
+writing it).  Whether that is true depends on what the Library does
+and what the program that uses the Library does.
+  
+  1. You may copy and distribute verbatim copies of the Library's
+complete source code as you receive it, in any medium, provided that
+you conspicuously and appropriately publish on each copy an
+appropriate copyright notice and disclaimer of warranty; keep intact
+all the notices that refer to this License and to the absence of any
+warranty; and distribute a copy of this License along with the
+Library.
+
+  You may charge a fee for the physical act of transferring a copy,
+and you may at your option offer warranty protection in exchange for a
+fee.
+
+  2. You may modify your copy or copies of the Library or any portion
+of it, thus forming a work based on the Library, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) The modified work must itself be a software library.
+
+    b) You must cause the files modified to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    c) You must cause the whole of the work to be licensed at no
+    charge to all third parties under the terms of this License.
+
+    d) If a facility in the modified Library refers to a function or a
+    table of data to be supplied by an application program that uses
+    the facility, other than as an argument passed when the facility
+    is invoked, then you must make a good faith effort to ensure that,
+    in the event an application does not supply such function or
+    table, the facility still operates, and performs whatever part of
+    its purpose remains meaningful.
+
+    (For example, a function in a library to compute square roots has
+    a purpose that is entirely well-defined independent of the
+    application.  Therefore, Subsection 2d requires that any
+    application-supplied function or table used by this function must
+    be optional: if the application does not supply it, the square
+    root function must still compute square roots.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Library,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Library, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote
+it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Library.
+
+In addition, mere aggregation of another work not based on the Library
+with the Library (or with a work based on the Library) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may opt to apply the terms of the ordinary GNU General Public
+License instead of this License to a given copy of the Library.  To do
+this, you must alter all the notices that refer to this License, so
+that they refer to the ordinary GNU General Public License, version 2,
+instead of to this License.  (If a newer version than version 2 of the
+ordinary GNU General Public License has appeared, then you can specify
+that version instead if you wish.)  Do not make any other change in
+these notices.
+
+  Once this change is made in a given copy, it is irreversible for
+that copy, so the ordinary GNU General Public License applies to all
+subsequent copies and derivative works made from that copy.
+
+  This option is useful when you wish to copy part of the code of
+the Library into a program that is not a library.
+
+  4. You may copy and distribute the Library (or a portion or
+derivative of it, under Section 2) in object code or executable form
+under the terms of Sections 1 and 2 above provided that you accompany
+it with the complete corresponding machine-readable source code, which
+must be distributed under the terms of Sections 1 and 2 above on a
+medium customarily used for software interchange.
+
+  If distribution of object code is made by offering access to copy
+from a designated place, then offering equivalent access to copy the
+source code from the same place satisfies the requirement to
+distribute the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  5. A program that contains no derivative of any portion of the
+Library, but is designed to work with the Library by being compiled or
+linked with it, is called a "work that uses the Library".  Such a
+work, in isolation, is not a derivative work of the Library, and
+therefore falls outside the scope of this License.
+
+  However, linking a "work that uses the Library" with the Library
+creates an executable that is a derivative of the Library (because it
+contains portions of the Library), rather than a "work that uses the
+library".  The executable is therefore covered by this License.
+Section 6 states terms for distribution of such executables.
+
+  When a "work that uses the Library" uses material from a header file
+that is part of the Library, the object code for the work may be a
+derivative work of the Library even though the source code is not.
+Whether this is true is especially significant if the work can be
+linked without the Library, or if the work is itself a library.  The
+threshold for this to be true is not precisely defined by law.
+
+  If such an object file uses only numerical parameters, data
+structure layouts and accessors, and small macros and small inline
+functions (ten lines or less in length), then the use of the object
+file is unrestricted, regardless of whether it is legally a derivative
+work.  (Executables containing this object code plus portions of the
+Library will still fall under Section 6.)
+
+  Otherwise, if the work is a derivative of the Library, you may
+distribute the object code for the work under the terms of Section 6.
+Any executables containing that work also fall under Section 6,
+whether or not they are linked directly with the Library itself.
+
+  6. As an exception to the Sections above, you may also combine or
+link a "work that uses the Library" with the Library to produce a
+work containing portions of the Library, and distribute that work
+under terms of your choice, provided that the terms permit
+modification of the work for the customer's own use and reverse
+engineering for debugging such modifications.
+
+  You must give prominent notice with each copy of the work that the
+Library is used in it and that the Library and its use are covered by
+this License.  You must supply a copy of this License.  If the work
+during execution displays copyright notices, you must include the
+copyright notice for the Library among them, as well as a reference
+directing the user to the copy of this License.  Also, you must do one
+of these things:
+
+    a) Accompany the work with the complete corresponding
+    machine-readable source code for the Library including whatever
+    changes were used in the work (which must be distributed under
+    Sections 1 and 2 above); and, if the work is an executable linked
+    with the Library, with the complete machine-readable "work that
+    uses the Library", as object code and/or source code, so that the
+    user can modify the Library and then relink to produce a modified
+    executable containing the modified Library.  (It is understood
+    that the user who changes the contents of definitions files in the
+    Library will not necessarily be able to recompile the application
+    to use the modified definitions.)
+
+    b) Use a suitable shared library mechanism for linking with the
+    Library.  A suitable mechanism is one that (1) uses at run time a
+    copy of the library already present on the user's computer system,
+    rather than copying library functions into the executable, and (2)
+    will operate properly with a modified version of the library, if
+    the user installs one, as long as the modified version is
+    interface-compatible with the version that the work was made with.
+
+    c) Accompany the work with a written offer, valid for at
+    least three years, to give the same user the materials
+    specified in Subsection 6a, above, for a charge no more
+    than the cost of performing this distribution.
+
+    d) If distribution of the work is made by offering access to copy
+    from a designated place, offer equivalent access to copy the above
+    specified materials from the same place.
+
+    e) Verify that the user has already received a copy of these
+    materials or that you have already sent this user a copy.
+
+  For an executable, the required form of the "work that uses the
+Library" must include any data and utility programs needed for
+reproducing the executable from it.  However, as a special exception,
+the materials to be distributed need not include anything that is
+normally distributed (in either source or binary form) with the major
+components (compiler, kernel, and so on) of the operating system on
+which the executable runs, unless that component itself accompanies
+the executable.
+
+  It may happen that this requirement contradicts the license
+restrictions of other proprietary libraries that do not normally
+accompany the operating system.  Such a contradiction means you cannot
+use both them and the Library together in an executable that you
+distribute.
+
+  7. You may place library facilities that are a work based on the
+Library side-by-side in a single library together with other library
+facilities not covered by this License, and distribute such a combined
+library, provided that the separate distribution of the work based on
+the Library and of the other library facilities is otherwise
+permitted, and provided that you do these two things:
+
+    a) Accompany the combined library with a copy of the same work
+    based on the Library, uncombined with any other library
+    facilities.  This must be distributed under the terms of the
+    Sections above.
+
+    b) Give prominent notice with the combined library of the fact
+    that part of it is a work based on the Library, and explaining
+    where to find the accompanying uncombined form of the same work.
+
+  8. You may not copy, modify, sublicense, link with, or distribute
+the Library except as expressly provided under this License.  Any
+attempt otherwise to copy, modify, sublicense, link with, or
+distribute the Library is void, and will automatically terminate your
+rights under this License.  However, parties who have received copies,
+or rights, from you under this License will not have their licenses
+terminated so long as such parties remain in full compliance.
+
+  9. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Library or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Library (or any work based on the
+Library), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Library or works based on it.
+
+  10. Each time you redistribute the Library (or any work based on the
+Library), the recipient automatically receives a license from the
+original licensor to copy, distribute, link with or modify the Library
+subject to these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties with
+this License.
+
+  11. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Library at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Library by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Library.
+
+If any portion of this section is held invalid or unenforceable under any
+particular circumstance, the balance of the section is intended to apply,
+and the section as a whole is intended to apply in other circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  12. If the distribution and/or use of the Library is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Library under this License may add
+an explicit geographical distribution limitation excluding those countries,
+so that distribution is permitted only in or among countries not thus
+excluded.  In such case, this License incorporates the limitation as if
+written in the body of this License.
+
+  13. The Free Software Foundation may publish revised and/or new
+versions of the Lesser General Public License from time to time.
+Such new versions will be similar in spirit to the present version,
+but may differ in detail to address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Library
+specifies a version number of this License which applies to it and
+"any later version", you have the option of following the terms and
+conditions either of that version or of any later version published by
+the Free Software Foundation.  If the Library does not specify a
+license version number, you may choose any version ever published by
+the Free Software Foundation.
+
+  14. If you wish to incorporate parts of the Library into other free
+programs whose distribution conditions are incompatible with these,
+write to the author to ask for permission.  For software which is
+copyrighted by the Free Software Foundation, write to the Free
+Software Foundation; we sometimes make exceptions for this.  Our
+decision will be guided by the two goals of preserving the free status
+of all derivatives of our free software and of promoting the sharing
+and reuse of software generally.
+
+			    NO WARRANTY
+
+  15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
+WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
+EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
+OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
+KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
+LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
+THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
+WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
+AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
+FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
+CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
+LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
+RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
+FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
+SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
+DAMAGES.
+

lib/IRremote_Tiny/README.md

@@ -0,0 +1,40 @@
+# IRremote Arduino Library
+
+[![Build Status](https://travis-ci.org/z3t0/Arduino-IRremote.svg?branch=dev)](https://travis-ci.org/z3t0/Arduino-IRremote)
+
+[![Join the chat at https://gitter.im/z3t0/Arduino-IRremote](https://badges.gitter.im/Join%20Chat.svg)](https://gitter.im/z3t0/Arduino-IRremote?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge&utm_content=badge)
+
+This library enables you to send and receive using infra-red signals on an Arduino.
+
+Check [here](http://z3t0.github.io/Arduino-IRremote/) for tutorials and more information.
+
+## Version - 2.1.0
+
+## Installation
+1. Navigate to the [Releases](https://github.com/z3t0/Arduino-IRremote/releases) page.
+2. Download the latest release.
+3. Extract the zip file
+4. Move the "IRremote" folder that has been extracted to your libraries directory.
+5. Make sure to delete Arduino_Root/libraries/RobotIRremote. Where Arduino_Root refers to the install directory of Arduino. The library RobotIRremote has similar definitions to IRremote and causes errors.
+
+## Usage
+- TODO (Check examples for now)
+
+## Contributing
+If you want to contribute to this project:
+- Report bugs and errors
+- Ask for enhancements
+- Create issues and pull requests
+- Tell other people about this library
+- Contribute new protocols
+- 
+
+## Contact
+The only way to contact me at the moment is by email: zetoslab@gmail.com
+I am not currently monitoring any PRs or Issues due to other issues but will respond to all emails. If anyone wants contributor access, feel free to email me. Or if you find any Issues/PRs to be of importance that my attention is needed please email me.
+
+## Contributors
+Check [here](Contributors.md)
+
+## Copyright
+Copyright 2009-2012 Ken Shirriff

lib/IRremote_Tiny/changelog.md

@@ -0,0 +1,50 @@
+## 2.1.0 - 2016/02/20
+- Improved Debugging [PR #258](https://github.com/z3t0/Arduino-IRremote/pull/258)
+- Display TIME instead of TICKS [PR #258](https://github.com/z3t0/Arduino-IRremote/pull/258)
+
+## 2.0.4 - 2016/02/20
+- Add Panasonic and JVC to IRrecord example [PR](https://github.com/z3t0/Arduino-IRremote/pull/54)
+
+## 2.0.3 - 2016/02/20
+- Change IRSend Raw parameter to const [PR](https://github.com/z3t0/Arduino-IRremote/pull/227)
+
+## 2.0.2 - 2015/12/02
+- Added IRremoteInfo Sketch - [PR](https://github.com/z3t0/Arduino-IRremote/pull/241)
+- Enforcing changelog.md
+
+## 2.0.1 - 2015/07/26 - [Release](https://github.com/shirriff/Arduino-IRremote/releases/tag/BETA)
+### Changes
+- Updated README
+- Updated Contributors 
+- Fixed #110 Mess
+- Created Gitter Room
+- Added Gitter Badge
+- Standardised Code Base
+- Clean Debug Output
+- Optimized Send Loops
+- Modularized Design
+- Optimized and Updated Examples
+- Improved Documentation
+- Fixed and Improved many coding errors
+- Fixed Aiwa RC-T501 Decoding
+- Fixed Interrupt on ATmega8
+- Switched to Stable Release of @PlatformIO
+
+### Additions
+- Added Aiwa RC-T501 Protocol
+- Added Denon Protocol
+- Added Pronto Support
+- Added Library Properties
+- Added Template For New Protocols 
+- Added this changelog
+- Added Teensy LC Support
+- Added ATtiny84 Support
+- Added ATtiny85 Support
+- Added isIdle method
+
+### Deletions
+- Removed (Fixed) #110
+- Broke Teensy 3 / 3.1 Support 
+
+### Not Working
+- Teensy 3 / 3.1 Support is in Development

lib/IRremote_Tiny/examples/AiwaRCT501SendDemo/AiwaRCT501SendDemo.ino

@@ -0,0 +1,26 @@
+/*
+ * IRremote: IRsendDemo - demonstrates sending IR codes with IRsend
+ * An IR LED must be connected to Arduino PWM pin 3.
+ * Version 0.1 July, 2009
+ * Copyright 2009 Ken Shirriff
+ * http://arcfn.com
+ */
+
+#include "IRremote.h"
+
+#define POWER 0x7F80
+#define AIWA_RC_T501
+
+IRsend irsend;
+
+void setup() {
+  Serial.begin(9600);
+  Serial.println("Arduino Ready");
+}
+
+void loop() {
+  if (Serial.read() != -1) {
+    irsend.sendAiwaRCT501(POWER);
+    delay(60); // Optional
+  }
+}

lib/IRremote_Tiny/examples/IRrecord/IRrecord.ino

@@ -0,0 +1,183 @@
+/*
+ * IRrecord: record and play back IR signals as a minimal 
+ * An IR detector/demodulator must be connected to the input RECV_PIN.
+ * An IR LED must be connected to the output PWM pin 3.
+ * A button must be connected to the input BUTTON_PIN; this is the
+ * send button.
+ * A visible LED can be connected to STATUS_PIN to provide status.
+ *
+ * The logic is:
+ * If the button is pressed, send the IR code.
+ * If an IR code is received, record it.
+ *
+ * Version 0.11 September, 2009
+ * Copyright 2009 Ken Shirriff
+ * http://arcfn.com
+ */
+
+#include <IRremote.h>
+
+int RECV_PIN = 11;
+int BUTTON_PIN = 12;
+int STATUS_PIN = 13;
+
+IRrecv irrecv(RECV_PIN);
+IRsend irsend;
+
+decode_results results;
+
+void setup()
+{
+  Serial.begin(9600);
+  irrecv.enableIRIn(); // Start the receiver
+  pinMode(BUTTON_PIN, INPUT);
+  pinMode(STATUS_PIN, OUTPUT);
+}
+
+// Storage for the recorded code
+int codeType = -1; // The type of code
+unsigned long codeValue; // The code value if not raw
+unsigned int rawCodes[RAWBUF]; // The durations if raw
+int codeLen; // The length of the code
+int toggle = 0; // The RC5/6 toggle state
+
+// Stores the code for later playback
+// Most of this code is just logging
+void storeCode(decode_results *results) {
+  codeType = results->decode_type;
+  int count = results->rawlen;
+  if (codeType == UNKNOWN) {
+    Serial.println("Received unknown code, saving as raw");
+    codeLen = results->rawlen - 1;
+    // To store raw codes:
+    // Drop first value (gap)
+    // Convert from ticks to microseconds
+    // Tweak marks shorter, and spaces longer to cancel out IR receiver distortion
+    for (int i = 1; i <= codeLen; i++) {
+      if (i % 2) {
+        // Mark
+        rawCodes[i - 1] = results->rawbuf[i]*USECPERTICK - MARK_EXCESS;
+        Serial.print(" m");
+      } 
+      else {
+        // Space
+        rawCodes[i - 1] = results->rawbuf[i]*USECPERTICK + MARK_EXCESS;
+        Serial.print(" s");
+      }
+      Serial.print(rawCodes[i - 1], DEC);
+    }
+    Serial.println("");
+  }
+  else {
+    if (codeType == NEC) {
+      Serial.print("Received NEC: ");
+      if (results->value == REPEAT) {
+        // Don't record a NEC repeat value as that's useless.
+        Serial.println("repeat; ignoring.");
+        return;
+      }
+    } 
+    else if (codeType == SONY) {
+      Serial.print("Received SONY: ");
+    } 
+    else if (codeType == PANASONIC) {
+      Serial.print("Received PANASONIC: ");
+    }
+    else if (codeType == JVC) {
+      Serial.print("Received JVC: ");
+    }
+    else if (codeType == RC5) {
+      Serial.print("Received RC5: ");
+    } 
+    else if (codeType == RC6) {
+      Serial.print("Received RC6: ");
+    } 
+    else {
+      Serial.print("Unexpected codeType ");
+      Serial.print(codeType, DEC);
+      Serial.println("");
+    }
+    Serial.println(results->value, HEX);
+    codeValue = results->value;
+    codeLen = results->bits;
+  }
+}
+
+void sendCode(int repeat) {
+  if (codeType == NEC) {
+    if (repeat) {
+      irsend.sendNEC(REPEAT, codeLen);
+      Serial.println("Sent NEC repeat");
+    } 
+    else {
+      irsend.sendNEC(codeValue, codeLen);
+      Serial.print("Sent NEC ");
+      Serial.println(codeValue, HEX);
+    }
+  } 
+  else if (codeType == SONY) {
+    irsend.sendSony(codeValue, codeLen);
+    Serial.print("Sent Sony ");
+    Serial.println(codeValue, HEX);
+  } 
+  else if (codeType == PANASONIC) {
+    irsend.sendPanasonic(codeValue, codeLen);
+    Serial.print("Sent Panasonic");
+    Serial.println(codeValue, HEX);
+  }
+  else if (codeType == JVC) {
+    irsend.sendPanasonic(codeValue, codeLen);
+    Serial.print("Sent JVC");
+    Serial.println(codeValue, HEX);
+  }
+  else if (codeType == RC5 || codeType == RC6) {
+    if (!repeat) {
+      // Flip the toggle bit for a new button press
+      toggle = 1 - toggle;
+    }
+    // Put the toggle bit into the code to send
+    codeValue = codeValue & ~(1 << (codeLen - 1));
+    codeValue = codeValue | (toggle << (codeLen - 1));
+    if (codeType == RC5) {
+      Serial.print("Sent RC5 ");
+      Serial.println(codeValue, HEX);
+      irsend.sendRC5(codeValue, codeLen);
+    } 
+    else {
+      irsend.sendRC6(codeValue, codeLen);
+      Serial.print("Sent RC6 ");
+      Serial.println(codeValue, HEX);
+    }
+  } 
+  else if (codeType == UNKNOWN /* i.e. raw */) {
+    // Assume 38 KHz
+    irsend.sendRaw(rawCodes, codeLen, 38);
+    Serial.println("Sent raw");
+  }
+}
+
+int lastButtonState;
+
+void loop() {
+  // If button pressed, send the code.
+  int buttonState = digitalRead(BUTTON_PIN);
+  if (lastButtonState == HIGH && buttonState == LOW) {
+    Serial.println("Released");
+    irrecv.enableIRIn(); // Re-enable receiver
+  }
+
+  if (buttonState) {
+    Serial.println("Pressed, sending");
+    digitalWrite(STATUS_PIN, HIGH);
+    sendCode(lastButtonState == buttonState);
+    digitalWrite(STATUS_PIN, LOW);
+    delay(50); // Wait a bit between retransmissions
+  } 
+  else if (irrecv.decode(&results)) {
+    digitalWrite(STATUS_PIN, HIGH);
+    storeCode(&results);
+    irrecv.resume(); // resume receiver
+    digitalWrite(STATUS_PIN, LOW);
+  }
+  lastButtonState = buttonState;
+}

lib/IRremote_Tiny/examples/IRrecvDemo/IRrecvDemo.ino

@@ -0,0 +1,29 @@
+/*
+ * IRremote: IRrecvDemo - demonstrates receiving IR codes with IRrecv
+ * An IR detector/demodulator must be connected to the input RECV_PIN.
+ * Version 0.1 July, 2009
+ * Copyright 2009 Ken Shirriff
+ * http://arcfn.com
+ */
+
+#include <IRremote.h>
+
+int RECV_PIN = 11;
+
+IRrecv irrecv(RECV_PIN);
+
+decode_results results;
+
+void setup()
+{
+  Serial.begin(9600);
+  irrecv.enableIRIn(); // Start the receiver
+}
+
+void loop() {
+  if (irrecv.decode(&results)) {
+    Serial.println(results.value, HEX);
+    irrecv.resume(); // Receive the next value
+  }
+  delay(100);
+}

lib/IRremote_Tiny/examples/IRrecvDump/IRrecvDump.ino

@@ -0,0 +1,95 @@
+/*
+ * IRremote: IRrecvDump - dump details of IR codes with IRrecv
+ * An IR detector/demodulator must be connected to the input RECV_PIN.
+ * Version 0.1 July, 2009
+ * Copyright 2009 Ken Shirriff
+ * http://arcfn.com
+ * JVC and Panasonic protocol added by Kristian Lauszus (Thanks to zenwheel and other people at the original blog post)
+ * LG added by Darryl Smith (based on the JVC protocol)
+ */
+
+#include <IRremote.h>
+
+/* 
+*  Default is Arduino pin D11. 
+*  You can change this to another available Arduino Pin.
+*  Your IR receiver should be connected to the pin defined here
+*/
+int RECV_PIN = 11; 
+
+IRrecv irrecv(RECV_PIN);
+
+decode_results results;
+
+void setup()
+{
+  Serial.begin(9600);
+  irrecv.enableIRIn(); // Start the receiver
+}
+
+
+void dump(decode_results *results) {
+  // Dumps out the decode_results structure.
+  // Call this after IRrecv::decode()
+  int count = results->rawlen;
+  if (results->decode_type == UNKNOWN) {
+    Serial.print("Unknown encoding: ");
+  }
+  else if (results->decode_type == NEC) {
+    Serial.print("Decoded NEC: ");
+
+  }
+  else if (results->decode_type == SONY) {
+    Serial.print("Decoded SONY: ");
+  }
+  else if (results->decode_type == RC5) {
+    Serial.print("Decoded RC5: ");
+  }
+  else if (results->decode_type == RC6) {
+    Serial.print("Decoded RC6: ");
+  }
+  else if (results->decode_type == PANASONIC) {
+    Serial.print("Decoded PANASONIC - Address: ");
+    Serial.print(results->address, HEX);
+    Serial.print(" Value: ");
+  }
+  else if (results->decode_type == LG) {
+    Serial.print("Decoded LG: ");
+  }
+  else if (results->decode_type == JVC) {
+    Serial.print("Decoded JVC: ");
+  }
+  else if (results->decode_type == AIWA_RC_T501) {
+    Serial.print("Decoded AIWA RC T501: ");
+  }
+  else if (results->decode_type == WHYNTER) {
+    Serial.print("Decoded Whynter: ");
+  }
+  Serial.print(results->value, HEX);
+  Serial.print(" (");
+  Serial.print(results->bits, DEC);
+  Serial.println(" bits)");
+  Serial.print("Raw (");
+  Serial.print(count, DEC);
+  Serial.print("): ");
+
+  for (int i = 1; i < count; i++) {
+    if (i & 1) {
+      Serial.print(results->rawbuf[i]*USECPERTICK, DEC);
+    }
+    else {
+      Serial.write('-');
+      Serial.print((unsigned long) results->rawbuf[i]*USECPERTICK, DEC);
+    }
+    Serial.print(" ");
+  }
+  Serial.println();
+}
+
+void loop() {
+  if (irrecv.decode(&results)) {
+    Serial.println(results.value, HEX);
+    dump(&results);
+    irrecv.resume(); // Receive the next value
+  }
+}

lib/IRremote_Tiny/examples/IRrecvDumpV2/IRrecvDumpV2.ino

@@ -0,0 +1,177 @@
+//------------------------------------------------------------------------------
+// Include the IRremote library header
+//
+#include <IRremote.h>
+
+//------------------------------------------------------------------------------
+// Tell IRremote which Arduino pin is connected to the IR Receiver (TSOP4838)
+//
+int recvPin = 11;
+IRrecv irrecv(recvPin);
+
+//+=============================================================================
+// Configure the Arduino
+//
+void  setup ( )
+{
+  Serial.begin(9600);   // Status message will be sent to PC at 9600 baud
+  irrecv.enableIRIn();  // Start the receiver
+}
+
+//+=============================================================================
+// Display IR code
+//
+void  ircode (decode_results *results)
+{
+  // Panasonic has an Address
+  if (results->decode_type == PANASONIC) {
+    Serial.print(results->address, HEX);
+    Serial.print(":");
+  }
+
+  // Print Code
+  Serial.print(results->value, HEX);
+}
+
+//+=============================================================================
+// Display encoding type
+//
+void  encoding (decode_results *results)
+{
+  switch (results->decode_type) {
+    default:
+    case UNKNOWN:      Serial.print("UNKNOWN");       break ;
+    case NEC:          Serial.print("NEC");           break ;
+    case SONY:         Serial.print("SONY");          break ;
+    case RC5:          Serial.print("RC5");           break ;
+    case RC6:          Serial.print("RC6");           break ;
+    case DISH:         Serial.print("DISH");          break ;
+    case SHARP:        Serial.print("SHARP");         break ;
+    case JVC:          Serial.print("JVC");           break ;
+    case SANYO:        Serial.print("SANYO");         break ;
+    case MITSUBISHI:   Serial.print("MITSUBISHI");    break ;
+    case SAMSUNG:      Serial.print("SAMSUNG");       break ;
+    case LG:           Serial.print("LG");            break ;
+    case WHYNTER:      Serial.print("WHYNTER");       break ;
+    case AIWA_RC_T501: Serial.print("AIWA_RC_T501");  break ;
+    case PANASONIC:    Serial.print("PANASONIC");     break ;
+    case DENON:        Serial.print("Denon");         break ;
+  }
+}
+
+//+=============================================================================
+// Dump out the decode_results structure.
+//
+void  dumpInfo (decode_results *results)
+{
+  // Check if the buffer overflowed
+  if (results->overflow) {
+    Serial.println("IR code too long. Edit IRremoteInt.h and increase RAWLEN");
+    return;
+  }
+
+  // Show Encoding standard
+  Serial.print("Encoding  : ");
+  encoding(results);
+  Serial.println("");
+
+  // Show Code & length
+  Serial.print("Code      : ");
+  ircode(results);
+  Serial.print(" (");
+  Serial.print(results->bits, DEC);
+  Serial.println(" bits)");
+}
+
+//+=============================================================================
+// Dump out the decode_results structure.
+//
+void  dumpRaw (decode_results *results)
+{
+  // Print Raw data
+  Serial.print("Timing[");
+  Serial.print(results->rawlen-1, DEC);
+  Serial.println("]: ");
+
+  for (int i = 1;  i < results->rawlen;  i++) {
+    unsigned long  x = results->rawbuf[i] * USECPERTICK;
+    if (!(i & 1)) {  // even
+      Serial.print("-");
+      if (x < 1000)  Serial.print(" ") ;
+      if (x < 100)   Serial.print(" ") ;
+      Serial.print(x, DEC);
+    } else {  // odd
+      Serial.print("     ");
+      Serial.print("+");
+      if (x < 1000)  Serial.print(" ") ;
+      if (x < 100)   Serial.print(" ") ;
+      Serial.print(x, DEC);
+      if (i < results->rawlen-1) Serial.print(", "); //',' not needed for last one
+    }
+    if (!(i % 8))  Serial.println("");
+  }
+  Serial.println("");                    // Newline
+}
+
+//+=============================================================================
+// Dump out the decode_results structure.
+//
+void  dumpCode (decode_results *results)
+{
+  // Start declaration
+  Serial.print("unsigned int  ");          // variable type
+  Serial.print("rawData[");                // array name
+  Serial.print(results->rawlen - 1, DEC);  // array size
+  Serial.print("] = {");                   // Start declaration
+
+  // Dump data
+  for (int i = 1;  i < results->rawlen;  i++) {
+    Serial.print(results->rawbuf[i] * USECPERTICK, DEC);
+    if ( i < results->rawlen-1 ) Serial.print(","); // ',' not needed on last one
+    if (!(i & 1))  Serial.print(" ");
+  }
+
+  // End declaration
+  Serial.print("};");  // 
+
+  // Comment
+  Serial.print("  // ");
+  encoding(results);
+  Serial.print(" ");
+  ircode(results);
+
+  // Newline
+  Serial.println("");
+
+  // Now dump "known" codes
+  if (results->decode_type != UNKNOWN) {
+
+    // Some protocols have an address
+    if (results->decode_type == PANASONIC) {
+      Serial.print("unsigned int  addr = 0x");
+      Serial.print(results->address, HEX);
+      Serial.println(";");
+    }
+
+    // All protocols have data
+    Serial.print("unsigned int  data = 0x");
+    Serial.print(results->value, HEX);
+    Serial.println(";");
+  }
+}
+
+//+=============================================================================
+// The repeating section of the code
+//
+void  loop ( )
+{
+  decode_results  results;        // Somewhere to store the results
+
+  if (irrecv.decode(&results)) {  // Grab an IR code
+    dumpInfo(&results);           // Output the results
+    dumpRaw(&results);            // Output the results in RAW format
+    dumpCode(&results);           // Output the results as source code
+    Serial.println("");           // Blank line between entries
+    irrecv.resume();              // Prepare for the next value
+  }
+}

lib/IRremote_Tiny/examples/IRrelay/IRrelay.ino

@@ -0,0 +1,85 @@
+/*
+ * IRremote: IRrecvDemo - demonstrates receiving IR codes with IRrecv
+ * An IR detector/demodulator must be connected to the input RECV_PIN.
+ * Version 0.1 July, 2009
+ * Copyright 2009 Ken Shirriff
+ * http://arcfn.com
+ */
+
+#include <IRremote.h>
+
+int RECV_PIN = 11;
+int RELAY_PIN = 4;
+
+IRrecv irrecv(RECV_PIN);
+decode_results results;
+
+// Dumps out the decode_results structure.
+// Call this after IRrecv::decode()
+// void * to work around compiler issue
+//void dump(void *v) {
+//  decode_results *results = (decode_results *)v
+void dump(decode_results *results) {
+  int count = results->rawlen;
+  if (results->decode_type == UNKNOWN) {
+    Serial.println("Could not decode message");
+  } 
+  else {
+    if (results->decode_type == NEC) {
+      Serial.print("Decoded NEC: ");
+    } 
+    else if (results->decode_type == SONY) {
+      Serial.print("Decoded SONY: ");
+    } 
+    else if (results->decode_type == RC5) {
+      Serial.print("Decoded RC5: ");
+    } 
+    else if (results->decode_type == RC6) {
+      Serial.print("Decoded RC6: ");
+    }
+    Serial.print(results->value, HEX);
+    Serial.print(" (");
+    Serial.print(results->bits, DEC);
+    Serial.println(" bits)");
+  }
+  Serial.print("Raw (");
+  Serial.print(count, DEC);
+  Serial.print("): ");
+
+  for (int i = 0; i < count; i++) {
+    if ((i % 2) == 1) {
+      Serial.print(results->rawbuf[i]*USECPERTICK, DEC);
+    } 
+    else {
+      Serial.print(-(int)results->rawbuf[i]*USECPERTICK, DEC);
+    }
+    Serial.print(" ");
+  }
+  Serial.println("");
+}
+
+void setup()
+{
+  pinMode(RELAY_PIN, OUTPUT);
+  pinMode(13, OUTPUT);
+    Serial.begin(9600);
+  irrecv.enableIRIn(); // Start the receiver
+}
+
+int on = 0;
+unsigned long last = millis();
+
+void loop() {
+  if (irrecv.decode(&results)) {
+    // If it's been at least 1/4 second since the last
+    // IR received, toggle the relay
+    if (millis() - last > 250) {
+      on = !on;
+      digitalWrite(RELAY_PIN, on ? HIGH : LOW);
+      digitalWrite(13, on ? HIGH : LOW);
+      dump(&results);
+    }
+    last = millis();      
+    irrecv.resume(); // Receive the next value
+  }
+}

lib/IRremote_Tiny/examples/IRremoteInfo/IRremoteInfo.ino

@@ -0,0 +1,210 @@
+/*
+ * IRremote: IRremoteInfo - prints relevant config info & settings for IRremote over serial
+ * Intended to help identify & troubleshoot the various settings of IRremote
+ * For example, sometimes users are unsure of which pin is used for Tx or the RAWBUF values
+ * This example can be used to assist the user directly or with support.
+ * Intended to help identify & troubleshoot the various settings of IRremote
+ * Hopefully this utility will be a useful tool for support & troubleshooting for IRremote
+ * Check out the blog post describing the sketch via http://www.analysir.com/blog/2015/11/28/helper-utility-for-troubleshooting-irremote/
+ * Version 1.0 November 2015
+ * Original Author: AnalysIR - IR software & modules for Makers & Pros, visit http://www.AnalysIR.com
+ */
+
+
+#include <IRremote.h>
+
+void setup()
+{
+  Serial.begin(115200); //You may alter the BAUD rate here as needed
+  while (!Serial); //wait until Serial is established - required on some Platforms
+
+  //Runs only once per restart of the Arduino.
+  dumpHeader();
+  dumpRAWBUF();
+  dumpTIMER();
+  dumpTimerPin();
+  dumpClock();
+  dumpPlatform();
+  dumpPulseParams();
+  dumpSignalParams();
+  dumpArduinoIDE();
+  dumpDebugMode();
+  dumpProtocols();
+  dumpFooter();
+}
+
+void loop() {
+  //nothing to do!
+}
+
+void dumpRAWBUF() {
+  Serial.print(F("RAWBUF: "));
+  Serial.println(RAWBUF);
+}
+
+void dumpTIMER() {
+  boolean flag = false;
+#ifdef IR_USE_TIMER1
+  Serial.print(F("Timer defined for use: ")); Serial.println(F("Timer1")); flag = true;
+#endif
+#ifdef IR_USE_TIMER2
+  Serial.print(F("Timer defined for use: ")); Serial.println(F("Timer2")); flag = true;
+#endif
+#ifdef IR_USE_TIMER3
+  Serial.print(F("Timer defined for use: ")); Serial.println(F("Timer3")); flag = true;
+#endif
+#ifdef IR_USE_TIMER4
+  Serial.print(F("Timer defined for use: ")); Serial.println(F("Timer4")); flag = true;
+#endif
+#ifdef IR_USE_TIMER5
+  Serial.print(F("Timer defined for use: ")); Serial.println(F("Timer5")); flag = true;
+#endif
+#ifdef IR_USE_TIMER4_HS
+  Serial.print(F("Timer defined for use: ")); Serial.println(F("Timer4_HS")); flag = true;
+#endif
+#ifdef IR_USE_TIMER_CMT
+  Serial.print(F("Timer defined for use: ")); Serial.println(F("Timer_CMT")); flag = true;
+#endif
+#ifdef IR_USE_TIMER_TPM1
+  Serial.print(F("Timer defined for use: ")); Serial.println(F("Timer_TPM1")); flag = true;
+#endif
+#ifdef IR_USE_TIMER_TINY0
+  Serial.print(F("Timer defined for use: ")); Serial.println(F("Timer_TINY0")); flag = true;
+#endif
+
+  if (!flag) {
+    Serial.print(F("Timer Error: ")); Serial.println(F("not defined"));
+  }
+}
+
+void dumpTimerPin() {
+  Serial.print(F("IR Tx Pin: "));
+  Serial.println(TIMER_PWM_PIN);
+}
+
+void dumpClock() {
+  Serial.print(F("MCU Clock: "));
+  Serial.println(F_CPU);
+}
+
+void dumpPlatform() {
+  Serial.print(F("MCU Platform: "));
+
+#if defined(__AVR_ATmega1280__)
+  Serial.println(F("Arduino Mega1280"));
+#elif  defined(__AVR_ATmega2560__)
+  Serial.println(F("Arduino Mega2560"));
+#elif defined(__AVR_AT90USB162__)
+  Serial.println(F("Teensy 1.0 / AT90USB162"));
+  // Teensy 2.0
+#elif defined(__AVR_ATmega32U4__)
+  Serial.println(F("Arduino Leonardo / Yun / Teensy 1.0 / ATmega32U4"));
+#elif defined(__MK20DX128__) || defined(__MK20DX256__)
+  Serial.println(F("Teensy 3.0 / Teensy 3.1 / MK20DX128 / MK20DX256"));
+#elif defined(__MKL26Z64__)
+  Serial.println(F("Teensy-LC / MKL26Z64"));
+#elif defined(__AVR_AT90USB646__)
+  Serial.println(F("Teensy++ 1.0 / AT90USB646"));
+#elif defined(__AVR_AT90USB1286__)
+  Serial.println(F("Teensy++ 2.0 / AT90USB1286"));
+#elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644__)
+  Serial.println(F("Sanguino / ATmega644(P)"));
+#elif defined(__AVR_ATmega8P__) || defined(__AVR_ATmega8__)
+  Serial.println(F("Atmega8 / ATmega8(P)"));
+#elif defined(__AVR_ATtiny84__)
+  Serial.println(F("ATtiny84"));
+#elif defined(__AVR_ATtiny85__)
+  Serial.println(F("ATtiny85"));
+#else
+  Serial.println(F("ATmega328(P) / (Duemilanove, Diecimila, LilyPad, Mini, Micro, Fio, Nano, etc)"));
+#endif
+}
+
+void dumpPulseParams() {
+  Serial.print(F("Mark Excess: ")); Serial.print(MARK_EXCESS);; Serial.println(F(" uSecs"));
+  Serial.print(F("Microseconds per tick: ")); Serial.print(USECPERTICK);; Serial.println(F(" uSecs"));
+  Serial.print(F("Measurement tolerance: ")); Serial.print(TOLERANCE); Serial.println(F("%"));
+}
+
+void dumpSignalParams() {
+  Serial.print(F("Minimum Gap between IR Signals: ")); Serial.print(_GAP); Serial.println(F(" uSecs"));
+}
+
+void dumpDebugMode() {
+  Serial.print(F("Debug Mode: "));
+#if DEBUG
+  Serial.println(F("ON"));
+#else
+  Serial.println(F("OFF (Normal)"));
+#endif
+
+}
+
+void dumpArduinoIDE() {
+  Serial.print(F("Arduino IDE version: "));
+  Serial.print(ARDUINO / 10000);
+  Serial.write('.');
+  Serial.print((ARDUINO % 10000) / 100);
+  Serial.write('.');
+  Serial.println(ARDUINO % 100);
+}
+
+void dumpProtocols() {
+
+  Serial.println(); Serial.print(F("IR PROTOCOLS  "));  Serial.print(F("SEND     "));  Serial.println(F("DECODE"));
+  Serial.print(F("============= "));  Serial.print(F("======== "));  Serial.println(F("========"));
+  Serial.print(F("RC5:          "));  printSendEnabled(SEND_RC5);  printDecodeEnabled(DECODE_RC6);
+  Serial.print(F("RC6:          "));  printSendEnabled(SEND_RC6);  printDecodeEnabled(DECODE_RC5);
+  Serial.print(F("NEC:          "));  printSendEnabled(SEND_NEC);  printDecodeEnabled(DECODE_NEC);
+  Serial.print(F("SONY:         "));  printSendEnabled(SEND_SONY);  printDecodeEnabled(DECODE_SONY);
+  Serial.print(F("PANASONIC:    "));  printSendEnabled(SEND_PANASONIC);  printDecodeEnabled(DECODE_PANASONIC);
+  Serial.print(F("JVC:          "));  printSendEnabled(SEND_JVC);  printDecodeEnabled(DECODE_JVC);
+  Serial.print(F("SAMSUNG:      "));  printSendEnabled(SEND_SAMSUNG);  printDecodeEnabled(DECODE_SAMSUNG);
+  Serial.print(F("WHYNTER:      "));  printSendEnabled(SEND_WHYNTER);  printDecodeEnabled(DECODE_WHYNTER);
+  Serial.print(F("AIWA_RC_T501: "));  printSendEnabled(SEND_AIWA_RC_T501);  printDecodeEnabled(DECODE_AIWA_RC_T501);
+  Serial.print(F("LG:           "));  printSendEnabled(SEND_LG);  printDecodeEnabled(DECODE_LG);
+  Serial.print(F("SANYO:        "));  printSendEnabled(SEND_SANYO);  printDecodeEnabled(DECODE_SANYO);
+  Serial.print(F("MITSUBISHI:   "));  printSendEnabled(SEND_MITSUBISHI);  printDecodeEnabled(DECODE_MITSUBISHI);
+  Serial.print(F("DISH:         "));  printSendEnabled(SEND_DISH);  printDecodeEnabled(DECODE_DISH);
+  Serial.print(F("SHARP:        "));  printSendEnabled(SEND_SHARP);  printDecodeEnabled(DECODE_SHARP);
+  Serial.print(F("DENON:        "));  printSendEnabled(SEND_DENON);  printDecodeEnabled(DECODE_DENON);
+  Serial.print(F("PRONTO:       "));  printSendEnabled(SEND_PRONTO);  Serial.println(F("(Not Applicable)"));
+}
+
+void printSendEnabled(int flag) {
+  if (flag) {
+    Serial.print(F("Enabled  "));
+  }
+  else {
+    Serial.print(F("Disabled "));
+  }
+}
+
+void printDecodeEnabled(int flag) {
+  if (flag) {
+    Serial.println(F("Enabled"));
+  }
+  else {
+    Serial.println(F("Disabled"));
+  }
+}
+
+void dumpHeader() {
+  Serial.println(F("IRremoteInfo - by AnalysIR (http://www.AnalysIR.com/)"));
+  Serial.println(F("             - A helper sketch to assist in troubleshooting issues with the library by reviewing the settings within the IRremote library"));
+  Serial.println(F("             - Prints out the important settings within the library, which can be configured to suit the many supported platforms"));
+  Serial.println(F("             - When seeking on-line support, please post or upload the output of this sketch, where appropriate"));
+  Serial.println();
+  Serial.println(F("IRremote Library Settings"));
+  Serial.println(F("========================="));
+}
+
+void dumpFooter() {
+  Serial.println();
+  Serial.println(F("Notes: "));
+  Serial.println(F("     - Most of the seetings above can be configured in the following files included as part of the library"));
+  Serial.println(F("     - IRremteInt.h"));
+  Serial.println(F("     - IRremote.h"));
+  Serial.println(F("     - You can save SRAM by disabling the Decode or Send features for any protocol (Near the top of IRremoteInt.h)"));
+  Serial.println(F("     - Some Timer conflicts, with other libraries, can be easily resolved by configuring a differnt Timer for your platform"));
+}

lib/IRremote_Tiny/examples/IRsendDemo/IRsendDemo.ino

@@ -0,0 +1,24 @@
+/*
+ * IRremote: IRsendDemo - demonstrates sending IR codes with IRsend
+ * An IR LED must be connected to Arduino PWM pin 3.
+ * Version 0.1 July, 2009
+ * Copyright 2009 Ken Shirriff
+ * http://arcfn.com
+ */
+
+
+#include <IRremote.h>
+
+IRsend irsend;
+
+void setup()
+{
+}
+
+void loop() {
+	for (int i = 0; i < 3; i++) {
+		irsend.sendSony(0xa90, 12);
+		delay(40);
+	}
+	delay(5000); //5 second delay between each signal burst
+}

lib/IRremote_Tiny/examples/IRsendRawDemo/IRsendRawDemo.ino

@@ -0,0 +1,37 @@
+/*
+ * IRremote: IRsendRawDemo - demonstrates sending IR codes with sendRaw
+ * An IR LED must be connected to Arduino PWM pin 3.
+ * Version 0.1 July, 2009
+ * Copyright 2009 Ken Shirriff
+ * http://arcfn.com
+ *
+ * IRsendRawDemo - added by AnalysIR (via www.AnalysIR.com), 24 August 2015
+ *
+ * This example shows how to send a RAW signal using the IRremote library.
+ * The example signal is actually a 32 bit NEC signal.
+ * Remote Control button: LGTV Power On/Off. 
+ * Hex Value: 0x20DF10EF, 32 bits
+ * 
+ * It is more efficient to use the sendNEC function to send NEC signals. 
+ * Use of sendRaw here, serves only as an example of using the function.
+ * 
+ */
+
+
+#include <IRremote.h>
+
+IRsend irsend;
+
+void setup()
+{
+
+}
+
+void loop() {
+  int khz = 38; // 38kHz carrier frequency for the NEC protocol
+  unsigned int irSignal[] = {9000, 4500, 560, 560, 560, 560, 560, 1690, 560, 560, 560, 560, 560, 560, 560, 560, 560, 560, 560, 1690, 560, 1690, 560, 560, 560, 1690, 560, 1690, 560, 1690, 560, 1690, 560, 1690, 560, 560, 560, 560, 560, 560, 560, 1690, 560, 560, 560, 560, 560, 560, 560, 560, 560, 1690, 560, 1690, 560, 1690, 560, 560, 560, 1690, 560, 1690, 560, 1690, 560, 1690, 560, 39416, 9000, 2210, 560}; //AnalysIR Batch Export (IRremote) - RAW
+  
+  irsend.sendRaw(irSignal, sizeof(irSignal) / sizeof(irSignal[0]), khz); //Note the approach used to automatically calculate the size of the array.
+
+  delay(5000); //In this example, the signal will be repeated every 5 seconds, approximately.
+}

lib/IRremote_Tiny/examples/IRtest/IRtest.ino

@@ -0,0 +1,190 @@
+/*
+ * IRremote: IRtest unittest
+ * Version 0.1 July, 2009
+ * Copyright 2009 Ken Shirriff
+ * http://arcfn.com
+ *
+ * Note: to run these tests, edit IRremote/IRremote.h to add "#define TEST"
+ * You must then recompile the library by removing IRremote.o and restarting
+ * the arduino IDE.
+ */
+
+#include <IRremote.h>
+#include <IRremoteInt.h>
+
+// Dumps out the decode_results structure.
+// Call this after IRrecv::decode()
+// void * to work around compiler issue
+//void dump(void *v) {
+//  decode_results *results = (decode_results *)v
+void dump(decode_results *results) {
+  int count = results->rawlen;
+  if (results->decode_type == UNKNOWN) {
+    Serial.println("Could not decode message");
+  } 
+  else {
+    if (results->decode_type == NEC) {
+      Serial.print("Decoded NEC: ");
+    } 
+    else if (results->decode_type == SONY) {
+      Serial.print("Decoded SONY: ");
+    } 
+    else if (results->decode_type == RC5) {
+      Serial.print("Decoded RC5: ");
+    } 
+    else if (results->decode_type == RC6) {
+      Serial.print("Decoded RC6: ");
+    }
+    Serial.print(results->value, HEX);
+    Serial.print(" (");
+    Serial.print(results->bits, DEC);
+    Serial.println(" bits)");
+  }
+  Serial.print("Raw (");
+  Serial.print(count, DEC);
+  Serial.print("): ");
+
+  for (int i = 0; i < count; i++) {
+    if ((i % 2) == 1) {
+      Serial.print(results->rawbuf[i]*USECPERTICK, DEC);
+    } 
+    else {
+      Serial.print(-(int)results->rawbuf[i]*USECPERTICK, DEC);
+    }
+    Serial.print(" ");
+  }
+  Serial.println("");
+}
+
+IRrecv irrecv(0);
+decode_results results;
+
+class IRsendDummy : 
+public IRsend
+{
+public:
+  // For testing, just log the marks/spaces
+#define SENDLOG_LEN 128
+  int sendlog[SENDLOG_LEN];
+  int sendlogcnt;
+  IRsendDummy() : 
+  IRsend() {
+  }
+  void reset() {
+    sendlogcnt = 0;
+  }
+  void mark(int time) {
+    sendlog[sendlogcnt] = time;
+    if (sendlogcnt < SENDLOG_LEN) sendlogcnt++;
+  }
+  void space(int time) {
+    sendlog[sendlogcnt] = -time;
+    if (sendlogcnt < SENDLOG_LEN) sendlogcnt++;
+  }
+  // Copies the dummy buf into the interrupt buf
+  void useDummyBuf() {
+    int last = SPACE;
+    irparams.rcvstate = STATE_STOP;
+    irparams.rawlen = 1; // Skip the gap
+    for (int i = 0 ; i < sendlogcnt; i++) {
+      if (sendlog[i] < 0) {
+        if (last == MARK) {
+          // New space
+          irparams.rawbuf[irparams.rawlen++] = (-sendlog[i] - MARK_EXCESS) / USECPERTICK;
+          last = SPACE;
+        } 
+        else {
+          // More space
+          irparams.rawbuf[irparams.rawlen - 1] += -sendlog[i] / USECPERTICK;
+        }
+      } 
+      else if (sendlog[i] > 0) {
+        if (last == SPACE) {
+          // New mark
+          irparams.rawbuf[irparams.rawlen++] = (sendlog[i] + MARK_EXCESS) / USECPERTICK;
+          last = MARK;
+        } 
+        else {
+          // More mark
+          irparams.rawbuf[irparams.rawlen - 1] += sendlog[i] / USECPERTICK;
+        }
+      }
+    }
+    if (irparams.rawlen % 2) {
+      irparams.rawlen--; // Remove trailing space
+    }
+  }
+};
+
+IRsendDummy irsenddummy;
+
+void verify(unsigned long val, int bits, int type) {
+  irsenddummy.useDummyBuf();
+  irrecv.decode(&results);
+  Serial.print("Testing ");
+  Serial.print(val, HEX);
+  if (results.value == val && results.bits == bits && results.decode_type == type) {
+    Serial.println(": OK");
+  } 
+  else {
+    Serial.println(": Error");
+    dump(&results);
+  }
+}  
+
+void testNEC(unsigned long val, int bits) {
+  irsenddummy.reset();
+  irsenddummy.sendNEC(val, bits);
+  verify(val, bits, NEC);
+}
+void testSony(unsigned long val, int bits) {
+  irsenddummy.reset();
+  irsenddummy.sendSony(val, bits);
+  verify(val, bits, SONY);
+}
+void testRC5(unsigned long val, int bits) {
+  irsenddummy.reset();
+  irsenddummy.sendRC5(val, bits);
+  verify(val, bits, RC5);
+}
+void testRC6(unsigned long val, int bits) {
+  irsenddummy.reset();
+  irsenddummy.sendRC6(val, bits);
+  verify(val, bits, RC6);
+}
+
+void test() {
+  Serial.println("NEC tests");
+  testNEC(0x00000000, 32);
+  testNEC(0xffffffff, 32);
+  testNEC(0xaaaaaaaa, 32);
+  testNEC(0x55555555, 32);
+  testNEC(0x12345678, 32);
+  Serial.println("Sony tests");
+  testSony(0xfff, 12);
+  testSony(0x000, 12);
+  testSony(0xaaa, 12);
+  testSony(0x555, 12);
+  testSony(0x123, 12);
+  Serial.println("RC5 tests");
+  testRC5(0xfff, 12);
+  testRC5(0x000, 12);
+  testRC5(0xaaa, 12);
+  testRC5(0x555, 12);
+  testRC5(0x123, 12);
+  Serial.println("RC6 tests");
+  testRC6(0xfffff, 20);
+  testRC6(0x00000, 20);
+  testRC6(0xaaaaa, 20);
+  testRC6(0x55555, 20);
+  testRC6(0x12345, 20);
+}
+
+void setup()
+{
+  Serial.begin(9600);
+  test();
+}
+
+void loop() {
+}

lib/IRremote_Tiny/examples/IRtest2/IRtest2.ino

@@ -0,0 +1,290 @@
+/*
+ * Test send/receive functions of IRremote, using a pair of Arduinos.
+ *
+ * Arduino #1 should have an IR LED connected to the send pin (3).
+ * Arduino #2 should have an IR detector/demodulator connected to the
+ * receive pin (11) and a visible LED connected to pin 3.
+ *
+ * The cycle:
+ *  Arduino #1 will wait 2 seconds, then run through the tests.
+ *  It repeats this forever.
+ *  Arduino #2 will wait for at least one second of no signal
+ *  (to synchronize with #1).  It will then wait for the same test
+ *  signals.  It will log all the status to the serial port.  It will
+ *  also indicate status through the LED, which will flash each time a test
+ *  is completed.  If there is an error, it will light up for 5 seconds.
+ *
+ * The test passes if the LED flashes 19 times, pauses, and then repeats.
+ * The test fails if the LED lights for 5 seconds.
+ *
+ * The test software automatically decides which board is the sender and which is
+ * the receiver by looking for an input on the send pin, which will indicate
+ * the sender.  You should hook the serial port to the receiver for debugging.
+ *  
+ * Copyright 2010 Ken Shirriff
+ * http://arcfn.com
+ */
+
+#include <IRremote.h>
+
+int RECV_PIN = 11;
+int LED_PIN = 3;
+
+IRrecv irrecv(RECV_PIN);
+IRsend irsend;
+
+decode_results results;
+
+#define RECEIVER 1
+#define SENDER 2
+#define ERROR 3
+
+int mode;
+
+void setup()
+{
+  Serial.begin(9600);
+  // Check RECV_PIN to decide if we're RECEIVER or SENDER
+  if (digitalRead(RECV_PIN) == HIGH) {
+    mode = RECEIVER;
+    irrecv.enableIRIn();
+    pinMode(LED_PIN, OUTPUT);
+    digitalWrite(LED_PIN, LOW);
+    Serial.println("Receiver mode");
+  } 
+  else {
+    mode = SENDER;
+    Serial.println("Sender mode");
+  }
+}
+
+// Wait for the gap between tests, to synchronize with
+// the sender.
+// Specifically, wait for a signal followed by a gap of at last gap ms.
+void waitForGap(int gap) {
+  Serial.println("Waiting for gap");
+  while (1) {
+    while (digitalRead(RECV_PIN) == LOW) { 
+    }
+    unsigned long time = millis();
+    while (digitalRead(RECV_PIN) == HIGH) {
+      if (millis() - time > gap) {
+        return;
+      }
+    }
+  }
+}
+
+// Dumps out the decode_results structure.
+// Call this after IRrecv::decode()
+void dump(decode_results *results) {
+  int count = results->rawlen;
+  if (results->decode_type == UNKNOWN) {
+    Serial.println("Could not decode message");
+  } 
+  else {
+    if (results->decode_type == NEC) {
+      Serial.print("Decoded NEC: ");
+    } 
+    else if (results->decode_type == SONY) {
+      Serial.print("Decoded SONY: ");
+    } 
+    else if (results->decode_type == RC5) {
+      Serial.print("Decoded RC5: ");
+    } 
+    else if (results->decode_type == RC6) {
+      Serial.print("Decoded RC6: ");
+    }
+    Serial.print(results->value, HEX);
+    Serial.print(" (");
+    Serial.print(results->bits, DEC);
+    Serial.println(" bits)");
+  }
+  Serial.print("Raw (");
+  Serial.print(count, DEC);
+  Serial.print("): ");
+
+  for (int i = 0; i < count; i++) {
+    if ((i % 2) == 1) {
+      Serial.print(results->rawbuf[i]*USECPERTICK, DEC);
+    } 
+    else {
+      Serial.print(-(int)results->rawbuf[i]*USECPERTICK, DEC);
+    }
+    Serial.print(" ");
+  }
+  Serial.println("");
+}
+
+
+// Test send or receive.
+// If mode is SENDER, send a code of the specified type, value, and bits
+// If mode is RECEIVER, receive a code and verify that it is of the
+// specified type, value, and bits.  For success, the LED is flashed;
+// for failure, the mode is set to ERROR.
+// The motivation behind this method is that the sender and the receiver
+// can do the same test calls, and the mode variable indicates whether
+// to send or receive.
+void test(char *label, int type, unsigned long value, int bits) {
+  if (mode == SENDER) {
+    Serial.println(label);
+    if (type == NEC) {
+      irsend.sendNEC(value, bits);
+    } 
+    else if (type == SONY) {
+      irsend.sendSony(value, bits);
+    } 
+    else if (type == RC5) {
+      irsend.sendRC5(value, bits);
+    } 
+    else if (type == RC6) {
+      irsend.sendRC6(value, bits);
+    } 
+    else {
+      Serial.print(label);
+      Serial.println("Bad type!");
+    }
+    delay(200);
+  } 
+  else if (mode == RECEIVER) {
+    irrecv.resume(); // Receive the next value
+    unsigned long max_time = millis() + 30000;
+    Serial.print(label);
+
+    // Wait for decode or timeout
+    while (!irrecv.decode(&results)) {
+      if (millis() > max_time) {
+        Serial.println("Timeout receiving data");
+        mode = ERROR;
+        return;
+      }
+    }
+    if (type == results.decode_type && value == results.value && bits == results.bits) {
+      Serial.println (": OK");
+      digitalWrite(LED_PIN, HIGH);
+      delay(20);
+      digitalWrite(LED_PIN, LOW);
+    } 
+    else {
+      Serial.println(": BAD");
+      dump(&results);
+      mode = ERROR;
+    }
+  }
+}
+
+// Test raw send or receive.  This is similar to the test method,
+// except it send/receives raw data.
+void testRaw(char *label, unsigned int *rawbuf, int rawlen) {
+  if (mode == SENDER) {
+    Serial.println(label);
+    irsend.sendRaw(rawbuf, rawlen, 38 /* kHz */);
+    delay(200);
+  } 
+  else if (mode == RECEIVER ) {
+    irrecv.resume(); // Receive the next value
+    unsigned long max_time = millis() + 30000;
+    Serial.print(label);
+
+    // Wait for decode or timeout
+    while (!irrecv.decode(&results)) {
+      if (millis() > max_time) {
+        Serial.println("Timeout receiving data");
+        mode = ERROR;
+        return;
+      }
+    }
+
+    // Received length has extra first element for gap
+    if (rawlen != results.rawlen - 1) {
+      Serial.print("Bad raw length ");
+      Serial.println(results.rawlen, DEC);
+      mode = ERROR;
+      return;
+    }
+    for (int i = 0; i < rawlen; i++) {
+      long got = results.rawbuf[i+1] * USECPERTICK;
+      // Adjust for extra duration of marks
+      if (i % 2 == 0) { 
+        got -= MARK_EXCESS;
+      } 
+      else {
+        got += MARK_EXCESS;
+      }
+      // See if close enough, within 25%
+      if (rawbuf[i] * 1.25 < got || got * 1.25 < rawbuf[i]) {
+        Serial.println(": BAD");
+        dump(&results);
+        mode = ERROR;
+        return;
+      }
+
+    }
+    Serial.println (": OK");
+    digitalWrite(LED_PIN, HIGH);
+    delay(20);
+    digitalWrite(LED_PIN, LOW);
+  }
+}   
+
+// This is the raw data corresponding to NEC 0x12345678
+unsigned int sendbuf[] = { /* NEC format */
+  9000, 4500,
+  560, 560, 560, 560, 560, 560, 560, 1690, /* 1 */
+  560, 560, 560, 560, 560, 1690, 560, 560, /* 2 */
+  560, 560, 560, 560, 560, 1690, 560, 1690, /* 3 */
+  560, 560, 560, 1690, 560, 560, 560, 560, /* 4 */
+  560, 560, 560, 1690, 560, 560, 560, 1690, /* 5 */
+  560, 560, 560, 1690, 560, 1690, 560, 560, /* 6 */
+  560, 560, 560, 1690, 560, 1690, 560, 1690, /* 7 */
+  560, 1690, 560, 560, 560, 560, 560, 560, /* 8 */
+  560};
+
+void loop() {
+  if (mode == SENDER) {
+    delay(2000);  // Delay for more than gap to give receiver a better chance to sync.
+  } 
+  else if (mode == RECEIVER) {
+    waitForGap(1000);
+  } 
+  else if (mode == ERROR) {
+    // Light up for 5 seconds for error
+    digitalWrite(LED_PIN, HIGH);
+    delay(5000);
+    digitalWrite(LED_PIN, LOW);
+    mode = RECEIVER;  // Try again
+    return;
+  }
+
+  // The test suite.
+  test("SONY1", SONY, 0x123, 12);
+  test("SONY2", SONY, 0x000, 12);
+  test("SONY3", SONY, 0xfff, 12);
+  test("SONY4", SONY, 0x12345, 20);
+  test("SONY5", SONY, 0x00000, 20);
+  test("SONY6", SONY, 0xfffff, 20);
+  test("NEC1", NEC, 0x12345678, 32);
+  test("NEC2", NEC, 0x00000000, 32);
+  test("NEC3", NEC, 0xffffffff, 32);
+  test("NEC4", NEC, REPEAT, 32);
+  test("RC51", RC5, 0x12345678, 32);
+  test("RC52", RC5, 0x0, 32);
+  test("RC53", RC5, 0xffffffff, 32);
+  test("RC61", RC6, 0x12345678, 32);
+  test("RC62", RC6, 0x0, 32);
+  test("RC63", RC6, 0xffffffff, 32);
+
+  // Tests of raw sending and receiving.
+  // First test sending raw and receiving raw.
+  // Then test sending raw and receiving decoded NEC
+  // Then test sending NEC and receiving raw
+  testRaw("RAW1", sendbuf, 67);
+  if (mode == SENDER) {
+    testRaw("RAW2", sendbuf, 67);
+    test("RAW3", NEC, 0x12345678, 32);
+  } 
+  else {
+    test("RAW2", NEC, 0x12345678, 32);
+    testRaw("RAW3", sendbuf, 67);
+  }
+}

lib/IRremote_Tiny/examples/JVCPanasonicSendDemo/JVCPanasonicSendDemo.ino

@@ -0,0 +1,29 @@
+/*
+ * IRremote: IRsendDemo - demonstrates sending IR codes with IRsend
+ * An IR LED must be connected to Arduino PWM pin 3.
+ * Version 0.1 July, 2009
+ * Copyright 2009 Ken Shirriff
+ * http://arcfn.com
+ * JVC and Panasonic protocol added by Kristian Lauszus (Thanks to zenwheel and other people at the original blog post)
+ */
+#include <IRremote.h>
+ 
+#define PanasonicAddress      0x4004     // Panasonic address (Pre data) 
+#define PanasonicPower        0x100BCBD  // Panasonic Power button
+
+#define JVCPower              0xC5E8
+
+IRsend irsend;
+
+void setup()
+{
+}
+
+void loop() {
+  irsend.sendPanasonic(PanasonicAddress,PanasonicPower); // This should turn your TV on and off
+  
+  irsend.sendJVC(JVCPower, 16,0); // hex value, 16 bits, no repeat
+  delayMicroseconds(50); // see http://www.sbprojects.com/knowledge/ir/jvc.php for information
+  irsend.sendJVC(JVCPower, 16,1); // hex value, 16 bits, repeat
+  delayMicroseconds(50);
+}

lib/IRremote_Tiny/examples/LGACSendDemo/LGACSendDemo.ino

@@ -0,0 +1,263 @@
+#include <IRremote.h>
+#include <Wire.h>
+
+
+IRsend irsend;
+// not used
+int RECV_PIN = 11;
+IRrecv irrecv (RECV_PIN);
+
+const int AC_TYPE  = 0;
+// 0 : TOWER
+// 1 : WALL
+//
+
+int AC_HEAT = 0;
+// 0 : cooling
+// 1 : heating
+
+int AC_POWER_ON    = 0;
+// 0 : off
+// 1 : on
+
+int AC_AIR_ACLEAN  = 0;
+// 0 : off
+// 1 : on --> power on
+
+int AC_TEMPERATURE = 27;
+// temperature : 18 ~ 30
+
+int AC_FLOW        = 1;
+// 0 : low
+// 1 : mid
+// 2 : high
+// if AC_TYPE =1, 3 : change
+//
+
+
+const int AC_FLOW_TOWER[3] = {0, 4, 6};
+const int AC_FLOW_WALL[4]  = {0, 2, 4, 5};
+
+unsigned long AC_CODE_TO_SEND;
+
+int r = LOW;
+int o_r = LOW;
+
+byte a, b;
+
+void ac_send_code(unsigned long code)
+{
+  Serial.print("code to send : ");
+  Serial.print(code, BIN);
+  Serial.print(" : ");
+  Serial.println(code, HEX);
+
+  irsend.sendLG(code, 28);
+}
+
+void ac_activate(int temperature, int air_flow)
+{
+
+  int AC_MSBITS1 = 8;
+  int AC_MSBITS2 = 8;
+  int AC_MSBITS3 = 0;
+  int AC_MSBITS4 ;
+  if ( AC_HEAT == 1 ) {
+    // heating
+    AC_MSBITS4 = 4;
+  } else {
+    // cooling
+    AC_MSBITS4 = 0;
+  }
+  int AC_MSBITS5 = temperature - 15;
+  int AC_MSBITS6 ;
+
+  if ( AC_TYPE == 0) {
+    AC_MSBITS6 = AC_FLOW_TOWER[air_flow];
+  } else {
+    AC_MSBITS6 = AC_FLOW_WALL[air_flow];
+  }
+
+  int AC_MSBITS7 = (AC_MSBITS3 + AC_MSBITS4 + AC_MSBITS5 + AC_MSBITS6) & B00001111;
+
+  AC_CODE_TO_SEND =  AC_MSBITS1 << 4 ;
+  AC_CODE_TO_SEND =  (AC_CODE_TO_SEND + AC_MSBITS2) << 4;
+  AC_CODE_TO_SEND =  (AC_CODE_TO_SEND + AC_MSBITS3) << 4;
+  AC_CODE_TO_SEND =  (AC_CODE_TO_SEND + AC_MSBITS4) << 4;
+  AC_CODE_TO_SEND =  (AC_CODE_TO_SEND + AC_MSBITS5) << 4;
+  AC_CODE_TO_SEND =  (AC_CODE_TO_SEND + AC_MSBITS6) << 4;
+  AC_CODE_TO_SEND =  (AC_CODE_TO_SEND + AC_MSBITS7);
+
+  ac_send_code(AC_CODE_TO_SEND);
+
+  AC_POWER_ON = 1;
+  AC_TEMPERATURE = temperature;
+  AC_FLOW = air_flow;
+}
+
+void ac_change_air_swing(int air_swing)
+{
+  if ( AC_TYPE == 0) {
+    if ( air_swing == 1) {
+      AC_CODE_TO_SEND = 0x881316B;
+    } else {
+      AC_CODE_TO_SEND = 0x881317C;
+    }
+  } else {
+    if ( air_swing == 1) {
+      AC_CODE_TO_SEND = 0x8813149;
+    } else {
+      AC_CODE_TO_SEND = 0x881315A;
+    }
+  }
+
+  ac_send_code(AC_CODE_TO_SEND);
+}
+
+void ac_power_down()
+{
+  AC_CODE_TO_SEND = 0x88C0051;
+
+  ac_send_code(AC_CODE_TO_SEND);
+
+  AC_POWER_ON = 0;
+}
+
+void ac_air_clean(int air_clean)
+{
+  if ( air_clean == 1) {
+    AC_CODE_TO_SEND = 0x88C000C;
+  } else {
+    AC_CODE_TO_SEND = 0x88C0084;
+  }
+
+  ac_send_code(AC_CODE_TO_SEND);
+
+  AC_AIR_ACLEAN = air_clean;
+}
+
+void setup()
+{
+  Serial.begin(38400);
+  delay(1000);
+  Wire.begin(7);
+  Wire.onReceive(receiveEvent);
+
+  Serial.println("  - - - T E S T - - -   ");
+
+  /* test
+    ac_activate(25, 1);
+    delay(5000);
+    ac_activate(27, 2);
+    delay(5000);
+
+  */
+}
+
+void loop()
+{
+
+
+  ac_activate(25, 1);
+  delay(5000);
+  ac_activate(27, 0);
+  delay(5000);
+
+
+  if ( r != o_r) {
+
+    /*
+    # a : mode or temp    b : air_flow, temp, swing, clean, cooling/heating
+    # 18 ~ 30 : temp      0 ~ 2 : flow // on
+    # 0 : off             0
+    # 1 : on              0
+    # 2 : air_swing       0 or 1
+    # 3 : air_clean       0 or 1
+    # 4 : air_flow        0 ~ 2 : flow
+    # 5 : temp            18 ~ 30
+    # + : temp + 1
+    # - : temp - 1
+    # m : change cooling to air clean, air clean to cooling
+    */
+    Serial.print("a : ");
+    Serial.print(a);
+    Serial.print("  b : ");
+    Serial.println(b);
+
+    switch (a) {
+      case 0: // off
+        ac_power_down();
+        break;
+      case 1: // on
+        ac_activate(AC_TEMPERATURE, AC_FLOW);
+        break;
+      case 2:
+        if ( b == 0 | b == 1 ) {
+          ac_change_air_swing(b);
+        }
+        break;
+      case 3: // 1  : clean on, power on
+        if ( b == 0 | b == 1 ) {
+          ac_air_clean(b);
+        }
+        break;
+      case 4:
+        if ( 0 <= b && b <= 2  ) {
+          ac_activate(AC_TEMPERATURE, b);
+        }
+        break;
+      case 5:
+        if (18 <= b && b <= 30  ) {
+          ac_activate(b, AC_FLOW);
+        }
+        break;
+      case '+':
+        if ( 18 <= AC_TEMPERATURE && AC_TEMPERATURE <= 29 ) {
+          ac_activate((AC_TEMPERATURE + 1), AC_FLOW);
+        }
+        break;
+      case '-':
+        if ( 19 <= AC_TEMPERATURE && AC_TEMPERATURE <= 30 ) {
+          ac_activate((AC_TEMPERATURE - 1), AC_FLOW);
+        }
+        break;
+      case 'm':
+        /*
+          if ac is on,  1) turn off, 2) turn on ac_air_clean(1)
+          if ac is off, 1) turn on,  2) turn off ac_air_clean(0)
+        */
+        if ( AC_POWER_ON == 1 ) {
+          ac_power_down();
+          delay(100);
+          ac_air_clean(1);
+        } else {
+          if ( AC_AIR_ACLEAN == 1) {
+            ac_air_clean(0);
+            delay(100);
+          }
+          ac_activate(AC_TEMPERATURE, AC_FLOW);
+        }
+        break;
+      default:
+        if ( 18 <= a && a <= 30 ) {
+          if ( 0 <= b && b <= 2 ) {
+            ac_activate(a, b);
+          }
+        }
+    }
+
+    o_r = r ;
+  }
+  delay(100);
+}
+
+
+
+void receiveEvent(int howMany)
+{
+  a = Wire.read();
+  b = Wire.read();
+  r = !r ;
+}
+
+

lib/IRremote_Tiny/examples/LGACSendDemo/LGACSendDemo.md

@@ -0,0 +1,93 @@
+=== decoding for LG A/C ====
+- 1) remote of LG AC has two type of HDR mark/space, 8000/4000 and 3100/10000 
+- 2) HDR 8000/4000 is decoded using decodeLG(IRrecvDumpV2) without problem
+- 3) for HDR 3100/10000, use AnalysIR's code : http://www.analysir.com/blog/2014/03/19/air-conditioners-problems-recording-long-infrared-remote-control-signals-arduino/
+- 4) for bin output based on AnalysIR's code : https://gist.github.com/chaeplin/a3a4b4b6b887c663bfe8
+- 5) remove first two byte(11)
+- 6) sample rawcode with bin output : https://gist.github.com/chaeplin/134d232e0b8cfb898860
+
+
+=== *** ===
+- 1) Sample raw code : https://gist.github.com/chaeplin/ab2a7ad1533c41260f0d
+- 2) send raw code : https://gist.github.com/chaeplin/7c800d3166463bb51be4
+
+
+=== *** ===
+- (0) : Cooling or Heating
+- (1) : fixed 
+- (2) : fixed
+- (3) : special(power, swing, air clean)
+- (4) : change air flow, temperature, cooling(0)/heating(4)
+- (5) : temperature ( 15 + (5) = )
+- (6) : air flow
+- (7) : crc ( 3 + 4 + 5 + 6 ) & B00001111
+
+
+°F = °C × 1.8 + 32
+°C = (°F − 32) / 1.8
+
+
+=== *** ===
+* remote / Korea / without heating
+
+|       status   |(0)| (1)| (2)| (3)| (4)| (5)| (6)| (7)
+|----------------|---|----|----|----|----|----|----|----
+| on / 25 / mid  | C |1000|1000|0000|0000|1010|0010|1100
+| on / 26 / mid  | C |1000|1000|0000|0000|1011|0010|1101      
+| on / 27 / mid  | C |1000|1000|0000|0000|1100|0010|1110     
+| on / 28 / mid  | C |1000|1000|0000|0000|1101|0010|1111     
+| on / 25 / high | C |1000|1000|0000|0000|1010|0100|1110     
+| on / 26 / high | C |1000|1000|0000|0000|1011|0100|1111     
+| on / 27 / high | C |1000|1000|0000|0000|1100|0100|0000     
+| on / 28 / high | C |1000|1000|0000|0000|1101|0100|0001
+|----------------|---|----|----|----|----|----|----|----    
+| 1 up           | C |1000|1000|0000|1000|1101|0100|1001 
+|----------------|---|----|----|----|----|----|----|----    
+| Cool power     | C |1000|1000|0001|0000|0000|1100|1101     
+| energy saving  | C |1000|1000|0001|0000|0000|0100|0101     
+| power          | C |1000|1000|0001|0000|0000|1000|1001            
+| flow/up/down   | C |1000|1000|0001|0011|0001|0100|1001     
+| up/down off    | C |1000|1000|0001|0011|0001|0101|1010     
+| flow/left/right| C |1000|1000|0001|0011|0001|0110|1011     
+| left/right off | C |1000|1000|0001|0011|0001|0111|1100 
+|----------------|---|----|----|----|----|----|----|----    
+| Air clean      | C |1000|1000|1100|0000|0000|0000|1100
+|----------------|---|----|----|----|----|----|----|----    
+| off            | C |1000|1000|1100|0000|0000|0101|0001 
+
+
+
+* remote / with heating 
+* converted using raw code at https://github.com/chaeplin/RaspAC/blob/master/lircd.conf 
+
+|       status   |(0)| (1)| (2)| (3)| (4)| (5)| (6)| (7)
+|----------------|---|----|----|----|----|----|----|----
+| on             | C |1000|1000|0000|0000|1011|0010|1101
+|----------------|---|----|----|----|----|----|----|----
+| off            | C |1000|1000|1100|0000|0000|0101|0001
+|----------------|---|----|----|----|----|----|----|----
+| 64  / 18       | C |1000|1000|0000|0000|0011|0100|0111
+| 66  / 19       | C |1000|1000|0000|0000|0100|0100|1000
+| 68  / 20       | C |1000|1000|0000|0000|0101|0100|1001
+| 70  / 21       | C |1000|1000|0000|0000|0110|0100|1010
+| 72  / 22       | C |1000|1000|0000|0000|0111|0100|1011
+| 74  / 23       | C |1000|1000|0000|0000|1000|0100|1100
+| 76  / 25       | C |1000|1000|0000|0000|1010|0100|1110
+| 78  / 26       | C |1000|1000|0000|0000|1011|0100|1111
+| 80  / 27       | C |1000|1000|0000|0000|1100|0100|0000
+| 82  / 28       | C |1000|1000|0000|0000|1101|0100|0001
+| 84  / 29       | C |1000|1000|0000|0000|1110|0100|0010
+| 86  / 30       | C |1000|1000|0000|0000|1111|0100|0011
+|----------------|---|----|----|----|----|----|----|----
+| heat64         | H |1000|1000|0000|0100|0011|0100|1011
+| heat66         | H |1000|1000|0000|0100|0100|0100|1100
+| heat68         | H |1000|1000|0000|0100|0101|0100|1101
+| heat70         | H |1000|1000|0000|0100|0110|0100|1110
+| heat72         | H |1000|1000|0000|0100|0111|0100|1111
+| heat74         | H |1000|1000|0000|0100|1000|0100|0000
+| heat76         | H |1000|1000|0000|0100|1001|0100|0001
+| heat78         | H |1000|1000|0000|0100|1011|0100|0011
+| heat80         | H |1000|1000|0000|0100|1100|0100|0100
+| heat82         | H |1000|1000|0000|0100|1101|0100|0101
+| heat84         | H |1000|1000|0000|0100|1110|0100|0110
+| heat86         | H |1000|1000|0000|0100|1111|0100|0111

lib/IRremote_Tiny/irPronto.cpp

@@ -0,0 +1,513 @@
+#define TEST 0
+
+#if TEST
+#	define SEND_PRONTO        1
+#	define PRONTO_ONCE        false
+#	define PRONTO_REPEAT      true
+#	define PRONTO_FALLBACK    true
+#	define PRONTO_NOFALLBACK  false
+#endif
+
+#if SEND_PRONTO
+
+//******************************************************************************
+#if TEST
+#	include <stdio.h>
+	void  enableIROut (int freq)  { printf("\nFreq = %d KHz\n", freq); }
+	void  mark        (int t)     { printf("+%d," , t); }
+	void  space       (int t)     { printf("-%d, ", t); }
+#else
+#	include "IRremote.h"
+#endif // TEST
+
+//+=============================================================================
+// Check for a valid hex digit
+//
+bool  ishex (char ch)
+{
+	return ( ((ch >= '0') && (ch <= '9')) ||
+             ((ch >= 'A') && (ch <= 'F')) ||
+             ((ch >= 'a') && (ch <= 'f'))   ) ? true : false ;
+}
+
+//+=============================================================================
+// Check for a valid "blank" ... '\0' is a valid "blank"
+//
+bool  isblank (char ch)
+{
+	return ((ch == ' ') || (ch == '\t') || (ch == '\0')) ? true : false ;
+}
+
+//+=============================================================================
+// Bypass spaces
+//
+bool  byp (char** pcp)
+{
+	while (isblank(**pcp))  (*pcp)++ ;
+}
+
+//+=============================================================================
+// Hex-to-Byte : Decode a hex digit
+// We assume the character has already been validated
+//
+uint8_t  htob (char ch)
+{
+	if ((ch >= '0') && (ch <= '9'))  return ch - '0' ;
+	if ((ch >= 'A') && (ch <= 'F'))  return ch - 'A' + 10 ;
+	if ((ch >= 'a') && (ch <= 'f'))  return ch - 'a' + 10 ;
+}
+
+//+=============================================================================
+// Hex-to-Word : Decode a block of 4 hex digits
+// We assume the string has already been validated
+//   and the pointer being passed points at the start of a block of 4 hex digits
+//
+uint16_t  htow (char* cp)
+{
+	return ( (htob(cp[0]) << 12) | (htob(cp[1]) <<  8) |
+             (htob(cp[2]) <<  4) | (htob(cp[3])      )  ) ;
+}
+
+//+=============================================================================
+//
+bool sendPronto (char* s,  bool repeat,  bool fallback)
+{
+	int       i;
+	int       len;
+	int       skip;
+	char*     cp;
+	uint16_t  freq;  // Frequency in KHz
+	uint8_t   usec;  // pronto uSec/tick
+	uint8_t   once;
+	uint8_t   rpt;
+
+	// Validate the string
+	for (cp = s;  *cp;  cp += 4) {
+		byp(&cp);
+		if ( !ishex(cp[0]) || !ishex(cp[1]) ||
+		     !ishex(cp[2]) || !ishex(cp[3]) || !isblank(cp[4]) )  return false ;
+	}
+
+	// We will use cp to traverse the string
+	cp = s;
+
+	// Check mode = Oscillated/Learned
+	byp(&cp);
+	if (htow(cp) != 0000)  return false;
+	cp += 4;
+
+	// Extract & set frequency
+	byp(&cp);
+	freq = (int)(1000000 / (htow(cp) * 0.241246));  // Rounding errors will occur, tolerance is +/- 10%
+	usec = (int)(((1.0 / freq) * 1000000) + 0.5);  // Another rounding error, thank Cod for analogue electronics
+	freq /= 1000;  // This will introduce a(nother) rounding error which we do not want in the usec calcualtion
+	cp += 4;
+
+	// Get length of "once" code
+	byp(&cp);
+	once = htow(cp);
+	cp += 4;
+
+	// Get length of "repeat" code
+	byp(&cp);
+	rpt = htow(cp);
+	cp += 4;
+
+	// Which code are we sending?
+	if (fallback) { // fallback on the "other" code if "this" code is not present
+		if (!repeat) { // requested 'once'
+			if (once)  len = once * 2,  skip = 0 ;  // if once exists send it
+			else       len = rpt  * 2,  skip = 0 ;  // else send repeat code
+		} else { // requested 'repeat'
+			if (rpt)   len = rpt  * 2,  skip = 0 ;  // if rpt exists send it
+			else       len = once * 2,  skip = 0 ;  // else send once code
+		}
+	} else {  // Send what we asked for, do not fallback if the code is empty!
+		if (!repeat)  len = once * 2,  skip = 0 ;     // 'once' starts at 0
+		else          len = rpt  * 2,  skip = once ;  // 'repeat' starts where 'once' ends
+    }
+
+	// Skip to start of code
+	for (i = 0;  i < skip;  i++, cp += 4)  byp(&cp) ;
+
+	// Send code
+	enableIROut(freq);
+	for (i = 0;  i < len;  i++) {
+		byp(&cp);
+		if (i & 1)  space(htow(cp) * usec);
+		else        mark (htow(cp) * usec);
+		cp += 4;
+	}
+}
+
+//+=============================================================================
+#if TEST
+
+int  main ( )
+{
+	char  prontoTest[] =
+		"0000 0070 0000 0032 0080 0040 0010 0010 0010 0030 " //  10
+		"0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 " //  20
+		"0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 " //  30
+		"0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 " //  40
+		"0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 " //  50
+		"0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 " //  60
+		"0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 " //  70
+		"0010 0010 0010 0030 0010 0010 0010 0030 0010 0010 " //  80
+		"0010 0010 0010 0030 0010 0010 0010 0010 0010 0030 " //  90
+		"0010 0010 0010 0030 0010 0010 0010 0010 0010 0030 " // 100
+		"0010 0030 0010 0aa6";                               // 104
+
+	sendPronto(prontoTest, PRONTO_ONCE,   PRONTO_FALLBACK);    // once code
+	sendPronto(prontoTest, PRONTO_REPEAT, PRONTO_FALLBACK);    // repeat code
+	sendPronto(prontoTest, PRONTO_ONCE,   PRONTO_NOFALLBACK);  // once code
+	sendPronto(prontoTest, PRONTO_REPEAT, PRONTO_NOFALLBACK);  // repeat code
+
+	return 0;
+}
+
+#endif // TEST
+
+#endif // SEND_PRONTO
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#if 0
+//******************************************************************************
+// Sources:
+//   http://www.remotecentral.com/features/irdisp2.htm
+//   http://www.hifi-remote.com/wiki/index.php?title=Working_With_Pronto_Hex
+//******************************************************************************
+
+#include <stdint.h>
+#include <stdio.h>
+
+#define IRPRONTO
+#include "IRremoteInt.h"  // The Arduino IRremote library defines USECPERTICK
+
+//------------------------------------------------------------------------------
+// Source: https://www.google.co.uk/search?q=DENON+MASTER+IR+Hex+Command+Sheet
+//         -> http://assets.denon.com/documentmaster/us/denon%20master%20ir%20hex.xls
+//
+char  prontoTest[] =
+	"0000 0070 0000 0032 0080 0040 0010 0010 0010 0030 " //  10
+	"0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 " //  20
+	"0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 " //  30
+	"0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 " //  40
+	"0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 " //  50
+	"0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 " //  60
+	"0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 " //  70
+	"0010 0010 0010 0030 0010 0010 0010 0030 0010 0010 " //  80
+	"0010 0010 0010 0030 0010 0010 0010 0010 0010 0030 " //  90
+	"0010 0010 0010 0030 0010 0010 0010 0010 0010 0030 " // 100
+	"0010 0030 0010 0aa6";                               // 104
+
+//------------------------------------------------------------------------------
+// This is the longest code we can support
+#define CODEMAX  200
+
+//------------------------------------------------------------------------------
+// This is the data we pull out of the pronto code
+typedef
+	struct {
+		int        freq;           // Carrier frequency (in Hz)
+		int        usec;           // uSec per tick (based on freq)
+
+		int        codeLen;        // Length of code
+		uint16_t   code[CODEMAX];  // Code in hex
+
+		int        onceLen;        // Length of "once" transmit
+		uint16_t*  once;           // Pointer to start within 'code'
+
+		int        rptLen;         // Length of "repeat" transmit
+		uint16_t*  rpt;            // Pointer to start within 'code'
+	}
+pronto_t;
+
+//------------------------------------------------------------------------------
+// From what I have seen, the only time we go over 8-bits is the 'space'
+// on the end which creates the lead-out/inter-code gap.  Assuming I'm right,
+// we can code this up as a special case and otherwise halve the size of our
+// data!
+// Ignoring the first four values (the config data) and the last value
+// (the lead-out), if you find a protocol that uses values greater than 00fe
+// we are going to have to revisit this code!
+//
+//
+// So, the 0th byte will be the carrier frequency in Khz (NOT Hz)
+//      "  1st  "    "   "   "  length of the "once" code
+//      "  2nd  "    "   "   "  length of the "repeat" code
+//
+// Thereafter, odd  bytes will be Mark  lengths as a multiple of USECPERTICK uS
+//             even   "     "  "  Space    "    "  "    "     "       "      "
+//
+// Any occurence of "FF" in either a Mark or a Space will indicate
+//   "Use the 16-bit FF value" which will also be a multiple of USECPERTICK uS
+//
+//
+// As a point of comparison, the test code (prontoTest[]) is 520 bytes
+// (yes, more than 0.5KB of our Arduino's precious 32KB) ... after conversion
+// to pronto hex that goes down to ((520/5)*2) = 208 bytes ... once converted to
+// our format we are down to ((208/2) -1 -1 +2) = 104 bytes
+//
+// In fariness this is still very memory-hungry
+// ...As a rough guide:
+//   10 codes cost 1K of memory (this will vary depending on the protocol).
+//
+// So if you're building a complex remote control, you will probably need to
+// keep the codes on an external memory device (not in the Arduino sketch) and
+// load them as you need them.  Hmmm.
+//
+// This dictates that "Oscillated Pronto Codes" are probably NOT the way forward
+//
+// For example, prontoTest[] happens to be: A 48-bit IR code in Denon format
+// So we know it starts with 80/40                           (Denon header)
+//             and ends with 10/aa6                          (Denon leadout)
+//             and all (48) bits in between are either 10/10 (Denon 0)
+//                                                  or 10/30 (Denon 1)
+// So we could easily store this data in 1-byte  ("Denon")
+//                                     + 1-byte  (Length=48)
+//                                     + 6-bytes (IR code)
+// At 8-bytes per code, we can store 128 codes in 1KB or memory - that's a lot
+// better than the 2 (two) we started off with!
+//
+// And serendipitously, by reducing the amount of data, our program will run
+// a LOT faster!
+//
+// Again, I repeat, even after you have spent time converting the "Oscillated
+// Pronto Codes" in to IRremote format, it will be a LOT more memory-hungry
+// than using sendDenon() (or whichever) ...BUT these codes are easily
+// available on the internet, so we'll support them!
+//
+typedef
+	struct {
+		uint16_t   FF;
+		uint8_t    code[CODEMAX];
+	}
+irCode_t;
+
+//------------------------------------------------------------------------------
+#define DEBUGF(...)  printf(__VA_ARGS__)
+
+//+=============================================================================
+// String must be block of 4 hex digits separated with blanks
+//
+bool  validate (char* cp,  int* len)
+{
+	for (*len = 0;  *cp;  (*len)++, cp += 4) {
+		byp(&cp);
+		if ( !ishex(cp[0]) || !ishex(cp[1]) ||
+		     !ishex(cp[2]) || !ishex(cp[3]) || !isblank(cp[4]) )  return false ;
+	}
+
+	return true;
+}
+
+//+=============================================================================
+// Hex-to-Byte : Decode a hex digit
+// We assume the character has already been validated
+//
+uint8_t  htob (char ch)
+{
+	if ((ch >= '0') && (ch <= '9'))  return ch - '0' ;
+	if ((ch >= 'A') && (ch <= 'F'))  return ch - 'A' + 10 ;
+	if ((ch >= 'a') && (ch <= 'f'))  return ch - 'a' + 10 ;
+}
+
+//+=============================================================================
+// Hex-to-Word : Decode a block of 4 hex digits
+// We assume the string has already been validated
+//   and the pointer being passed points at the start of a block of 4 hex digits
+//
+uint16_t  htow (char* cp)
+{
+	return ( (htob(cp[0]) << 12) | (htob(cp[1]) <<  8) |
+             (htob(cp[2]) <<  4) | (htob(cp[3])      )  ) ;
+}
+
+//+=============================================================================
+// Convert the pronto string in to data
+//
+bool  decode (char* s,  pronto_t* p,  irCode_t* ir)
+{
+	int    i, len;
+	char*  cp;
+
+	// Validate the Pronto string
+	if (!validate(s, &p->codeLen)) {
+		DEBUGF("Invalid pronto string\n");
+		return false ;
+    }
+	DEBUGF("Found %d hex codes\n", p->codeLen);
+
+	// Allocate memory to store the decoded string
+	//if (!(p->code = malloc(p->len))) {
+	//	DEBUGF("Memory allocation failed\n");
+	//	return false ;
+	//}
+
+	// Check in case our code is too long
+	if (p->codeLen > CODEMAX) {
+		DEBUGF("Code too long, edit CODEMAX and recompile\n");
+		return false ;
+	}
+
+	// Decode the string
+	cp = s;
+	for (i = 0;  i < p->codeLen;  i++, cp += 4) {
+		byp(&cp);
+		p->code[i] = htow(cp);
+	}
+
+	// Announce our findings
+	DEBUGF("Input: |%s|\n", s);
+	DEBUGF("Found: |");
+    for (i = 0;  i < p->codeLen;  i++)  DEBUGF("%04x ", p->code[i]) ;
+	DEBUGF("|\n");
+
+	DEBUGF("Form [%04X] : ", p->code[0]);
+	if      (p->code[0] == 0x0000)  DEBUGF("Oscillated (Learned)\n");
+	else if (p->code[0] == 0x0100)  DEBUGF("Unmodulated\n");
+	else                            DEBUGF("Unknown\n");
+    if (p->code[0] != 0x0000)  return false ;  // Can only handle Oscillated
+
+	// Calculate the carrier frequency (+/- 10%) & uSecs per pulse
+	// Pronto uses a crystal which generates a timeabse of 0.241246
+	p->freq     = (int)(1000000 / (p->code[1] * 0.241246));
+	p->usec     = (int)(((1.0 / p->freq) * 1000000) + 0.5);
+	ir->code[0] = p->freq / 1000;
+    DEBUGF("Freq [%04X] : %d Hz  (%d uS/pluse) -> %d KHz\n",
+	       p->code[1], p->freq, p->usec, ir->code[0]);
+
+	// Set the length & start pointer for the "once" code
+	p->onceLen  = p->code[2];
+	p->once     = &p->code[4];
+	ir->code[1] = p->onceLen;
+	DEBUGF("Once [%04X] : %d\n", p->code[2], p->onceLen);
+
+	// Set the length & start pointer for the "repeat" code
+	p->rptLen = p->code[3];
+	p->rpt    = &p->code[4 + p->onceLen];
+	ir->code[2] = p->rptLen;
+	DEBUGF("Rpt  [%04X] : %d\n", p->code[3], p->rptLen);
+
+	// Check everything tallies
+	if (1 + 1 + 1 + 1 + (p->onceLen * 2) + (p->rptLen * 2) != p->codeLen) {
+		DEBUGF("Bad code length\n");
+		return false;
+	}
+
+	// Convert the IR data to our new format
+	ir->FF = p->code[p->codeLen - 1];
+
+	len = (p->onceLen * 2) + (p->rptLen * 2);
+	DEBUGF("Encoded: |");
+	for (i = 0;  i < len;  i++) {
+		if (p->code[i+4] == ir->FF) {
+			ir->code[i+3] = 0xFF;
+		} else if (p->code[i+4] > 0xFE) {
+			DEBUGF("\n%04X : Mark/Space overflow\n", p->code[i+4]);
+			return false;
+		} else {
+			ir->code[i+3] = (p->code[i+4] * p->usec) / USECPERTICK;
+		}
+		DEBUGF("%s%d", !i ? "" : (i&1 ? "," : ", "), ir->code[i+3]);
+	}
+	DEBUGF("|\n");
+
+	ir->FF = (ir->FF * p->usec) / USECPERTICK;
+	DEBUGF("FF -> %d\n", ir->FF);
+
+	return true;
+}
+
+//+=============================================================================
+//
+void  irDump (irCode_t* ir)
+{
+	int  i, len;
+
+	printf("uint8_t  buttonName[%d] = {", len);
+
+	printf("%d,%d, ", (ir->FF >> 8), ir->FF & 0xFF);
+	printf("%d,%d,%d, ", ir->code[0], ir->code[1], ir->code[2]);
+
+	len = (ir->code[1] * 2) + (ir->code[2] * 2);
+	for (i = 0;  i < len;  i++) {
+		printf("%s%d", !i ? "" : (i&1 ? "," : ", "), ir->code[i+3]);
+	}
+
+	printf("};\n");
+
+}
+
+//+=============================================================================
+//
+int  main ( )
+{
+	pronto_t  pCode;
+	irCode_t  irCode;
+
+	decode(prontoTest, &pCode, &irCode);
+
+	irDump(&irCode);
+
+	return 0;
+}
+
+#endif //0

lib/IRremote_Tiny/irRecv.cpp

@@ -0,0 +1,213 @@
+#include "IRremote.h"
+#include "IRremoteInt.h"
+
+//+=============================================================================
+// Decodes the received IR message
+// Returns 0 if no data ready, 1 if data ready.
+// Results of decoding are stored in results
+//
+int  IRrecv::decode (decode_results *results)
+{
+	results->rawbuf   = irparams.rawbuf;
+	results->rawlen   = irparams.rawlen;
+
+	results->overflow = irparams.overflow;
+
+	if (irparams.rcvstate != STATE_STOP)  return false ;
+
+#if DECODE_NEC
+	DBG_PRINTLN("Attempting NEC decode");
+	if (decodeNEC(results))  return true ;
+#endif
+
+#if DECODE_SONY
+	DBG_PRINTLN("Attempting Sony decode");
+	if (decodeSony(results))  return true ;
+#endif
+
+#if DECODE_SANYO
+	DBG_PRINTLN("Attempting Sanyo decode");
+	if (decodeSanyo(results))  return true ;
+#endif
+
+#if DECODE_MITSUBISHI
+	DBG_PRINTLN("Attempting Mitsubishi decode");
+	if (decodeMitsubishi(results))  return true ;
+#endif
+
+#if DECODE_RC5
+	DBG_PRINTLN("Attempting RC5 decode");
+	if (decodeRC5(results))  return true ;
+#endif
+
+#if DECODE_RC6
+	DBG_PRINTLN("Attempting RC6 decode");
+	if (decodeRC6(results))  return true ;
+#endif
+
+#if DECODE_PANASONIC
+	DBG_PRINTLN("Attempting Panasonic decode");
+	if (decodePanasonic(results))  return true ;
+#endif
+
+#if DECODE_LG
+	DBG_PRINTLN("Attempting LG decode");
+	if (decodeLG(results))  return true ;
+#endif
+
+#if DECODE_JVC
+	DBG_PRINTLN("Attempting JVC decode");
+	if (decodeJVC(results))  return true ;
+#endif
+
+#if DECODE_SAMSUNG
+	DBG_PRINTLN("Attempting SAMSUNG decode");
+	if (decodeSAMSUNG(results))  return true ;
+#endif
+
+#if DECODE_WHYNTER
+	DBG_PRINTLN("Attempting Whynter decode");
+	if (decodeWhynter(results))  return true ;
+#endif
+
+#if DECODE_AIWA_RC_T501
+	DBG_PRINTLN("Attempting Aiwa RC-T501 decode");
+	if (decodeAiwaRCT501(results))  return true ;
+#endif
+
+#if DECODE_DENON
+	DBG_PRINTLN("Attempting Denon decode");
+	if (decodeDenon(results))  return true ;
+#endif
+
+	// decodeHash returns a hash on any input.
+	// Thus, it needs to be last in the list.
+	// If you add any decodes, add them before this.
+	if (decodeHash(results))  return true ;
+
+	// Throw away and start over
+	resume();
+	return false;
+}
+
+//+=============================================================================
+IRrecv::IRrecv (int recvpin)
+{
+	irparams.recvpin = recvpin;
+	irparams.blinkflag = 0;
+}
+
+IRrecv::IRrecv (int recvpin, int blinkpin)
+{
+	irparams.recvpin = recvpin;
+	irparams.blinkpin = blinkpin;
+	pinMode(blinkpin, OUTPUT);
+	irparams.blinkflag = 0;
+}
+
+
+
+//+=============================================================================
+// initialization
+//
+void  IRrecv::enableIRIn ( )
+{
+	cli();
+	// Setup pulse clock timer interrupt
+	// Prescale /8 (16M/8 = 0.5 microseconds per tick)
+	// Therefore, the timer interval can range from 0.5 to 128 microseconds
+	// Depending on the reset value (255 to 0)
+	TIMER_CONFIG_NORMAL();
+
+	// Timer2 Overflow Interrupt Enable
+	TIMER_ENABLE_INTR;
+
+	TIMER_RESET;
+
+	sei();  // enable interrupts
+
+	// Initialize state machine variables
+	irparams.rcvstate = STATE_IDLE;
+	irparams.rawlen = 0;
+
+	// Set pin modes
+	pinMode(irparams.recvpin, INPUT);
+}
+
+//+=============================================================================
+// Enable/disable blinking of pin 13 on IR processing
+//
+void  IRrecv::blink13 (int blinkflag)
+{
+	irparams.blinkflag = blinkflag;
+	if (blinkflag)  pinMode(BLINKLED, OUTPUT) ;
+}
+
+//+=============================================================================
+// Return if receiving new IR signals
+// 
+bool  IRrecv::isIdle ( ) 
+{
+ return (irparams.rcvstate == STATE_IDLE || irparams.rcvstate == STATE_STOP) ? true : false;
+}
+//+=============================================================================
+// Restart the ISR state machine
+//
+void  IRrecv::resume ( )
+{
+	irparams.rcvstate = STATE_IDLE;
+	irparams.rawlen = 0;
+}
+
+//+=============================================================================
+// hashdecode - decode an arbitrary IR code.
+// Instead of decoding using a standard encoding scheme
+// (e.g. Sony, NEC, RC5), the code is hashed to a 32-bit value.
+//
+// The algorithm: look at the sequence of MARK signals, and see if each one
+// is shorter (0), the same length (1), or longer (2) than the previous.
+// Do the same with the SPACE signals.  Hash the resulting sequence of 0's,
+// 1's, and 2's to a 32-bit value.  This will give a unique value for each
+// different code (probably), for most code systems.
+//
+// http://arcfn.com/2010/01/using-arbitrary-remotes-with-arduino.html
+//
+// Compare two tick values, returning 0 if newval is shorter,
+// 1 if newval is equal, and 2 if newval is longer
+// Use a tolerance of 20%
+//
+int  IRrecv::compare (unsigned int oldval,  unsigned int newval)
+{
+	if      (newval < oldval * .8)  return 0 ;
+	else if (oldval < newval * .8)  return 2 ;
+	else                            return 1 ;
+}
+
+//+=============================================================================
+// Use FNV hash algorithm: http://isthe.com/chongo/tech/comp/fnv/#FNV-param
+// Converts the raw code values into a 32-bit hash code.
+// Hopefully this code is unique for each button.
+// This isn't a "real" decoding, just an arbitrary value.
+//
+#define FNV_PRIME_32 16777619
+#define FNV_BASIS_32 2166136261
+
+long  IRrecv::decodeHash (decode_results *results)
+{
+	long  hash = FNV_BASIS_32;
+
+	// Require at least 6 samples to prevent triggering on noise
+	if (results->rawlen < 6)  return false ;
+
+	for (int i = 1;  (i + 2) < results->rawlen;  i++) {
+		int value =  compare(results->rawbuf[i], results->rawbuf[i+2]);
+		// Add value into the hash
+		hash = (hash * FNV_PRIME_32) ^ value;
+	}
+
+	results->value       = hash;
+	results->bits        = 32;
+	results->decode_type = UNKNOWN;
+
+	return true;
+}

lib/IRremote_Tiny/irSend.cpp

@@ -0,0 +1,87 @@
+#include "IRremote.h"
+#include "IRremoteInt.h"
+
+//+=============================================================================
+void  IRsend::sendRaw (const unsigned int buf[],  unsigned int len,  unsigned int hz)
+{
+	// Set IR carrier frequency
+	enableIROut(hz);
+
+	for (unsigned int i = 0;  i < len;  i++) {
+		if (i & 1)  space(buf[i]) ;
+		else        mark (buf[i]) ;
+	}
+
+	space(0);  // Always end with the LED off
+}
+
+//+=============================================================================
+// Sends an IR mark for the specified number of microseconds.
+// The mark output is modulated at the PWM frequency.
+//
+void  IRsend::mark (unsigned int time)
+{
+	TIMER_ENABLE_PWM; // Enable pin 3 PWM output
+	if (time > 0) custom_delay_usec(time);
+}
+
+//+=============================================================================
+// Leave pin off for time (given in microseconds)
+// Sends an IR space for the specified number of microseconds.
+// A space is no output, so the PWM output is disabled.
+//
+void  IRsend::space (unsigned int time)
+{
+	TIMER_DISABLE_PWM; // Disable pin 3 PWM output
+	if (time > 0) IRsend::custom_delay_usec(time);
+}
+
+
+
+
+
+//+=============================================================================
+// Enables IR output.  The khz value controls the modulation frequency in kilohertz.
+// The IR output will be on pin 3 (OC2B).
+// This routine is designed for 36-40KHz; if you use it for other values, it's up to you
+// to make sure it gives reasonable results.  (Watch out for overflow / underflow / rounding.)
+// TIMER2 is used in phase-correct PWM mode, with OCR2A controlling the frequency and OCR2B
+// controlling the duty cycle.
+// There is no prescaling, so the output frequency is 16MHz / (2 * OCR2A)
+// To turn the output on and off, we leave the PWM running, but connect and disconnect the output pin.
+// A few hours staring at the ATmega documentation and this will all make sense.
+// See my Secrets of Arduino PWM at http://arcfn.com/2009/07/secrets-of-arduino-pwm.html for details.
+//
+void  IRsend::enableIROut (int khz)
+{
+	// Disable the Timer2 Interrupt (which is used for receiving IR)
+	TIMER_DISABLE_INTR; //Timer2 Overflow Interrupt
+
+	pinMode(TIMER_PWM_PIN, OUTPUT);
+	digitalWrite(TIMER_PWM_PIN, LOW); // When not sending PWM, we want it low
+
+	// COM2A = 00: disconnect OC2A
+	// COM2B = 00: disconnect OC2B; to send signal set to 10: OC2B non-inverted
+	// WGM2 = 101: phase-correct PWM with OCRA as top
+	// CS2  = 000: no prescaling
+	// The top value for the timer.  The modulation frequency will be SYSCLOCK / 2 / OCR2A.
+	TIMER_CONFIG_KHZ(khz);
+}
+
+//+=============================================================================
+// Custom delay function that circumvents Arduino's delayMicroseconds limit
+
+void IRsend::custom_delay_usec(unsigned long uSecs) {
+  if (uSecs > 4) {
+    unsigned long start = micros();
+    unsigned long endMicros = start + uSecs - 4;
+    if (endMicros < start) { // Check if overflow
+      while ( micros() > start ) {} // wait until overflow
+    }
+    while ( micros() < endMicros ) {} // normal wait
+  } 
+  //else {
+  //  __asm__("nop\n\t"); // must have or compiler optimizes out
+  //}
+}
+

lib/IRremote_Tiny/ir_Aiwa.cpp

@@ -0,0 +1,105 @@
+#include "IRremote.h"
+#include "IRremoteInt.h"
+
+//==============================================================================
+//                         AAA   IIIII  W   W   AAA
+//                        A   A    I    W   W  A   A
+//                        AAAAA    I    W W W  AAAAA
+//                        A   A    I    W W W  A   A
+//                        A   A  IIIII   WWW   A   A
+//==============================================================================
+
+// Based off the RC-T501 RCU
+// Lirc file http://lirc.sourceforge.net/remotes/aiwa/RC-T501
+
+#define AIWA_RC_T501_HZ            38
+#define AIWA_RC_T501_BITS          15
+#define AIWA_RC_T501_PRE_BITS      26
+#define AIWA_RC_T501_POST_BITS      1
+#define AIWA_RC_T501_SUM_BITS    (AIWA_RC_T501_PRE_BITS + AIWA_RC_T501_BITS + AIWA_RC_T501_POST_BITS)
+#define AIWA_RC_T501_HDR_MARK    8800
+#define AIWA_RC_T501_HDR_SPACE   4500
+#define AIWA_RC_T501_BIT_MARK     500
+#define AIWA_RC_T501_ONE_SPACE    600
+#define AIWA_RC_T501_ZERO_SPACE  1700
+
+//+=============================================================================
+#if SEND_AIWA_RC_T501
+void  IRsend::sendAiwaRCT501 (int code)
+{
+	unsigned long  pre = 0x0227EEC0;  // 26-bits
+
+	// Set IR carrier frequency
+	enableIROut(AIWA_RC_T501_HZ);
+
+	// Header
+	mark(AIWA_RC_T501_HDR_MARK);
+	space(AIWA_RC_T501_HDR_SPACE);
+
+	// Send "pre" data
+	for (unsigned long  mask = 1UL << (26 - 1);  mask;  mask >>= 1) {
+		mark(AIWA_RC_T501_BIT_MARK);
+		if (pre & mask)  space(AIWA_RC_T501_ONE_SPACE) ;
+		else             space(AIWA_RC_T501_ZERO_SPACE) ;
+	}
+
+//-v- THIS CODE LOOKS LIKE IT MIGHT BE WRONG - CHECK!
+//    it only send 15bits and ignores the top bit
+//    then uses TOPBIT which is 0x80000000 to check the bit code
+//    I suspect TOPBIT should be changed to 0x00008000
+
+	// Skip first code bit
+	code <<= 1;
+	// Send code
+	for (int  i = 0;  i < 15;  i++) {
+		mark(AIWA_RC_T501_BIT_MARK);
+		if (code & 0x80000000)  space(AIWA_RC_T501_ONE_SPACE) ;
+		else                    space(AIWA_RC_T501_ZERO_SPACE) ;
+		code <<= 1;
+	}
+
+//-^- THIS CODE LOOKS LIKE IT MIGHT BE WRONG - CHECK!
+
+	// POST-DATA, 1 bit, 0x0
+	mark(AIWA_RC_T501_BIT_MARK);
+	space(AIWA_RC_T501_ZERO_SPACE);
+
+	mark(AIWA_RC_T501_BIT_MARK);
+	space(0);
+}
+#endif
+
+//+=============================================================================
+#if DECODE_AIWA_RC_T501
+bool  IRrecv::decodeAiwaRCT501 (decode_results *results)
+{
+	int  data   = 0;
+	int  offset = 1;
+
+	// Check SIZE
+	if (irparams.rawlen < 2 * (AIWA_RC_T501_SUM_BITS) + 4)  return false ;
+
+	// Check HDR Mark/Space
+	if (!MATCH_MARK (results->rawbuf[offset++], AIWA_RC_T501_HDR_MARK ))  return false ;
+	if (!MATCH_SPACE(results->rawbuf[offset++], AIWA_RC_T501_HDR_SPACE))  return false ;
+
+	offset += 26;  // skip pre-data - optional
+	while(offset < irparams.rawlen - 4) {
+		if (MATCH_MARK(results->rawbuf[offset], AIWA_RC_T501_BIT_MARK))  offset++ ;
+		else                                                             return false ;
+
+		// ONE & ZERO
+		if      (MATCH_SPACE(results->rawbuf[offset], AIWA_RC_T501_ONE_SPACE))   data = (data << 1) | 1 ;
+		else if (MATCH_SPACE(results->rawbuf[offset], AIWA_RC_T501_ZERO_SPACE))  data = (data << 1) | 0 ;
+		else                                                                     break ;  // End of one & zero detected
+		offset++;
+	}
+
+	results->bits = (offset - 1) / 2;
+	if (results->bits < 42)  return false ;
+
+	results->value       = data;
+	results->decode_type = AIWA_RC_T501;
+	return true;
+}
+#endif

lib/IRremote_Tiny/ir_Denon.cpp

@@ -0,0 +1,94 @@
+#include "IRremote.h"
+#include "IRremoteInt.h"
+
+// Reverse Engineered by looking at RAW dumps generated by IRremote
+
+// I have since discovered that Denon publish all their IR codes:
+//  https://www.google.co.uk/search?q=DENON+MASTER+IR+Hex+Command+Sheet
+//  -> http://assets.denon.com/documentmaster/us/denon%20master%20ir%20hex.xls
+
+// Having looked at the official Denon Pronto sheet and reverse engineered
+// the timing values from it, it is obvious that Denon have a range of
+// different timings and protocols ...the values here work for my AVR-3801 Amp!
+
+//==============================================================================
+//                    DDDD   EEEEE  N   N   OOO   N   N
+//                     D  D  E      NN  N  O   O  NN  N
+//                     D  D  EEE    N N N  O   O  N N N
+//                     D  D  E      N  NN  O   O  N  NN
+//                    DDDD   EEEEE  N   N   OOO   N   N
+//==============================================================================
+
+#define BITS          14  // The number of bits in the command
+
+#define HDR_MARK     300  // The length of the Header:Mark
+#define HDR_SPACE    750  // The lenght of the Header:Space
+
+#define BIT_MARK     300  // The length of a Bit:Mark
+#define ONE_SPACE   1800  // The length of a Bit:Space for 1's
+#define ZERO_SPACE   750  // The length of a Bit:Space for 0's
+
+//+=============================================================================
+//
+#if SEND_DENON
+void  IRsend::sendDenon (unsigned long data,  int nbits)
+{
+	// Set IR carrier frequency
+	enableIROut(38);
+
+	// Header
+	mark (HDR_MARK);
+	space(HDR_SPACE);
+
+	// Data
+	for (unsigned long  mask = 1UL << (nbits - 1);  mask;  mask >>= 1) {
+		if (data & mask) {
+			mark (BIT_MARK);
+			space(ONE_SPACE);
+		} else {
+			mark (BIT_MARK);
+			space(ZERO_SPACE);
+		}
+	}
+
+	// Footer
+	mark(BIT_MARK);
+    space(0);  // Always end with the LED off
+}
+#endif
+
+//+=============================================================================
+//
+#if DECODE_DENON
+bool  IRrecv::decodeDenon (decode_results *results)
+{
+	unsigned long  data   = 0;  // Somewhere to build our code
+	int            offset = 1;  // Skip the Gap reading
+
+	// Check we have the right amount of data
+	if (irparams.rawlen != 1 + 2 + (2 * BITS) + 1)  return false ;
+
+	// Check initial Mark+Space match
+	if (!MATCH_MARK (results->rawbuf[offset++], HDR_MARK ))  return false ;
+	if (!MATCH_SPACE(results->rawbuf[offset++], HDR_SPACE))  return false ;
+
+	// Read the bits in
+	for (int i = 0;  i < BITS;  i++) {
+		// Each bit looks like: MARK + SPACE_1 -> 1
+		//                 or : MARK + SPACE_0 -> 0
+		if (!MATCH_MARK(results->rawbuf[offset++], BIT_MARK))  return false ;
+
+		// IR data is big-endian, so we shuffle it in from the right:
+		if      (MATCH_SPACE(results->rawbuf[offset], ONE_SPACE))   data = (data << 1) | 1 ;
+		else if (MATCH_SPACE(results->rawbuf[offset], ZERO_SPACE))  data = (data << 1) | 0 ;
+		else                                                        return false ;
+		offset++;
+	}
+
+	// Success
+	results->bits        = BITS;
+	results->value       = data;
+	results->decode_type = DENON;
+	return true;
+}
+#endif

lib/IRremote_Tiny/ir_Dish.cpp

@@ -0,0 +1,53 @@
+#include "IRremote.h"
+#include "IRremoteInt.h"
+
+//==============================================================================
+//                       DDDD   IIIII   SSSS  H   H
+//                        D  D    I    S      H   H
+//                        D  D    I     SSS   HHHHH
+//                        D  D    I        S  H   H
+//                       DDDD   IIIII  SSSS   H   H
+//==============================================================================
+
+// Sharp and DISH support by Todd Treece ( http://unionbridge.org/design/ircommand )
+//
+// The sned function needs to be repeated 4 times
+//
+// Only send the last for characters of the hex.
+// I.E.  Use 0x1C10 instead of 0x0000000000001C10 as listed in the LIRC file.
+//
+// Here is the LIRC file I found that seems to match the remote codes from the
+// oscilloscope:
+//   DISH NETWORK (echostar 301):
+//   http://lirc.sourceforge.net/remotes/echostar/301_501_3100_5100_58xx_59xx
+
+#define DISH_BITS          16
+#define DISH_HDR_MARK     400
+#define DISH_HDR_SPACE   6100
+#define DISH_BIT_MARK     400
+#define DISH_ONE_SPACE   1700
+#define DISH_ZERO_SPACE  2800
+#define DISH_RPT_SPACE   6200
+
+//+=============================================================================
+#if SEND_DISH
+void  IRsend::sendDISH (unsigned long data,  int nbits)
+{
+	// Set IR carrier frequency
+	enableIROut(56);
+
+	mark(DISH_HDR_MARK);
+	space(DISH_HDR_SPACE);
+
+	for (unsigned long  mask = 1UL << (nbits - 1);  mask;  mask >>= 1) {
+		if (data & mask) {
+			mark(DISH_BIT_MARK);
+			space(DISH_ONE_SPACE);
+		} else {
+			mark(DISH_BIT_MARK);
+			space(DISH_ZERO_SPACE);
+		}
+	}
+}
+#endif
+

lib/IRremote_Tiny/ir_JVC.cpp

@@ -0,0 +1,101 @@
+#include "IRremote.h"
+#include "IRremoteInt.h"
+
+//==============================================================================
+//                             JJJJJ  V   V   CCCC
+//                               J    V   V  C
+//                               J     V V   C
+//                             J J     V V   C
+//                              J       V     CCCC
+//==============================================================================
+
+#define JVC_BITS           16
+#define JVC_HDR_MARK     8000
+#define JVC_HDR_SPACE    4000
+#define JVC_BIT_MARK      600
+#define JVC_ONE_SPACE    1600
+#define JVC_ZERO_SPACE    550
+#define JVC_RPT_LENGTH  60000
+
+//+=============================================================================
+// JVC does NOT repeat by sending a separate code (like NEC does).
+// The JVC protocol repeats by skipping the header.
+// To send a JVC repeat signal, send the original code value
+//   and set 'repeat' to true
+//
+#if SEND_JVC
+void  IRsend::sendJVC (unsigned long data,  int nbits,  bool repeat)
+{
+	// Set IR carrier frequency
+	enableIROut(38);
+
+	// Only send the Header if this is NOT a repeat command
+	if (!repeat){
+		mark(JVC_HDR_MARK);
+		space(JVC_HDR_SPACE);
+	}
+
+	// Data
+	for (unsigned long  mask = 1UL << (nbits - 1);  mask;  mask >>= 1) {
+		if (data & mask) {
+			mark(JVC_BIT_MARK);
+			space(JVC_ONE_SPACE);
+		} else {
+			mark(JVC_BIT_MARK);
+			space(JVC_ZERO_SPACE);
+		}
+	}
+
+	// Footer
+    mark(JVC_BIT_MARK);
+    space(0);  // Always end with the LED off
+}
+#endif
+
+//+=============================================================================
+#if DECODE_JVC
+bool  IRrecv::decodeJVC (decode_results *results)
+{
+	long  data   = 0;
+	int   offset = 1; // Skip first space
+
+	// Check for repeat
+	if (  (irparams.rawlen - 1 == 33)
+	    && MATCH_MARK(results->rawbuf[offset], JVC_BIT_MARK)
+	    && MATCH_MARK(results->rawbuf[irparams.rawlen-1], JVC_BIT_MARK)
+	   ) {
+		results->bits        = 0;
+		results->value       = REPEAT;
+		results->decode_type = JVC;
+		return true;
+	}
+
+	// Initial mark
+	if (!MATCH_MARK(results->rawbuf[offset++], JVC_HDR_MARK))  return false ;
+
+	if (irparams.rawlen < (2 * JVC_BITS) + 1 )  return false ;
+
+	// Initial space
+	if (!MATCH_SPACE(results->rawbuf[offset++], JVC_HDR_SPACE))  return false ;
+
+	for (int i = 0;  i < JVC_BITS;  i++) {
+		if (!MATCH_MARK(results->rawbuf[offset++], JVC_BIT_MARK))  return false ;
+
+		if      (MATCH_SPACE(results->rawbuf[offset], JVC_ONE_SPACE))   data = (data << 1) | 1 ;
+		else if (MATCH_SPACE(results->rawbuf[offset], JVC_ZERO_SPACE))  data = (data << 1) | 0 ;
+		else                                                            return false ;
+		offset++;
+	}
+
+	// Stop bit
+	if (!MATCH_MARK(results->rawbuf[offset], JVC_BIT_MARK))  return false ;
+
+	// Success
+	results->bits        = JVC_BITS;
+	results->value       = data;
+	results->decode_type = JVC;
+
+	return true;
+}
+#endif
+

lib/IRremote_Tiny/ir_LG.cpp

@@ -0,0 +1,80 @@
+#include "IRremote.h"
+#include "IRremoteInt.h"
+
+//==============================================================================
+//                               L       GGGG
+//                               L      G
+//                               L      G  GG
+//                               L      G   G
+//                               LLLLL   GGG
+//==============================================================================
+
+#define LG_BITS 28
+
+#define LG_HDR_MARK 8000
+#define LG_HDR_SPACE 4000
+#define LG_BIT_MARK 600
+#define LG_ONE_SPACE 1600
+#define LG_ZERO_SPACE 550
+#define LG_RPT_LENGTH 60000
+
+//+=============================================================================
+#if DECODE_LG
+bool  IRrecv::decodeLG (decode_results *results)
+{
+    long  data   = 0;
+    int   offset = 1; // Skip first space
+
+	// Check we have the right amount of data
+    if (irparams.rawlen < (2 * LG_BITS) + 1 )  return false ;
+
+    // Initial mark/space
+    if (!MATCH_MARK(results->rawbuf[offset++], LG_HDR_MARK))  return false ;
+    if (!MATCH_SPACE(results->rawbuf[offset++], LG_HDR_SPACE))  return false ;
+
+    for (int i = 0;  i < LG_BITS;  i++) {
+        if (!MATCH_MARK(results->rawbuf[offset++], LG_BIT_MARK))  return false ;
+
+        if      (MATCH_SPACE(results->rawbuf[offset], LG_ONE_SPACE))   data = (data << 1) | 1 ;
+        else if (MATCH_SPACE(results->rawbuf[offset], LG_ZERO_SPACE))  data = (data << 1) | 0 ;
+        else                                                           return false ;
+        offset++;
+    }
+
+    // Stop bit
+    if (!MATCH_MARK(results->rawbuf[offset], LG_BIT_MARK))   return false ;
+
+    // Success
+    results->bits        = LG_BITS;
+    results->value       = data;
+    results->decode_type = LG;
+    return true;
+}
+#endif
+
+//+=============================================================================
+#if SEND_LG
+void  IRsend::sendLG (unsigned long data,  int nbits)
+{
+    // Set IR carrier frequency
+    enableIROut(38);
+
+    // Header
+    mark(LG_HDR_MARK);
+    space(LG_HDR_SPACE);
+    mark(LG_BIT_MARK);
+
+    // Data
+    for (unsigned long  mask = 1UL << (nbits - 1);  mask;  mask >>= 1) {
+        if (data & mask) {
+            space(LG_ONE_SPACE);
+            mark(LG_BIT_MARK);
+        } else {
+            space(LG_ZERO_SPACE);
+            mark(LG_BIT_MARK);
+        }
+    }
+    space(0);  // Always end with the LED off
+}
+#endif
+